How to change the name of the Xiaomi router: 3 proven ways and tips for setting up a network

Changing the name of Xiaomi router is not just a cosmetic procedure, but an important step to improve the security and usability of the home network. Xiaomi_1234 or MiWiFi_5G_XXXX Not only does it look unaesthetic, it also gives a model of the device to potential attackers (SSID) Helps you find your connection faster among dozens of neighborhood access points.

In this article, we will discuss all the current ways to change the name of the router for Xiaomi Mi Router models. 3/4/4A/4C/4Q, AX1800/AX3000/AX6000 And others, both through the official Mi Wi-Fi app and the web interface (2.4 GHz + 5 GHz, where network names are set up separately, and you’ll learn why you shouldn’t use personal data in the network name and how to properly reboot your router after changes to avoid device connection issues.

Why you should change the standard name of the Xiaomi router

Manufacturers assign standard names to routers for two reasons: to simplify initial setup and to identify the model in service centers.

• 🔍 Security vulnerability: by name Xiaomi_AX3000_1234 An attacker can identify a router model and pick up known exploits for it.
• 📡 Confusion in the list of networks: if neighbors have the same routers, your network will be indistinguishable from others, which will make it difficult to connect new devices.
• 📱 Smart device problems: Some gadgets (such as Xiaomi’s robot vacuum cleaners) may confuse networks with the same names when automatically connected.
• 🔄 Difficulty changing routers: If you replace your device but keep the same network name, older devices will try to connect to a non-existent point.

Kaspersky research shows that networks with standard names are 3 times more likely to be targeted by Evil Twin attacks, where fraudsters create a fake hotspot with the same name. SSID A unique name with 8-12 characters in length, with digits added or underlined ( ) reduces the risk of hacking by 40 characters%.

Preparing for a Name Change: What to Do in advance

Before you start changing your name, follow a few simple steps to avoid connection issues:

Backup your current router settings in Mi Wi-Fi → Settings → Backup

Write down the network’s current name and password on paper (in case something goes wrong)

Make sure the router is connected to the Internet (indicator) WAN must burn blue or green)

Turn it off. VPN on the device from which you will configure the router

Check that the router has the latest firmware version (relevant for models older than 2020)-->

If you are using a dual-band router (e.g. Xiaomi) AX6000), Decide in advance whether you will:

• 🔄 Combine 2.4 GHz and 5 GHz networks under one name (convenient, but can slow down on older devices).
• 📶 Separate networks with different names (e.g, MyHome_2G and MyHome_5G) manually.

Note that if you change the network name, all connected devices (smartphones, laptops, smart appliances) will automatically shut down. They will need to reconnect with a new password. To minimize inconvenience, perform the procedure while the network is not actively used.

Once a year.

Only when buying a new device

Never changed.

As necessary-->

Method 1: Change your name through the Mi Wi-Fi app (recommended)

The official Mi Wi-Fi app is the easiest and most reliable way to change the router name, automatically determining the device model and offering optimal settings, and is relevant to the 2023-2026 versions of the app.

Steps for a shift SSID:

1. Open the Mi Wi-Fi app and connect to your network (if you’re not already connected).
2. Go to the Settings section → Wi-Fi settings.
3. Click on the Wi-Fi Name field (for dual-band routers, there will be two fields: for 2.4 GHz and 5 GHz).
4. Enter the new network name. Allowable characters: Latin, numerals, hyphen (-), accent ( ). Maximum length is 32 characters.
5. Save the changes and wait for the router to automatically restart (it will take 1-2 minutes).

Example of correct names:

• ✅ Ivanov_Home_5G
• ✅ Flat42_WiFi
• ❌ My Network (Cyrillic is not supported)
• ❌ Super#WiFi (Special Characters Prohibited)

If the router didn't restart automatically after saving the changes, do it manually: turn off the power for 10 seconds, then turn it on again. Don't use the Reset button - this will reset all settings to factory!

💡

If you have a router that supports Mesh network (such as Xiaomi Mesh System), change the name only on the main device.

Method 2: Change via web interface (for power users)

Xiaomi router web interface provides more options for fine-tuning, but requires knowledge IP-This method is suitable if you do not have access to the Mi Wi-Fi application or need to configure additional parameters (for example, hide the network).

Step instructions:

1. Find out. IP-The router address is usually 192.168.31.1 or 192.168.0.1. You can check the network settings on your computer or in the Mi Wi-Fi application.
2. Open the browser (recommended by Google Chrome or Mozilla Firefox) and type in IP-address in the address bar. Press Enter.
3. Enter the login login login and password. By default, this is the admin and password specified on the router sticker (if you haven't changed it).
4. Go to Wi-Fi Settings (or Wireless in the Russian version).
5. In the field SSID Type in a new network name. For dual-band models, there will be two setup units, 2.4 GHz and 5 GHz.
6. Press Save and confirm the changes. The router will reboot.

If the web interface becomes unavailable after the name change, check:

• 🔌 Are you connected to the router via cable (recommended for setting up).
• 🔄 Reboot your router after saving.
• 📶 Are you connected to the correct network (if you change your name, the old connection will break).

Method 3: Change the name through the Xiaomi Home app (for smart home)

If your router is integrated into the Xiaomi Smart Home ecosystem (e.g., models) AX3600 Or Mesh System, you can change the network name through the Xiaomi Home app.This method is handy if you manage all smart devices through one app.

Step-by-step:

1. Open the Xiaomi Home app and go to the Devices tab.
2. Find your router on the list and tap it.
3. Select Wi-Fi Settings (or Wi-Fi Settings in English).
4. Type a new name in the Network Name field. For Mesh systems, you can synchronize the name across all nodes.
5. Save the changes and wait for notification of a successful update.

Note that not all router settings are available in Xiaomi Home, for example, you can not change the Wi-Fi channel or turn on bridge mode. For advanced settings, use Mi Wi-Fi or the web interface.

💡

If your router is connected to Xiaomi Home, some smart devices (such as cameras or sensors) may need to be re-associated after changing the network name.

Frequent Mistakes and How to Avoid Them

Even when following the instructions, users often encounter problems, and here are the most common mistakes and ways to solve them:

⚠️ Note: if after changing the name of the network the Internet stopped working, check if the settings of the connection to the provider have gone wrong (section). WAN Sometimes the router resets these parameters when you change them. SSID.

Another common problem is the 2.4GHz and 5GHz network split. If you use the same name for both bands (like MyHome), some devices (especially older smartphones or smart appliances) may stick to the lower 2.4GHz band.

• 📵 Give different names to networks (e.g, MyHome_2G and MyHome_5G).
• 🔄 Enable Smart Connect (if available) that automatically distributes devices across ranges.

⚠️ Note: If you use a guest network, its name is changed separately under Guest Network or Guest Network. SSID It does not affect guest access.

Security Tips After Changing the Router Name

Change of change SSID — Just the first step to protecting your network, and to make your home Wi-Fi as secure as possible, follow these guidelines:

• 🔐 Change the network password: Use a combination of 12+ symbols with capital letters, numbers and underline characters: MyHome_WiFi_2026!.
• 🛡️ Turn it on. WPA3: In the security settings, select WPA3-Personal (If your router supports it, it's the most advanced encryption standard.
• 🚫 Turn it off. WPS: This feature is vulnerable to brute force attacks. WPS and deactivate it.
• 📡 Hide the network (not recommended): Disabling the broadcast SSID (Hide SSID) It does not increase security, but only complicates the connection of new devices.
• 🔄 Update the firmware: check for updates in the System Settings section → Update of the PO.

For Xiaomi models AX6000 Intrusion Prevention is now available, and turn it on in the Security section to block suspicious attempts to connect to your network.

If you frequently connect guests, set up a guest network with a separate name and password, limit its speed (for example, to 10 Mbps) and turn off access to local devices (optional). AP Isolation).

💡

To check the security of your network, use the Fing mobile app (available for Android and iOS) to show all connected devices and identify potential vulnerabilities.

FAQ: Answers to Frequent Questions