Broken glass on Xiaomi Redmi Note 7 is one of the most common problems for owners of this smartphone. Even a minor crack can eventually lead to a complete failure of the display, and glass fragments to injuries to the fingers. But how much it costs to fix this problem in 2026? Prices vary from 1,500 to 6000 rubles, and the difference depends not only on the type of spare part, the level of service center and even the time of year (in the pre-New Year months, repairs often increase).
In this article, we will analyze the current prices for glass replacement, compare original and non-original parts, tell you where to repair it in the official Xiaomi service or from private craftsmen, and give a checklist for how to check the quality of work after repair. Importantly, in 90% of cases, replacing only glass without a touch layer is cheaper, but such repair is not always possible – it all depends on the display model and the nature of the damage.
How much does it cost to replace glass on Redmi Note 7: a price comparison in 2026
The cost of repairs depends on three key factors: the type of spare part, the complexity of the work and the status of the service center, and the current prices for June 2026 (for Moscow and the regions adjusted for logistics).
| Type of spare part | Cost (₽) | Where do they set up? | Guarantee |
|---|---|---|---|
| Original glass (without sensor) | 3 500 — 5 000 | Official services, large networks | 6–12 months |
| High quality analogue (e.g. Tianma or BOE) | 2 200 — 3 500 | Private workshops, some networks | 3–6 months |
| Budgetary analogue (Chinese no-name) | 1 500 — 2 500 | Small workshops, markets | 1–3 months or not present |
| Complete replacement of the display module (glass + sensor + matrix) | 5 000 — 8 000 | Any services | 6-24 months |
Prices can be 10-20% lower in the regions, but it is important to consider the risks: small towns often use cheap parts under the guise of original ones. For example, in Yekaterinburg or Novosibirsk, glass replacement costs an average of 2,800-4,500 times. ₽, a in Krasnodar or Rostov-on-Don – 2,500–4,000 ₽.
Previous Previous post: What to Choose for Redmi Note 7
The main issue when repairing is to put original glass or save on analogue. Xiaomi produces original parts for the Redmi Note 7 in partnership with Samsung Display or BOE, but their cost is often overstated due to logistics and service markups. Analogues are cheaper, but not all of them are equally quality.
- 🔹 The original glass: perfect color reproduction, full sensor compatibility, long service life, minus price and shortage (sometimes you have to wait 1-2 weeks for delivery).
- 🔹 Premium analogues (Tianma, BOE OEM): They are almost equal to the original, but can have a noticeable yellowish hue in bright light.
- 🔹 Budget analogues: low price, but the risk of adhesive detachment after 3-6 months, the worst sensitivity of the sensor, possible "dead zones".
Tip: If you plan to use a smartphone for another 1-2 years, you should pay more for the original or premium analogue, and for a temporary solution (for example, before selling a phone), a budget option will also suit.
💡
Before repairing, ask the wizard to show the spare part in the package. The original glass for the Redmi Note 7 has a holographic sticker with the serial number and the Xiaomi logo on the protective film.
Where to replace glass: official service vs private workshops
Xiaomi's official service centers guarantee quality, but they cost more, private workshops save on parts and rent, so they can offer a price lower by 30-50%, but there are pitfalls.
- ✅ Pros of official service:
- ❌ Cons:
Private workshops are winning in price and speed, but it is important to check here:
- Reviews on Yandex.Maps or 2GIS (especially negative ones – how the wizard reacts to them).
- A stamped and signed warranty card.
- The ability to test the sensor after repair (for example, using the Touch Screen Test application).
How to check the workshop before repair?
Step-by-step: how to replace glass
If you're going to have your phone repaired, it's helpful to know what the process should look like, and it can help you control the wizard and avoid cheating, and on average, it takes 1.5 to 3 hours to change the glass, but in complex cases, such as when a plume is damaged, it can take you all day.
Checking the phone for additional malfunctions (diagnostics)| Disassembly of the case using a professional hair dryer (temperature 80-100 ° C)|Secure separation of broken glass with special suction cups and mediators |Cleaning the display from glue and dust residues |Deposition of a new adhesive layer (preferably LOCA or OCA) |Installation of new glass and lamination under the press |Sensing and check for “yel spots” |Phone assembly and final check---->
An important caveat: if a master suggests replacing the glass in 30-40 minutes, it is a reason to doubt the quality.
- 🔧 Use cheap glue that will peel off in a couple of months.
- 🔧 Lamination (glass can "play" when pressed).
- 🔧 Savings on cleaning (dust under the screen will be visible in bright light).
💡
The most reliable way to fix glass is with UV-curing LOCA glue, which is more expensive, but keeps the glass as original and doesn't turn yellow over time.
Frequent problems after glass replacement and how to avoid them
Even after repairs, good service can get in trouble, and here are the most common ways to prevent it:
⚠️ Warning: If after the glass was replaced, the sensor becomes less responsive to touching the edges of the screen, this is a sign of a poor quality spare part or improper installation!
- 📱 "Yellow spots under glass: they appear because of cheap glue or poor cleaning. To avoid this, ask the master what glue he uses (optimal — LOCA or OCA).
- 📱 Glass flaking at the edges: bad sealing, see if the workshop has a laminator, without it, the glue will lie unevenly.
- 📱 Poor sensor sensitivity: often with budget windows. Test the sensor with the Display Tester app before repair.
- 📱 Extraneous pressed noise: glass is loosely glued or glue is used too thick!
If the problem appeared in the first days after the repair, contact the service with a claim. According to the law "On consumer protection", you have the right to free elimination of defects during the warranty period.
Can I replace the glass with the Redmi Note 7 on my own?
Theoretically, yes, but in practice, it's risky. AMOLED-It's a display that's easy to damage when you disassemble, and you also need a good replacement:
- 🔧 Professional dryer with temperature control (a conventional construction is not suitable!).
- 🔧 A set of mediators and suckers for careful removal of glass.
- 🔧 Clay. LOCA or OCA and a UV-cure lamp.
- 🔧 Laminator (or heavy book for pressing, but this is the worst option).
The cost of tools and spare parts for one-time repairs often exceeds the cost of work in the service, but if you do decide, here is a brief instruction:
- Turn off your phone and remove the back cover (it's on clips, but be careful with plumes!).
- Heat the screen with a hair dryer to 80-90°C to soften the glue.
- Carefully tuck the glass with a mediator, starting at the corner.
- Remove the glue residues from the display with alcohol or a special solvent.
- Apply new glue, install glass, and place under a press (or heavy book) for 1-2 hours.
⚠️ Warning: If you replace yourself, you lose your phone warranty (if it's still valid) and risk damaging your matrix. In 60 percent of cases, "self-activity" leads to additional repair costs!
💡
If you want to try replacing the glass yourself, practice first on a non-working phone or watch detailed videos on YouTube (for example, the Repair Universe channel).