How to set up Xiaomi AX6000: From basic connectivity to advanced functions

Xiaomi router AX6000 — The company’s flagship router with Wi-Fi 6 support, capable of providing speeds of up to 5952 Mbps and stable coverage for 248 devices at a time, but even the most powerful hardware will not reach its potential without the right setup. In this article, we will analyze not only the basic steps to connect to the Internet, but also hidden functions that the manufacturer does not always advertise: from prioritizing traffic for gamers to creating a guest network with a speed limit.

Feature AX6000 — OpenWRT-based firmware is flexible, allowing you to fine-tune the device, but even without diving into advanced settings, the router can solve 90% of everyday tasks, from distributing the Internet across two bands (2.4 and 5 GHz) to integrating with the Mi Home ecosystem to manage the smart home. The key is to know where to turn on, and let's start with the simplest, and gradually move on to the nuances that make this router stand out among the competitors.

Preparation for setting up: what to do before turning on the router

Before connecting Xiaomi AX6000 To the network, follow a few mandatory steps, which will save time and prevent common errors, such as conflict. IP-Addresses or incorrect identification of connection type.

First, check the configuration: the box should be the router itself, the power supply unit (12V/2A), cable RJ-45 And a brief instruction: If something is missing, don't plug in the device, because the non-original power supplies can damage the hardware. Second, determine the type of Internet connection your ISP uses:

• 🔌 Dynamic IP (DHCP) — The most common option, does not require manual settings.
• 🔐 Static IP — provider provides fixed addresses DNS, lock and mask.
• 📝 PPPoE – login/password authorization (often Rostelecom, Beeline).
• 🌐 L2TP/PPTP — tunneling protocols used by some regional providers.

Check this information in the contract or in the provider’s personal account. If the connection type is unknown, the router will try to determine it automatically, but this does not always work correctly. Also disable the old router (if there was one) and connect the provider’s cable directly to the port. WAN on AX6000 (It's in blue. Use the port. LAN for incoming connection is not possible - this will lead to lack of access to the network.

⚠️ Note: If your provider uses a binding MAC-address (for example, MTS or TTK), specify in advance whether to clone MAC-The address of the old device, otherwise the Internet will not work even with the right settings.

Basic setup via the Mi Wi-Fi mobile application

The easiest way to set up Xiaomi AX6000 — Use the official Mi Wi-Fi app (available for Android and iOS) that automatically identifies the router model and offers a step-by-step instruction. Download it from the App Store or Google Play.

After installation of the annex:

1. Connect the router to the power supply and wait until the indicator on the front panel starts flashing orange (connection waiting mode).
2. Start Mi Wi-Fi and click "Add Device".
3. Select "Router" and scan. QR-code from the sticker on the bottom panel AX6000 (or enter the serial number manually).
4. Connect to the temporary network Xiaomi_XXXX (password is on the same sticker).
5. Follow the instructions of the application: specify the type of Internet connection, come up with a network name (SSID) Password for 2.4 GHz and 5 GHz (you can use the same one).

The annex will also propose:

• 🔄 Update the firmware (it is recommended to do it immediately if a new version is available).
• 🛡️ Enable DDoS protection (activate this item!).
• 📱 Connect router to Xiaomi account for remote management.

Once you have set up, the router will restart and the indicator will turn blue (normal mode). Now you can connect devices to the new network. If the Internet does not appear, check the connection type in the Settings section. → Internet web interface (more on this below).

💡

If the Mi Wi-Fi app doesn’t see the router, try connecting to it via your browser at 192.168.31.1 or reset settings with the Reset button (hold 10 seconds).

Configuring through the web interface: advanced options

The mobile app is convenient for basic customization, but for fine customization, it is better to use the web interface.

1. Connect your computer or smartphone to the router network (via Wi-Fi or LAN cable).
2. Open your browser and go to http://192.168.31.1 (or miwifi.com).
3. Enter the login and password (by default – admin and password, which you specified when setting up).

Interface. AX6000 It's divided into a few tabs. Let's look at the key ones:

One of the most useful sections is Wi-Fi. → Additional, you can do it here:

• 📶 Change the channel width (80 MHz is recommended for 5 GHz for top speed or 40 MHz for stability).
• 🔄 Turn on Roaming Assist (helps devices smoothly switch between 2.4 and 5 GHz).
• 🛡️ Activate Protection Against Counterfeiting MAC (prevents the connection of other devices).

Shut down. WPS safety-setting|

Set the width of the channel 5 GHz at 80 MHz|

Turn on Roaming Assist for seamless switching|

Change. DNS Cloudflare (1.1.1.1) or Google (8.8.8.8)|

Hide. SSID, If you need additional protection-->

For experienced users, the section Additional → System tools where possible:

• 🔧 Turn on SSH-Access for manual adjustment through the console.
• 📦 Update the firmware manually (if the automatic update does not work).
• 🔄 Reset the settings to factory (Reset).

⚠️ Note: If you have turned on the guest network, make sure that the local network is disabled (Isolate guest devices) in its settings, otherwise users connected to the guest network will be able to see your main devices (printers, NAS etc.).

Wi-Fi 6 Optimization: How to Get the Most Speed

Xiaomi AX6000 Supports the Wi-Fi standard 6 (802.11ax), In theory, it is possible to achieve speeds up to 5952 Mbps: However, you need to set up several settings correctly. First, make sure your devices (smartphone, laptop) also support Wi-Fi. 6. For example, the iPhone 11 And newer, Samsung Galaxy S10+ and newer, as well as laptops with Intel chips AX200/AX210.

Second, check the following settings in the Wi-Fi section. → Additionally:

• 📡 Mode of operation: select 802.11ax (If you have devices without Wi-Fi support 6, set up 802.11ax/ac).
• 🔄 5GHz channel width: set 80MHz (if few other networks are nearby) or 160MHz (if your devices support it).
• 🔒 Protection: use WPA3-Personal (if all devices support it; or WPA2/WPA3 (compatiblely).
• 📶 Transfer power: set to High (if the router is in the center of the apartment) or Medium (if there are many other networks nearby).

Critical nuance: if your smartphone or laptop does not connect to the network after changing the mode on the Internet 802.11ax, Return the setting to mixed mode (802.11ax/ac/n). Some devices (such as old Android tablets) 8) They do not support clean Wi-Fi. 6.

To check the real speed, use Speedtest or Fast.com. Test the speed at a distance of 1-2 meters from the router (no obstacles) and compare it with the indicators when connecting via cable. If the speed on Wi-Fi is lower by 30-40% is normal. If the difference is greater than 50%, try:

• 🔄 Switch to another channel manually (in the Wi-Fi section) → Main settings).
• 📡 Reduce the channel width to 40 MHz (if 80 MHz is used).
• 🛡️ Shut down. MU-MIMO (If the devices do not support this technology).

💡

For maximum speed over Wi-Fi 6 It is necessary that both the router and the client device support this standard, otherwise the connection will run on an older protocol (802.11ac/n).

Security setting: protection from hackers and neighbors

By default, Xiaomi AX6000 It has basic security settings, but they're not enough to protect against targeted attacks or "curious" neighbors:

1. Change the Administrator Password: Go to System Tools → Manage the device and set a complex password (at least 12 characters with numbers and special signs).
2. Disable Remote Control: In the same section, deactivate the Remote Access option if you don’t plan to control the router from the outside.
3. Configure Firewall: In the section Additional → Security on: 🛡️ Protection against DDoS attacks. 🔒 Filtration MAC-Addresses (allow connection only to known devices). 🚫 Blocking ping from the internet (hiding the router from scanners).

For additional protection, it is recommended:

• 🔄 Update the firmware to the latest version (in the System Tools section) → Firmware update).
• 📡 Shut down. WPS (A vulnerable protocol that can be hacked in a matter of hours).
• 🌐 Use alternatives DNS: In the Internet section → Settings DNS Specify: 1.1.1.1 (Cloudflare) 8.8.8.8 (Google) DNS) This will speed up the loading of sites and protect against phishing attacks.

If you suspect that someone has connected to your network, check the list of devices in the Devices section. Unknown gadgets can be blocked by the Internet. MAC-It is also useful to enable notifications for new connections in the Mi Wi-Fi mobile app.

Integration with smart home and Mi Home

Xiaomi AX6000 It's fully compatible with the Mi Home ecosystem, allowing you to manage your router through voice assistants (Alice, Google Assistant) or automate scripts, such as setting up a schedule to shut down your kids' Internet or turning on your guest network when you activate the Party mode".

To connect the router to Mi Home:

1. Install the Mi Home app on your smartphone.
2. Sign in with the same Xiaomi account that is linked to the router.
3. Press "Add device" → "Router" and select" AX6000 list.
4. Confirm the connection (the router must be on the network).

After the connection, the following functions will be available:

• 📱 Remote management: Wi-Fi on/off, router reboot.
• 🕒 Schedule: Automatic Internet shutdown at night.
• 👨‍👩‍👧‍👦 Parental Controls: Restricting access to certain websites for children.
• 🔄 Automation: for example, turning on the guest network when activating the “Guests” mode in a smart home.

To set up parental control:

1. Open Mi Home → select router → "Parental control".
2. Add a device (for example, a child’s smartphone) to MAC-address.
3. Set limits: ⏰ Internet usage time (for example, from 20:00 to 8:00 access is blocked). 🌐 Blocking sites by category (social networks, games, adult content).

⚠️ Note: If you use a guest network for smart home devices (such as cameras or light bulbs), make sure that the guest network settings allow access to the LAN. Otherwise, the devices will not be able to communicate with the Mi Home hub.

Port port transfers and DMZ for game consoles and servers

If you are using Xiaomi AX6000 for game consoles (PlayStation, Xbox), home server or IP-cameras, port forwarding or settings may be required DMZ. This will allow external devices to connect to your local network.

For port port transfer:

1. Go to the Supplementary → Port forwarding.
2. Click Add Rule and fill in the fields: Service name: For example, PlayStation Protocol: TCP, UDP or TCP/UDP. External port: port that will be open to access from the internet (e.g, 3074 for PS4). Internal IP: local IP-address of the device (e.g, 192.168.31.100). Internal port: port on the device (usually the same as the external port).

Save the rule and restart the router.

Game consoles often require the following ports:

If the port port transfer does not help (for example, NAT Type 3 on PlayStation, try to set up DMZ:

1. Go to the Supplementary → DMZ.
2. Enable the option and specify local IP-Device address (e.g. 192.168.31.100 for console).
3. Save the settings and restart the router.

If nothing helps, reset the router with the Reset button and set it up again.