Modern wireless routers from Chinese giant Xiaomi are famous for their minimalist design and high performance, but their full operation requires a competent initial configuration. Many users face difficulties in the first stage, not knowing exactly which address to enter into the address bar or what password to use for authorization in the web interface.
In this article, we will take a closer look at all the steps of logging into Xiaomi’s router management system, look at typical connection issues and how to solve them. Whether you’re using the old Mi Router 3 or the latest Mi Router AX6000, the basic principles of access remain similar, although the interface may differ slightly.
Preparation for setup and physical connection
Before you try to log into a web interface, you need to ensure a stable physical connection between your computer or smartphone and the router. LAN-The cable that usually comes with the delivery kit. WAN (Or the Internet) on the router and the other on your PC's network card. If you plan to configure your device over Wi-Fi, look for a sticker at the bottom of the case with the network name and default password.
Pay attention to the indicators on the front of the device: after power is turned on, the system LED should light up, as well as the indicator of the Internet connection. If the light bulbs flash red or do not light up at all, the problem may be in the power supply or malfunction of the equipment itself. Before starting any manipulations, make sure that the router is fully loaded (the process takes about 1-2 minutes after turning on the socket).
For laptops and desktops, it is important to check the network adapter settings. Auto-receiving mode should be activated on Windows or macOS. IP-address (DHCP). If you have previously registered static addresses, you may not be able to log in to the control panel. VPN-services and proxy servers, as they can redirect traffic bypassing the local network.
⚠️ Note: Do not connect the provider’s cable (internet cable from the entrance) to the port LAN, If you're in the process of initial setup, first connect your PC to any free port. LAN router to get into its interface.
Search IP-Addresses and login to the web interface
The main step to access the configuration is to enter the correct address into the browser address bar. For the vast majority of Xiaomi and Mi WiFi router models, the standard address is 192.168.31.1. Enter this combination of numbers into the address bar (not in the Yandex or Google search bar!) and press the Enter key. In some cases, especially on devices for the global market, the domain name miwifi.com can be used.
If standard addresses don't work, you can manually calculate the correct gateway. On a Windows computer, open the command line by typing cmd into the Start menu and write ipconfig. In the list that opens, find the "Default Gateway" line, the numbers that are listed there are your router's address. On Apple devices, you can find similar information in the Network Settings section.
When you go to the address, you'll see a welcome page. If the router is new, the system will tell you to select the interface language and click the start button. If the device has been in use, you'll need to enter the administrator password. Often users confuse it with the Wi-Fi password, but these are different things. By default, the administrator password can match the wireless network password, if you haven't changed it before.
☑️ Checking before entering
Authorization: default passwords and their change
Security of the home network begins with a strong password to log in to the admin panel. When you first log in, Xiaomi Router OS will urge you to come up with a new administrator password. Write it down in a secure location or use the password manager, because without it you will not be able to make changes to the settings. Some models allow you to use the Mi Account to log in, which makes it easier to manage through the mobile application.
If you forget the password you set earlier, the only way to restore access is to completely reset the settings to the factory. To do this, there is a hidden Reset button on the router's case. It needs to be pinched with a paper clip for 5-10 seconds until the indicator starts flashing orange. After this procedure, the router will return to the factory parameters indicated on the sticker at the bottom.
The table below provides standard login data for popular models. Please note that on devices purchased in China, the interface may be originally in Chinese, in which case it is recommended to use the built-in browser translator or switch the language in the Settings → Status menu, if this option is available immediately.
| Model router | IP-default | Login. | Password default |
|---|---|---|---|
| Mi Router 3 / 3G / 3A | 192.168.31.1 | admin | Not present (set at the first entrance) |
| Mi Router 4 / 4A / 4C | 192.168.31.1 | admin | Not present (set at the first entrance) |
| Mi Router AX1800 / AX3600 | 192.168.31.1 | admin | Wi-Fi password (if not changed) |
| Mi WiFi Nano | 192.168.31.1 | admin | Not present (set at the first entrance) |
What to do if the interface is in Chinese?
Configure WAN and Internet connection parameters
Once you have successfully logged in, you will have a control panel where the central task is to set up your connection to the provider. Depending on your ISP's conditions, you must select the appropriate connection type in the Internet Settings or WAN Settings section. Most often, the DHCP type (Dynamic IP) is used, in which the router automatically receives all the necessary addresses.
If the provider requires authorization, you will need to select the type of PPPoE. In this case, you need to enter the username and password issued by the service provider in the open fields. Be careful when entering: the letter register matters, and unnecessary spaces can lead to a connection error. Some providers tie the subscriber to the MAC-The address may require cloning. MAC-address of the computer from which the Internet was previously logged in.
For users who use static IP-address, manual settings available. IP-address, subnet mask, main gateway and DNS-This data is also provided by the provider in the contract or personal account, and incorrect filling in at least one field will lead to the lack of access to the WAN, even if the LAN will work correctly.
💡
Use public DNS-servers (e.g. Google 8.8.8.8 or Cloudflare 1.1.1.1) in router settings if your provider provides slow-motion DNS. This can speed up the opening of websites.
Configuration of Wi-Fi wireless network
The Wi-Fi Settings section is one of the most visited. Here you can change the network name (SSID) and password to connect devices. We recommend using WPA2-PSK or WPA3 encryption standard for maximum protection. The password should be complex, containing letters of different registers, numbers and special characters to avoid brute force hacking.
Modern Xiaomi routers support two bands: 2.4 GHz and 5 GHz. The 2.4 GHz range provides greater coverage but lower speed and is subject to interference from neighboring networks and household appliances. The 5 GHz range provides high speed and stability, but has a shorter range and penetrates walls worse. You can combine them into one network with a common name (Smart Connect function) or divide them by setting different names.
In advanced settings, you can change the wireless channel. If you have a lot of neighborhood routers in your home, automatic channel selection may not work correctly. By manually choosing a free channel (for example, 1, 6 or 11 for 2.4 GHz), you can significantly improve the signal quality. You can also adjust the transmitter power, which is important for large houses where you need to limit the range or, conversely, strengthen the signal.
Additional features and guest network
Xiaomi routers have rich functionality that goes beyond just sharing the Internet, and one of the most useful features is the Guest Network, which you activate, and you create a separate hotspot for friends or customers, and the main advantage is: Devices on the guest network are isolated from your main LAN, meaning guests won’t be able to access your shared folders, printers, or other devices. NAS-storehouse.
Another important feature is Parental Control, which allows you to restrict access to certain sites, set limits on the Internet usage time for specific devices (such as a child’s tablet), or completely block access at specified hours, an effective tool for monitoring digital consumption in the family without the need to constantly monitor the child.
⚠️ Note: Auto Update may be enabled by default, and although updates often contain security patches, in rare cases, a new version of software may contain bugs. It is recommended to manually check reviews about the firmware version on forums before updating.
💡
Guest networking is not just a convenience, but a necessary level of security that protects your personal files from accidental or malicious access by unauthorized devices.
Typical Access Problems Solving
Even if you follow all the instructions, you can have situations where you can't log in to the settings. IP-If you have another router on your network with the same address (e.g. 192.168.31.1), devices may get confused about where to send requests, in which case you need to temporarily disable the second router or change the router. IP-Address of one of the devices via the command line.
Another common problem is browser cache: Old data can interfere with the correct display of the login page. Try to open the Incognito mode or use another browser. Also, antivirus programs and firewalls sometimes block access to local addresses, considering them suspicious. Try temporarily disabling the protection for verification.
If none of these methods works, and the indicators on the router are acting strangely (flash alternately or burn red), the device's file system may have been damaged. mode_ or contact a service center if the device is warranty. Do not try to disassemble the case if you do not have the appropriate skills.