Change of change IP-Router addresses are a basic but critical setup for advanced users who want to optimize their home network or integrate Xiaomi hardware into a complex infrastructure. Often, the default gateway address set by the factory conflicts with the address of the provider or other modem operating in bridge mode. In such situations, the system simply cannot distribute traffic correctly, which leads to loss of access to the Internet or inability to get into the web interface of the device management.
The procedure for changing the local address on Mi Router or Redmi Router routers does not require deep knowledge of programming, but it needs careful understanding of the basics of the protocol. DHCP. If you connect a new Xiaomi router to an existing network where there is another active router, change IP-This is a necessary step to avoid collisions, and ignoring this rule will lead to devices on the network being "lost" and unable to communicate.
In this guide, we will take a closer look at how the network interface is reconfigured, look at the hidden capabilities of the firmware, and answer questions users have when working with addressing. You will learn not only to change the numbers in the settings, but also to understand how this affects the stability of the connection. Proper network configuration is the key to high speed and no connection breaks when playing or watching high-resolution video.
Why change the standard? IP-lock-house
The standard address that is most commonly found on Xiaomi devices usually looks like 192.168.31.1 or 192.168.1.1.This unification is user-friendly but poses challenges in more complex use cases. For example, if your ISP provides access via a modem that also uses a range of 192.168.1.x, If you connect a Xiaomi router, you'll have a conflict. IP-address, otherwise the data packets will not be sent where they need to be.
In addition to eliminating conflicts, changing the subnet is necessary for network segmentation. Advanced administrators often allocate separate address ranges for guest zone, smart home and personal computers. This allows you to configure more flexible firewall rules and control traffic. By changing the gateway address to a less common one, for example, 10.0.0.1 or 172.16.0.1, you also increase the basic level of security, since automatic network scanners are less likely to check non-standard ranges.
Another reason might be that multiple routers need to be combined into a single system, where one is the main router and the other is the access point, so each node must be on a unique subnet or hurl requests correctly, which is impossible when you duplicate addresses, so understanding how to change the IP address on the Xiaomi router is a key skill for building a fault-tolerant home network.
⚠️ Attention: After the change IP-All connected devices will lose their connection to the Internet before they reconnect. Computers and smartphones will try to log in to the network using old settings that are no longer relevant.
Preparing for changes in network settings
Before making any changes to the configuration of network equipment, you need to conduct a number of preparatory activities, which will help to avoid a situation where after changing the settings you lose access to the admin panel and can not return everything back. First of all, make sure that your control device (laptop or PC) is connected to the Xiaomi router via a device. LAN-cable: Wi-Fi wireless connection used at the time of change IP-addresses are not recommended, as the communication break may interrupt the process of saving settings.
You also need to know the current login address of the control panel. It's usually written on a sticker on the bottom of the device, but if you've changed it before and forgotten it, you can find it through the command line. On a Windows computer, open the terminal and type in the ipconfig command. Find the "Default Gateway" line, the numbers that are listed there are the current address of your router.
☑️ Checking before setting up the network
It's important to have the login data on hand. If you've never changed your administrator password, try the standard combinations or the ones listed on the label. Modern Mi Router models often use the password you came up with when you first set up your Wi-Fi network, and without that, you won't be able to access the Settings section of the network.
Step-by-step instructions: entering the interface and changing the address
The process of changing the local network address on Xiaomi routers is quite logical, although the interface may differ depending on the firmware version (Chinese or global). After connecting the cable, open any browser and enter the current one in the address bar. IP-The router's address is usually 192.168.31.1 or the domain name miwifi.com. Enter the administrator password to log in.
Once you have successfully logged in, you need to find the partition that handles the local network settings, depending on the interface version, this section may be called Settings, Common Settings, or LAN Settings (Settings) LAN). In Chinese firmware, look for characters that mean "Network settings" (usually the second or third item on the menu). IP Address or Router IP.
Change the address to the desired one. Remember that the last digit (octet) is usually reserved for the router itself, and the range of available addresses for customers is set by the subnet mask. The standard mask 255.255.255.0 allows you to use addresses from 1 to 254. Once you enter a new address, the system will ask you to confirm the action. The router will apply the settings and most likely reboot. From now on, you will need to use a new address to log into the control panel.
| Parameter | Standard value | Recommended value (example) | Description |
|---|---|---|---|
| IP-router | 192.168.31.1 | 192.168.10.1 | The main gateway address for entering the settings |
| Subnet mask | 255.255.255.0 | 255.255.255.0 | Determine the size of the local network |
| The Beginning of DHCP | 192.168.31.2 | 192.168.10.2 | First address issued to devices |
| The End of DHCP | 192.168.31.254 | 192.168.10.254 | Last address in the issuing pool |
What to do if you forget a new one IP-address?
Setting up DHCP-server-pool
When changing IP-The address of the router itself is critically important to pay attention to the built-in settings DHCP-This service automatically distributes IP-Addresses to all connected devices (smartphones, TVs, laptops) If you changed the router address to 192.168.10.1, but the range of outputs is DHCP remained 192.168.31.x, The new devices will not be able to get the correct settings and go online.
In the settings section LAN Find the parameters "Start" IP" (Initial. IP) and IP" (Finite IP). They must be on the same subnet as the new router address, for example, if the gateway is 192.168.50.1, the initial address is the same. DHCP The final address should be 192.168.50.2, and the final address should be any within that network, such as 192.168.50.200. Limiting the number of addresses (pool) helps reserve a portion of the range for static assignments if you plan to configure servers or printers in the future.
Also available in this section is a Lease Time setting, which is 120 minutes or 24 hours by default. For a home network where devices rarely connect, you can increase this time to reduce the load on the Xiaomi router processor. However, for guest networks where people connect briefly, it is better to leave standard values or reduce them so that addresses are released faster.
⚠️ Attention: Do not set the range DHCP If the address pool runs out, the new gadgets of the guests will not be able to connect to Wi-Fi, even if the password is correct.
💡
Advice: For static devices (printers, NAS, It is better to set up the reservation of addresses (Address Reservation) MAC-address in the same section DHCP, so IP never changed.
Solving Access Problems After Changing Settings
The most common problem after a shift IP-Addresses are the loss of Internet connection on your computer, and that's because your PC continues to use the old network settings that it received from the router, and the operating system remembers the old gateway and tries to send requests to the place where the hardware with that address is no longer available. As a result, the browser writes “No Internet access” or “Page not found".
To solve this problem, you need to update the network settings on the client device, the easiest way to disconnect from the Wi-Fi network and connect again. DHCP-The server of the Xiaomi router will receive the current address of the gateway. If you use a wired connection, you may need to reconnect the cable or perform a command to reset the network stack.
In Windows, you can forcibly update your settings via the command line. Open the terminal on behalf of the administrator and type in the ipconfig /release command, and then ipconfig /renew. This will cause the network card to reset the current IP and request a new one. After this procedure, access to the Internet and the new router control panel should be restored instantly.
💡
The main rule: After the shift IP-Router addresses be sure to reconnect all devices to Wi-Fi or upgrade DHCP-renting on computers, otherwise the Internet will not work.