Changing the name of your wireless network is not just a matter of aesthetics, but also an important step in organizing your home digital space. When you purchase a new Xiaomi router, it defaults to a standard name consisting of a device model and a random set of characters. This designation is often found on the list of available networks in neighbors, which can cause confusion when connecting new gadgets. In addition, a unique name allows you to immediately know what network belongs to your home or office, especially in apartment buildings with high density Wi-Fi signals.
The SSID (Service Set Identifier) renaming process is the basic setup available to owners of any Chinese brand routers. You can do this procedure in two main ways: through a browser on a computer or smartphone, logging into the control panel, or using an official mobile application. Both methods require minimal technical knowledge, but have their own nuances, which we will discuss in detail. Proper network name setting also increases security by hiding the model of your equipment from prying eyes.
Before making any changes, make sure your device is connected to the router by cable or Wi-Fi. Any changes to your wireless network settings will result in a short-term connection break, so it’s important to have access to the control device. In this article, we’ll look at all the stages of setting up, possible problems, and ways to solve them so you can quickly personalize your network.
Preparing for changing the router settings
Before you enter the control interface, you need to physically verify the stability of the connection. Connect your computer or smartphone to the router. If you use a laptop or PC, you prefer to use it. LAN-cable, as it provides the most reliable connection when you make changes to the system files of the device. For mobile devices, it is enough to be connected to the current Wi-Fi network, even if it has a standard name.
You'll need to know. IP-The gateway address, which most often looks like 192.168.31.1 or 192.168.1.1 for Xiaomi devices, is usually printed on a sticker located at the bottom of the router housing, and the administrator password is also listed there, unless you changed it when you first set up. Without this data, access to the control panel will be impossible.
It should also be a new name for your network, which should be unique within your visibility zone, so that devices do not automatically try to connect to other networks with similar names, and avoid using special characters that may not be displayed correctly on older devices.
⚠️ Warning: Making changes to the router settings will temporarily shut down all wireless devices. Make sure you don't interrupt the configuration update process so as not to damage the router's software.
If you forget the password from the admin panel, you may have to reset to factory settings.This is an extreme measure that will return the router to its original state, including the standard network name. So always write new passwords to a secure location immediately after they are created.
Entering the control panel via the web interface
The most versatile way to change the router name is to use a built-in web interface, which works on any device that has a browser: Windows, macOS, Linux, Android or iOS. Open any modern browser and enter in the address bar IP-your router address, such as 192.168.31.1. Press Enter and the system will request authorization.
Enter the administrator password. If you set up the router for the first time and set a password, use it. In some cases, if the password was not set, the system may ask you to create it the first time you log in. Xiaomi interface usually meets the user with a concise design with a minimum number of elements on the home screen.
What to do if the page is not loaded?
If the browser says “Can’t access the site”, check if the entered correctly IP-Make sure the device is not on VPN Or proxy, which can redirect traffic bypassing the local network. Also try opening the page in incognato mode.> After successful authorization, you will be taken to the main status page, which displays the current state of the network. OS), This section can be called "Wi-Fi settings," "Wireless," or "Wireless Network." Often the icon looks like divergent waves. Inside the section, you'll see the fields for the network name (SSID) And the password. SSID (Service Set Identifier is responsible for the visible name of your network. Change the text in this field to the desired name. The system may suggest splitting the settings for the 2.4 GHz and 5 GHz bands. Modern Xiaomi routers support Smart Connect technology, which combines two frequency bands under one name. If this feature is active, you change the name for both bands at once. If the function is disabled, you will have to specify the names separately for the two bands. 2.4 GHz 5 GHz so that devices can distinguish them. ☑️ Check before saving New name for no typos Make sure password is difficult Remember that connection will be interrupted Ready to reconnect devices Completed: 0 / 4 After entering a new name, be sure to click the "Save" or "Apply" button" (Save/Apply). The router will restart the wireless module, and 10-20 For users of the Xiaomi ecosystem, the most convenient way to manage is the Mi Home application (or Mi Wi-Fi in some regions). This method allows you to change the name of the router directly from your smartphone, being anywhere in the apartment, without having to look for a sticker with the device. IP-The app automatically detects connected Xiaomi devices on your network. Run the app on your smartphone and make sure you are logged in to your Mi Account. On the home screen, find your router icon. It's usually displayed in the device list or in the Device tab. Click on the icon to go to the router control menu. From the router menu, select "Wi-Fi settings" or "Settings." Here you'll see the current network name. Tap the title field, delete old text and enter a new one. the app interface often offers a friendlier user experience with hints and real-time validation of entered data. 📱 Open the Mi Home app and select your router from the list. 🔧 Go to the section of settings of wireless network (Wi-Fi Settings). ✏️ In the field "Name of the net" (SSID) Enter the new desired name. 💾 Press "Save" or "OK" The app will automatically send a command to the router. Unlike the web interface, Mi Home can alert you that the phone will disconnect from the network after changing the name, and prompt you to automatically reconnect to the new network with the updated settings. It’s a handy feature that eliminates manual network search in your phone’s settings, and it’s important to note that the app interface may vary depending on the region you choose when you register your account. If you don’t find the right items, try switching the region in the profile settings to China or Russia/CIS, as servers may have different versions of the interface. Differences in setting for ranges 2.4 GHz 5 Modern Xiaomi routers are dual-band, supporting standards 802.11n (2.4 GHz and 802.11ac/ax (5 GHz: When you change the name of the network, it's important to understand how your router broadcasts these signals. By default, many models use the networking function to create a single access point. If the Dual-Band Integration function is enabled, you'll have one network name for all devices. The router decides which band to connect to a particular gadget based on the strength of the signal and the standards it supports, and in this case, when you change the name, you change it for both frequencies at once. However, if you decide to disable bandwidth integration, you'll have to ask two different names, "MyHome_2.4G" and "MyHome_5G". This can be useful for older devices that do not work well with the 5 GHz band, or for prioritizing traffic so that powerful devices (TV, consoles) operate at a faster frequency. 2.4 GHz 5 GHz Connected network Signal range High, breaks through walls Medium, worse passes obstacles Adaptive Speed Lower, is subject to interference Device Depending on the device Name Number 1 (if divided) 1 (if divided) Common name All devices Only Modern gadgets All devices Separate and Names Make sure that you are not getting confused with the new network, you will have to get lost to the new name. For game consoles and 4K-It is recommended to manually connect to a 5GHz network if you have split names to ensure maximum bandwidth for streaming and online gaming. Some users use Xiaomi routers in either Repeater or Access Point mode, and the logic of changing the name may differ in these modes. If the router is a repeater, it often copies the name of the main network, extending its range, in which case the separate name for the repeater may not be specified or hidden. In access point mode, when the router receives the Internet via cable from the provider and distributes it over Wi-Fi, the procedure for changing the name is completely similar to the one described above for the main router. You enter the interface, find the wireless network settings and change the name. SSID. So, after the change of mode, be sure to check the network name. If you use the Mesh system (multiple Xiaomi routers combined into a single network), the change of name on the main router will automatically apply to all satellites. Separately change the name on each node of the Mesh-system is not necessary and often impossible, as they work as a single organism. ⚠️ Note: When using a router in Repeater mode from another brand, the network name may be inherited from the main router. Make sure you change the settings on the device that is the source of the signal. After switching to access point mode and changing the name, make sure that the distribution of the Internet is correct and the speed is not limited to the settings of the new mode. Although the procedure is simple, users may encounter difficulties, and one of the most common problems is that you can't save your settings, which can be because the new name uses forbidden characters. Try to use only Latin letters, numbers and a hyphen. Another common situation is that the device does not see a new network after renaming, in which case you need to forget the old network (Forget Network) in the list of saved Wi-Fi connections on your smartphone or laptop. Then search again and enter the password for the network with a new name. 🚫 Saving error: Check the length of the name (maximum 32 characters) and the absence of Cyrillic. 📡 Network not found: Make sure the radio is on and not worth the hidden mode (Hidden) SSID). 🔒 Connection problems: Delete the old network profile on the client device. Sometimes the browser caches the old settings page. If you see the old name in the interface even after saving, try clearing the browser cache or logging into the control panel via incognito mode. If nothing helps and the router is unstable after changing settings, reset to factory settings. To do this, press and hold the Reset button on the router's body for a period of time. 5-10 seconds before the indicator flashes (FAQ) Can you use Russian letters in the name of the Xiaomi network? Technically, the Wi-Fi standard allows you to use the same name? UTF-8, However, many older gadgets, printers and smart appliances can display names like a set of cracks or not see the network at all. Will the Wi-Fi password be reset when you change the name? No, the password (security key) stays the same unless you specifically changed it. Only the network ID changes (SSID). However, since it will look like a new network for devices, you will have to re-enter the password on all connected gadgets. How to return all settings if I am confused? There is a hole on the case of any Xiaomi router that says Reset. Press it with a paper clip and hold it for about 10 seconds until the indicator flashes yellow or orange. The router reboots with factory settings, and you can reconfigure it as a new device. Does the length of the network name affect Internet speed? No, the length of the name (SSID) It doesn't affect the speed of data transfer or the stability of the connection. It's just a marker for the detection of the network by devices. However, too long names can be uncomfortable to display on the screens of some smartphones. Do I need to reflash the router to change the name? No, flashing is not required. Name change is a standard feature available in the standard interface of any Xiaomi router. Flashing is only necessary to expand functionality or correct critical software errors, but not for basic settings.