Connecting Xiaomi Mi Router 4A Beeline: full instructions with pictures and tips

Connect to Xiaomi Mi Router 4A Beeline’s Internet approach seems like a simple task, but in practice users face nuances: from incorrect PPPoE settings to problems with the Internet. DHCP or MAC-This guide will help you avoid typical errors and set up your router in 10 minutes, even if you have never worked with network hardware.

Mi Router 4A

IEEE 802.11ac

DUAL BAND

Beeline

MAC-address

VLAN ID

If you’ve just unpacked your router or decided to change providers, this article will save you time.We’re not going to list the obvious steps like “put your router on the socket,” but focus on the key settings that ensure a stable connection to Beeline without breaks and low speeds.

1. Connection Preparation: What to Check Before Setup a Router

Before you start setting up Xiaomi Mi Router 4A, Make sure you have everything you need, and that'll save you from problems like not having an Internet cable or having incorrect authorization data.

First, check the router delivery kit:

• 📦 The Mi Router itself 4A (black-and-white)
• 🔌 Power supply with cable (12V/1A)
• 📡 Ethernet cable (usually yellow, but may not be available in some sets)
• 📄 Short instructions (in Chinese/English, but you will not need them)

Second, prepare data from Beeline, which you may need to manually configure:

• 🔐 Login and password for connection (if PPPoE is used)
• 🔢 VLAN ID (If required, specify the support or contract)
• 🖥️ Is it tied? MAC-Address to your previous device (modem or router)

⚠️ Note: If you connect a router to a Beeline cable that was previously used with another device (such as a modem from a provider), you may need to clone it. MAC-address or call support to reset the link, 80% of the time it solves the problem of "no Internet" after setting up.

Also make sure that your Beeline rate is active and not blocked for non-payment, you can call 0611 (free from your mobile Beeline) or check your personal account on the provider's website.

2. Connecting the router to the network and computer: scheme and nuances

Now, let's move on to physical connectivity, and the key here is not to mix up ports and cables. 4A has:

• 1 WAN-port (blue) - for cable from the provider Beeline
• 3 LAN-port (yellow) – to connect PC, TV or other devices

Step-by-step connection scheme:

1. Insert the power cable into the router and plug it into the socket.The indicator on the front panel should light up orange (boot) and through 30-60 Seconds to turn blue (ready to adjust).
2. Connect the Internet cable from Beeline to WAN-The port (blue) has to click, which means that the connector is fixed.
3. Connect the router to a computer or laptop via LAN-port (yellow) or connect via Wi-Fi to the network Xiaomi_XXXX (password is indicated on the sticker at the bottom of the router).

If you don't have a computer, you can do the setup from your smartphone.

• 📱 Connect to the router’s Wi-Fi network (name and password on the sticker).
• 🌐 Open your browser and enter 192.168.31.1 or miwifi.com.

⚠️ Note: If you have connected the cable to WAN-Port Internet indicator on the router does not light up (or burns in red), check: 🔌 The cable is tightly inserted into the connector (try reconnecting). 🔄 Restart the router (remove the plug for 10 seconds). 📞 Check with Beeline support if the connection is blocked MAC-address.

3. Log in the web interface of the router: addresses, login and password

After you've physically connected, you need to go to the router control panel.

1. Open any browser (Chrome, Firefox, Edge).
2. Enter one of the options in the address bar: 192.168.31.1 (main) IP-address) miwifi.com (alternative domain name)

If the page does not open, check the connection to the router (by cable or Wi-Fi).

When you first log in, the system will ask for a login and password.

• 🔑 Login: admin
• 🔑 Password: Admin or the one on the router sticker.

If you have already changed your password and forgot it, you will have to reset the router settings to the factory:

1. Press and hold the Reset button (on the back) for 10 seconds.
2. Wait for the reboot (the indicators blink and light up blue).
3. Connect again and use standard login data.

Important: After resetting, all settings (including Wi-Fi) will return to factory settings, and if you've already set up your router before, you'll have to re-enter them.

Beeline cable is connected to WAN-port|

The router is on and the lights are on blue.|

Computer/phone connected to router via cable or Wi-Fi|

The browser is open on page 192.168.31.1-->

4. Beeline Internet connection setup: step-by-step instruction

Now, the most important thing is to set up the Internet connection, and depending on the type of connection Beeline provides, the steps may vary. Let's look at all the options.

Automatic setting (recommended for most users)

If Beeline is using dynamic IP (DHCP), The router must connect automatically:

1. In the web interface, select the Internet → Internet setting.
2. Set the switch to the automatic receipt position IP (DHCP).
3. Click Save and wait for the settings to apply (1-2 minute).

If the Internet is working (the indicator on the router has turned blue), you can go to the Wi-Fi setting.

Manual connection via PPPoE (if login/password is required)

Many Beeline plans use the PPPoE protocol, where you need to enter your username and password.

1. The Internet menu → Select the Internet settings PPPoE.
2. Enter the data from the contract with Beeline: 🔑 Login: usually in b{contract number format}@beeline.ru (for example, b12345678@beeline.ru) 🔑 Password: specified in the contract or SMS provider.

Additional PPPoE settings

• Install. MTU: 1480 (optimal value for Beeline).
• Turn on the Automatic Connection.
• Save the settings and wait for the connection (up to 30 seconds).

If the Internet does not appear after all the manipulations, check:

• 🔌 Correct connection of cables.
• 📞 Relevance of the tariff (possibly blocking for debts).
• 🔄 Try another browser or device to set up.

💡

If after saving the settings, the router “hangs” at the connection stage, try to disable the option. IPv6 Internet section → Additional settings. On Beeline, it's often unstable.

5. Wi-Fi setup on Xiaomi Mi Router 4A: network name, password and channels

After a successful Internet connection, you have to configure the wireless network. 4A creates two networks:

• 📶 Xiaomi_XXXX (2.4 GHz) for long-range coverage.
• 📶 Xiaomi_XXXX_5G (5 GHz - for high speed.

For a 5 GHz network, it is recommended:

• 📶 Select the channel width: 80 MHz (if there are few other networks nearby).
• 🔢 Manually set the channel (e.g. 36 or 149).

Important: If you have many Wi-Fi connected devices, turn on the option of Lane Split in 2.4 GHz settings. This will reduce delays with high traffic.

💡

For maximum stability, disable Smart Connect (smart switching between 2.4 and 5 GHz) in Wi-Fi settings. It often works incorrectly, leading to connection breaks.

6. Speed check and troubleshooting

After setting up your router, check the Internet speed.

1. Connect your computer to the router via cable (LAN-port).
2. Take a speed test on the websites: 🌐 Speedtest.net 🌐 Yandex.Internetometry

Beeline

If the speed is lower than expected, check:

• 🔌 Connecting the cable (try another one) LAN-router).
• 🔄 Reboot the router and modem (if any).
• 📡 Wi-Fi interference (switch to 5GHz or change channel).
• 📞 Contact Beeline for support – the problem may be on the provider’s side.

Typical problems and solutions:

7. Additional settings for experienced users

If you want to make the most of Xiaomi Mi Router 4A, Consider these options:

Set up parental controls

To limit Internet access for certain devices:

1. Go to the Supplementary → Parental control.
2. Add the device to the MAC-address IP.
3. Set a schedule (for example, lock from 23:00 to 7:00).
4. Save the settings.

7.2 Port forwarding (Port forwarding)

If you need to open ports for a game server, camera, or torrent client:

1. Go to the Supplementary → Port forwarding.
2. Add a rule with an indication: 🔢 External port (e.g. 8080) 🔢 Inner. IP (local-network) 🔢 Inland port (e.g., 80) 📌 Protocol (TCP, UDP either)

Update to firmware

Regular updates improve stability and security:

1. Go to the Supplementary → Firmware update.
2. Click Check for updates.
3. If a new version is available, install it (don’t turn off the router during the process!).

For a diagnosis, go to the condition → Internet and check the status of the connection.