If you've ever seen Xiaomi router setup, you've probably noticed a mysterious word called "silence" in your router menu or instructions, which appears next to your wireless network settings, but what exactly is behind the term isn't clear to everyone. What's particularly confusing is that various sources might call "mellowship" technology, mode of operation, and even Xiaomi's proprietary protocol.
In fact, Proximity Wireless Network is a simplified implementation of Mesh, designed specifically for the Xiaomi ecosystem, which allows multiple routers (or access points) to connect to a single network without complex settings, providing smooth roaming between devices and extended Wi-Fi coverage. But unlike classic Mesh systems, the millet has its nuances in terms of both capabilities and limitations.
In this article, we will analyze how “silent” differs from Mesh, how to configure it on Xiaomi Mi Router routers. 4A/4C/AX3600, What are the pros and cons of this technology, and in what cases it should (or should not) be used, and also answer the main question: can you use the millet to replace a full-fledged Mesh network and save on the purchase of expensive equipment.
What is “sweet” in Xiaomi routers: just about the complex
The term “proso” (sometimes spelled “proso” or “pro-so”) is an internal name for the technology Xiaomi uses to organize seamless Wi-Fi between its routers, essentially a simplified analogue of the Mesh network, but with a number of features:
First, the millet only works between Xiaomi devices (routers, repeaters, access points). You can't connect another brand's router to such a network, the system just won't see it. Second, unlike classic Mesh systems (like Google Nest Wi-Fi or TP-Link Deco), there's no dedicated channel for communication between nodes, which means that traffic between routers goes in the same range as user devices, which can reduce speed with a large number of connected gadgets.
Technically, the “probe” is based on the standard. 802.11k/v/r, But Xiaomi has added algorithms that make it easier to set up, such as automatic channel allocation and load balancing between nodes. The user receives a single network with a single name (SSID) and a password that can be navigated without losing the connection.
Key differences between “messel” and the classic Mesh-network
To see if the technology is suitable for you, compare it with full-fledged Mesh-systems:
| Characteristics | «Proso (Xiaomi) | Classic Mesh Network |
|---------------------------|-----------------------------------|------------------------------------|
| Compatibility | Only Xiaomi devices | Any compatible devices |
| Dedicated channel | No (using user-generated) | Often eat (5 GHz or 60 GHz) |
| Speed between knots | Do 50% maximum | Do 80-90% (channel-driven) |
| Setting up | Automatic, via Mi Home | Often requires manual configuration. |
| Cost | Free (built into routers) | Expensive (requires purchase of Mesh nodes) |
Conclusion: “melting” is a budget alternative to Mesh, which is suitable for small apartments or houses with a small size. 2-3 If you want maximum speed and stability in a large house with many devices, it is better to consider a full-fledged Mesh system.
Which Xiaomi routers support “sweet”
Not all Xiaomi routers are able to work in the “sills” mode. Here is the full list of supported models (2026):
- 📡 Mi Router 4A Gigabit Edition (R4A)
- 📡 Mi Router 4C (R4C)
- 📡 Mi Router AX3600 (RA67)
- 📡 Mi Router AX6000 (RA75)
- 📡 Mi Router AX9000 (RA86)
- 📡 Xiaomi AIoT Router AX3600 (Special version for smart home)
Note that even if your router is on the list, be sure to update your firmware to the latest version. In older versions, the millet function may not work stable or at all. You can check the relevance of the firmware in the Settings menu. → Update of the PO.
Important: Redmi routers (e.g. Redmi Router) AX5 or AX6) They don't support the sieve, they use a different protocol to network, and you can't connect the sieve to the sieve, you can't connect the Xiaomi Mi Wi-Fi Repeater 2 or Mi Wi-Fi Amplifier Pro, despite their ecosystem membership.
💡
If you have two Xiaomi routers, but one of them does not support “sweet”, you can try to configure them in mode. WDS (However, in this case there will be no seamless roaming, and when moving between points, the connection will break.
How to set up “sweet” on Xiaomi routers: step-by-step instructions
The setup of the millet network takes no more than 10 minutes if you already have two (or more) compatible routers.
Step 1: Preparing routers
Before starting, make sure that:
- ✅ Both routers are powered on and connected to power.
- ✅ The main router (the one that is connected to the Internet) has the current firmware.
- ✅ Secondary router reset to factory settings (reset button for 10 seconds).
- ✅ Both devices are in the same room (they can be separated later).
Step 2: Connect with Mi Home
1. Open the Mi Home app on your smartphone and log in.
2. Go to the Devices section → Add the device (+) → Router.
3. Select the model of your secondary router (the one that will expand the network).
4. Follow the instructions on the screen. When the app asks you to select a mode, select Proximity Network Mode.
5. Wait for routers to sync (this may take time) 2-5 minute).
Step 3: Set up the network
After successful connection:
- 🔄 Both routers will use the same router. SSID Password (sets are taken from the main router).
- 📶 The secondary router will automatically select the optimal channel to communicate with the main router.
- 🔄 In the menu of the main router will appear section “Millet Network”, where you can see the list of connected nodes.
Both routers are displayed in Mi Home|SSID and the password matches|Internet speed has not dropped by more than 30%|Devices automatically switch between points-->
If you've set up a lot of Internet speed, try this:
⚠️ Note: In millet mode, Xiaomi routers default to using the same channel to communicate with each other and to connect devices. This can cause interference. To correct this, go to the settings of the main router (Wi-Fi). → Setting millet) and manually select different channels for 2.4 GHz and 5 GHz.
Pros and cons of technology “sweet”: whether to use
Like any technology, millet has its strengths and weaknesses, and let's go through them in detail so you can make an informed decision.
✅ Benefits of “sweet»
- 💰 Free: no need to buy additional equipment – just two routers Xiaomi.
- ⚡ Simple setup: everything is done through Mi Home without manual input IP-address.
- 🏠 Unified network: no need to reconnect when moving between rooms.
- 🔄 Automatic balancing: routers choose the optimal channel and distribute the load.
❌ The disadvantages of “sweet»
- 🐢 Speed reduction: Due to the lack of a dedicated channel, the real speed between nodes may fall by a few times. 30-50%.
- 🚫 Limited compatibility: only Xiaomi routers from the supported list work.
- 📶 Roaming problems: In some cases, devices (especially Apple) can stick to a single access point.
- 🔧 Limited settings: you can not manually prioritize nodes or configure QOS for millet.
Critical: If you have gigabit Internet, you're not likely to be able to use it to the fullest in millet mode, because of the limitations of wireless backhol between routers. The maximum real speed between nodes usually doesn't exceed the maximum speed. 300-400 Mbps (even on the AX3600).
💡
“Simple” is ideal for apartments up to 100 m2 with Internet up to 300 Mbps. For large houses or speeds above 500 Mbps, it is better to consider a full-fledged Mesh system or wired connection of routers.
Frequent problems with “sweet” and how to solve them
Even when you set it up properly, users sometimes encounter common errors, and here are the most common ones and how to fix them:
🔴 Problem: Routers do not see each other in the mode of “message»
Possible causes:
- 📱 Outdated firmware (update both routers).
- 🔌 Too much distance between devices (maximum 10 meters for initial setup).
- 🔄 Wi-Fi settings have mode enabled 11b/g/n instead 11a/n/ac/ax (check on the main router).
Solution: Reset both routers to factory settings and repeat the connection procedure.
🔴 Problem: Devices do not switch between access points
This is one of the most common complaints.
- 📱 The client device (smartphone, laptop) is “tied” to one point and does not want to switch.
- 📶 The signal from the main router is too strong and “clogs” the secondary router.
- ⚙️ In the settings "prosote" turned off roaming (check in Settings) → Grid of millet → roaming).
Decision:
- Reduce the transmission power on the main router (in the Wi-Fi settings).
- Manually turn off Wi-Fi on the device and connect again.
- Update the firmware of routers (in new versions, the roaming algorithm has been improved).
Why does the iPhone work poorly with “silence”?
🔴 Problem: After setting up the “sweet” disappears the Internet
Reasons:
- 🔌 The main router does not receive IP-address from the provider (check the cable and settings) WAN).
- 🔄 Conflict IP-Addresses between routers (secondary router must be in mode) DHCP-client).
- 📡 The provider blocks multiple connections from one MAC-addresses (solved by cloning) MAC).
Solution: Reboot both routers and check settings WAN If the problem persists, try turning off the millet and set the routers in mode. WDS.
Alternatives to “sweet”: what is best for a large network
If the “sweet” is not suitable for speed or stability, consider alternative ways to organize a seamless network:
1. A full-fledged Mesh network
Examples: Xiaomi Mesh System AX3000, TP-Link Deco X60, ASUS ZenWiFi.
- ✅ Dedicated channel for communication between nodes.
- ✅ Support for roaming at the standard level 802.11k/v/r.
- ❌ More expensive than "sweet" (from 10 000) ₽ 2-knot).
2. Wired connection of routers (LAN-WAN)
If you can lay a cable between routers, it is the best option for speed and stability.
- ✅ Maximum speed (gigabit traffic between nodes).
- ✅ No loss of wireless transmission.
- ❌ Requires cable laying.
3. Mode WDS (wireless)
Suitable for older routers that do not support "silence".
- ✅ It works with most models.
- ❌ No seamless roaming (you will have to reconnect manually).
- ❌ Speed drops 2 times due to relaying traffic.
Tip: If you already have Xiaomi routers, but the “millet” is unstable, try wired connection – this will give you better speed at no additional cost.