How to change the region on the router Xiaomi: all the ways and nuances

Changing the region on Xiaomi router is a challenge that users face when moving, buying a device abroad or wanting to access additional features. The manufacturer artificially restricts some settings depending on the country, which can interfere with the full operation of the device. For example, in Chinese firmware there is no support for 5 GHz Wi-Fi for European channels, and in the global version advanced options such as IPv6 or VLAN can be disabled.

In this article, we will discuss all the current ways to change the region – from official (via the MiWiFi app) to alternative (via SSH or web interface), pay special attention to the nuances for popular models: Mi Router 4A, AX3600, AX6000 and Redmi Router AC2100.

Why should you change the region on the Xiaomi router?

The manufacturer links the functionality of the routers to the country of sale through the firmware.

• 📡 Wi-Fi channels are allowed in China 12-14 frequency-wise 2.4 GHz, which is banned in the EU, and 5 GHz can be blocked channels above 100.
• 🔒 Security features: Global firmware often disables options like Parent Control or Guest Network with advanced settings.
• 🌍 Interface Language: Chinese versions may not support Russian or English in the web panel.
• ⚡ Transmission power: in some regions, maximum signal power is limited (e.g. in the EU, up to 20 dBm).

In addition, a change of region may be required to:

• 🔄 Bypassing geo-restrictions in services (e.g., to connect to a service) VPN server-wise).
• 🛠️ Install alternative firmware (such as OpenWRT or Padavan) that require a pre-region change.
• 📦 Using a router in another country without losing functionality (for example, when moving from China to Russia).

⚠️ Note: Some models (e.g. Mi Router) 4C) Even after changing the firmware they may not support all Wi-Fi channels.

Official method: through the MiWiFi application

The safest method is to use the proprietary MiWiFi app (formerly Mi Router), which is suitable for most modern models, but requires:

• 📱 Smartphone on Android or iOS with an installed application.
• 🔄 Router with current firmware (update via Settings) → Update of the PO).
• 🌐 Internet connection (to download regional settings).

Step-by-step:

1. Open the MiWiFi app and connect to your router.
2. Go to Settings → Additional → Region (the name may vary depending on the version of the application).
3. Select the country you want from the list (e.g. Russia, Europe or China).
4. Confirm the change and wait for the router to restart (it will take 1-2 minutes).

If your app doesn’t have the option of changing the region, try:

• 🔄 Update MiWiFi to the latest version via Google Play or App Store.
• 📱 Install the Chinese version of the app (e.g. via APKMirror) if your model is originally intended for China.
• 🌍 Manually change the region in the settings of the smartphone to China before the launch of MiWiFi.

Update the router to the latest version

Install the latest version of the MiWiFi app

Connect the router to the Internet (via the Internet) WAN-port)

Back up your settings (in Settings → Additional → Backup)

Turn it off. VPN On a smartphone (can block access to Xiaomi servers)-->

⚠️ Attention: On models AX3600 and AX6000 If you change region, you might reset the Mesh configuration over MiWiFi.

Alternative method: via the router web interface

If MiWiFi doesn’t offer a region change option, try using a browser, which works for most models except the Mi Router 4A Gigabit Edition (it has a stripped-down web interface).

Instructions:

1. Connect to your router’s Wi-Fi network.
2. Enter 192.168.31.1 (or miwifi.com) in the browser address bar.
3. Log in (the default login and password is usually a combination with a sticker on the bottom of the router).
4. Go to Advanced Settings → System → Region (the name may be different).
5. Select the desired region and save the settings.

If the Region section is not on the menu, try:

• 🔍 Manually add to the address bar path: 192.168.31.1/cgi-bin/luci/;stok=/locale (replace stok with the current token from the browser cookie).
• 🖥️ Use Chrome or Firefox in incognito mode (some scripts are blocked by extensions).
• 📱 Connect to the router via an Ethernet cable (sometimes Wi-Fi restricts access to system settings).

Some of the firmware (for example, on Mi Router) 3G) Changing the region through the web interface leads to resetting settings DHCP. After changing the region, be sure to check the range of handouts IP-address LAN Settings to avoid conflicts on the network.

SSH region change (for advanced users)

If the official methods do not work, there is an option with SSH connection. This method requires technical skills and is suitable for models based on OpenWRT (for example, Mi Router 4A, 3G, R3P). For new routers on Qualcomm IPQ807x (for example, AX6000), it may not work.

Step-by-step:

1. Activate SSH on the router: For older firmware: go to Advanced Settings → Developer Mode and enable SSH. For new firmware: use an exploit (e.g., via Telnet).
2. Connect to your router via PuTTY (Windows) or Terminal (macOS/Linux): ssh root@192.168.31.1 The default password is your web dashboard's admin password or blank (for some models).
3. Run a command to change region (for example, to Russia): nvram set country_code=RU nvram commit reboot Country codes: CN — China RU — Russia US — USA EU — Europe

After the reboot, check the changes through the command:

iw reg get

If the region is unchanged, try changing the setting as well. wireless_regdom:

nvram set wireless_regdom=RU


nvram commit




reboot

⚠️ Attention: On routers with MiWiFi firmware R4CM (for example, AX3600) Direct editing of nvram can cause loss of communication with the 5 GHz module, in which case you will need a complete reset via the Reset button.

Through the MiWiFi app

Through the web interface

Through SSH/Telnet

I haven't tried it yet.-->

Table of compatibility of models and methods

Not all Xiaomi routers support the region change in the same way, and here are the current data on popular models (2026):

For models older than 2019 (for example, Mi Router 3 or Mini), you may need to roll back the firmware to an earlier version, as new builds remove the functionality of changing the region.

What if the router “blinked” after the change of region?

Incorrect region change (especially through SSH) can lead to:

• 🔴 Loss of access to the web interface.
• 📶 No Wi-Fi network (router does not give signal).
• 🔌 Freeze at the loading stage (blink all indicators).

Recovery methods:

1. Reset via Reset button: Press and hold the Reset button (usually located on the back) for 10-15 seconds. Release after flashing the indicators (the router will reboot to factory state).
2. Recovery through TFTP (For advanced: Connect your router to your PC via Ethernet. Set up a static PC. IP 192.168.31.2. Launch TFTP-server, Tftpd64) and download the original firmware.
3. Contact the service: If the router does not respond to the reset, it may be damaged NAND-In this case, only the flashing through the UART.

💡

If the router doesn't turn on after reset, try to disconnect it from power for 30 minutes, sometimes helping to unlock the power controller.

For the AX3600 and AX6000 models with a “brick” after changing the region, do not use firmware from other models - this will lead to irreversible damage to the bootloader.

How can we verify that the region has changed?

After changing the region, you need to make sure that the settings are applied correctly, and you can do this in several ways:

• 📶 Using Wi-Fi Analyzer: Use applications like WiFi Analyzer (Android) or NetSpot (macOS/Windows), So, for example, Russia needs to have channels available. 1-13 on 2.4 GHz.
• 🖥️ Through the web interface: go to Wireless Settings → Advanced and look at the list of available channels.
• 📌 Through SSH: Follow the command: iw list | grep -A 10 "Frequencies: The output should show supported frequencies for your region.

If the channels haven’t changed, try:

• 🔄 Restart the router (sometimes the settings are only applied after the second restart).
• 📋 Reset your Wi-Fi settings in Advanced Settings → Wireless → Reset.
• 🔧 Update the firmware to the latest version (new builds fix bugs with regions).

💡

On two-band routers (2.4 GHz and 5 GHz), the region can vary separately for each module.

Frequent Mistakes and How to Avoid Them

When changing regions, users often face typical problems:

1. Invalid Region Error: Reason: Select a region not supported by firmware (e.g. JP for European version). Solution: Select a region from the official list.
2. Loss of communication after reboot: Cause: DHCP or VLAN settings conflict Solution: Connect via cable and check settings in Network → LAN.
3. 5 GHz does not work after region change: Reason: Some firmwares have 5 GHz tied to the original region. Solution: Go back to the original region, then repeat the procedure with another firmware.

To minimize the risks:

• 📋 Backup your settings before changing your region (in Advanced Settings) → Backup).
• 🔌 Use a Uninterruptible Power Supply (UPS) to avoid failures when flashing.
• 📡 Check the model’s compatibility with the selected region in the forums (e.g, 4PDA).

FAQ: Answers to popular questions