Screen Xiaomi Redmi Note 8 Pro: specifications, pros and cons of the display

Xiaomi Redmi Note 8 Pro, released in 2019, is still one of the most talked about smartphones in the budget segment. G90T If you have a 64MP camera, you have lots of reviews, and you often have a screen that's in the shadows, because it's the display that determines how comfortable you're going to be with your phone, from watching videos to playing games to reading text.

In this article, we’ll take a closer look at what screen the Redmi Note 8 Pro is, from the type of matrix and resolution to hidden chips and typical issues. You’ll learn why it’s still considered one of the best in its class, despite the age of the model, and how it differs from the screens of modern smartphones. And if you’re planning to buy a used device, we’ll give you a hint of what to look for when checking the screen.

Technical characteristics of the screen Redmi Note 8 Pro: full analysis

Xiaomi Redmi Note 8 Pro screen is built on the basis of IPS-It's a 6.53-inch matrix, and it's a classic budget smartphone solution of the time, but with a few important features:

• 📏 Permission: 2340 × 1080 pixels (Full) HD+), point-density — 395 For ppi. 2019 This was the top resolution in the segment before 20 000 ruble.
• 🔄 Update frequency: standard 60 Hz – without support for high frequencies, as in modern gaming smartphones.
• 🎨 Color scheme: 96 coating% NTSC (according to the manufacturer), which provides a juicy and saturated colors.
• 🔦 Brightness: up to 500 nits (maximum), with support for automatic adjustment and Reading Mode 2.0 mode for vision protection.
• 🛡️ Protection: Gorilla Glass 5 (on both sides of the case), but without premium-level oleophobic coating.

Interesting fact: despite the IPS-The Redmi Note 8 Pro has a contrast ratio of 1500:1, which is higher than many. AMOLED-This result is achieved due to high-quality backlighting with local dimming (although not at the level of true-black, like the one in the market). OLED).

Compare the key screen parameters with competitors of the time:

As can be seen from the table, Redmi Note 8 Pro wins in brightness from most competitors, and in color reproduction is not inferior even to the other. AMOLED-screens due to high-quality calibration of factory profiles.

IPS vs AMOLED: Why Xiaomi chose this matrix?

Many users still ask why Xiaomi did not equip the Redmi Note 8 Pro AMOLED-How did competitors like Samsung or Oppo do it? The answer lies in several key factors:

1. Price. 2019 AMOLED-The displays cost 30-50% more IPS Xiaomi has been betting on maximum performance for minimal money, so it saved on the type of matrix, but invested in its quality.
2. Durability. IPS-screens are not subject to burn-in (pixel burnout), which is important for budget devices that often use several years.
3. Color rendering. AMOLED At that time, they often suffered from oversaturated flowers from the box". IPS It also gives a more natural picture, which is important for photographers and designers.
4. Energy consumption, at the same brightness IPS and AMOLED The Redmi Note 8 Pro with its 4,500 mAh battery pack was uncritical.

Of course. IPS There are also disadvantages. For example, the viewing angles are worse than the ones that are AMOLED: When you look at it from a sharp angle, it's "washed out." IPS It's not that deep, and it's visible in the dark scenes of movies or games, but for most users, these nuances are not critical.

Screen modes and hidden settings: how to improve the picture

Redmi Note 8 Pro offers several preset display modes that you can customize to your tasks. To get into the screen settings menu, go to: Settings → Display. → Color scheme.

Options available:

• 🌈 Standard: balance between saturation and naturalness, suitable for most tasks.
• 🎨 Saturated: reinforced colors, suitable for gaming and watching videos (but can distort the shades in the photo).
• ☀️ Soft: warm tones, reduces eye strain with prolonged use.
• 📱 Automatic: adapts to lighting (works with ambient light sensor).

In addition to color profiles, the smartphone has other useful features:

Set the color temperature on "Warm" in the evening|Activate Reading Mode 2.0 for Reading|Turn off automatic brightness if it is not working smoothly.|Check the Double Tap to Wake settings (double tap to wake up)

-->

One of the most useful features is the Reading Mode 2.0 Reading Mode, which not only makes the screen monochrome, but adjusts to the lighting, imitating paper. → Display. → Reading mode.

⚠️ Warning: If the screen becomes too dark after activating Reading Mode, check the brightness settings – the mode resets it up to 50.

Game Turbo is a useful feature for gamers, which optimizes performance and blocks notifications during play. It also allows you to block random touches at the edges of the screen (relevant to dynamic shooters). → Special facilities → Game Turbo.

Typical Redmi Note 8 Pro screen problems and how to fix them

Despite its reliability, the Redmi Note 8 Pro screen may face several typical problems over time, and let’s look at the most common and ways to fix them.

1. Yellow spots or uneven illumination

It's a classic backlight bleed, a defect. IPS-And the matrices, when the backlight shines out on the edges of the screen, are especially noticeable on a black background:

• 🔧 Incorrect assembly (poorly fixed matrix).
• 💥 Phone hit or fall.
• ⏳ Natural wear after 2-3 years of use.

Solutions: Settings → Display. → Automatic brightness → Disconnect (sometimes the system mistakenly increases the brightness of the backlight).

If the defect is severe, only a screen replacement will help.

2.The screen does not respond to touch

This is most often related to:

• 📱 Software failure (reset or flashing required).
• 🔌 Failure of the plume of the touch screen (after falling).
• 💧 Moisture under the screen.

The first thing to do: Settings → The phone. → Resetting settings (without deleting data).

If it doesn’t work, check your phone for physical damage.

⚠️ Note: If the screen has stopped responding after the update MIUI, Try to roll back to the previous firmware version via Fastboot. 4PDA The Redmi Note 8 Pro Theme.

3. Blinking or ripples on screen

This may be caused by:

• ⚡ Unstable voltage (problems with battery or charging).
• 🔄 Incorrect refresh rate (although this model only has 60 Hz).
• 📡 Interference from other devices (rarely, but sometimes).

Decisions:

1. Try to turn on Safe Mode (hold the power button) → "Safe mode. If the flicker is gone, the third-party app is to blame.
2. Turn off Automatic Brightness and set the value manually.
3. Check the phone with another charger.

If the problem persists, it may indicate a malfunction of the matrix or screen controller – a diagnosis will be required at the service center.

💡

To test the screen for broken pixels, download the Dead Pixel Test app and run the test on monochromatic colors. The broken pixels will be visible as colored dots on a uniform background.

Comparison with modern smartphones: is the screen relevant in 2026?

It’s been almost 5 years since the Redmi Note 8 Pro was released, and screen standards have changed a lot over that time. Let’s compare its display to the current budget smartphones of 2023-2026:

Against the background of modern smartphones, the screen of the Redmi Note 8 Pro loses by:

• ⚡ Upgrade frequency: 60 Hz vs. 90-120 Hz for new models.
• ☀️ Brightness: 500 nits is not enough for comfortable use in the sun.
• 🎮 Response: IPS has a high input delay (~50 ms than AMOLED (~30ms).

But there are also some things that make it relevant even today:

• 🔋 Energy efficiency: IPS It consumes less energy at average brightness than AMOLED.
• 🎨 Natural colors: no oversaturation, like many budgets AMOLED.
• 💰 Repairability: replacement IPS-The screen is 2-3 times cheaper than AMOLED.

💡

If you choose between the redmi Note 8 Pro and the new budget in 2026, the screen of the old model loses in technology, but wins in reliability and maintainability.

How to check the screen when buying a redmi Note 8 Pro

If you plan to buy the Redmi Note 8 Pro from hand, be sure to pay attention to screen diagnostics.

Check the screen for scratches and chips (especially around the edges)|Check the reaction to touch in all corners|Run the broken pixel test (Screen Test app)|Watch the black background video at maximum brightness (look for backlight bleed)|Make sure that the automatic brightness is working correctly.

-->

Pay particular attention to the following points:

1. Scratches on glass. Gorilla Glass 5 protects against cracks, but scratches from keys or sand still remain. Check the screen at an angle - scratches will reflect light.
2. Yellow spots on the edges. This is a sign of backlight bleed. Turn on the black background and look at it from an angle, the defect will be noticeable.
3. Press the divorce. Press the screen when it's off. If colored divorces occur, it's a sign of detachment.
4. Uneven response. Swipe your finger across the screen in the settings menu, no delays or missed touches.

If the seller claims that the screen has changed, ask for a check or warranty.Substituting the original display with a non-original one (for example, from the manufacturer's No-Name) can lead to:

• 🔄 Incorrect operation of the lighting sensor.
• 🎨 Distorted colors (often too cold or warm).
• 📵 Problems with touchscreen (for example, accidental touches).

⚠️ Note: If the phone has a non-original screen, update MIUI through official channels may not work – the system blocks the firmware due to the discrepancy of the identifiers of the modules.

Modding and upgrade: can the screen be improved software?

While the hardware specifications of the screen cannot be changed, some parameters can be optimized software.

1. Increased refresh rate (acceleration to 90 Hz)

Technically, the Redmi Note 8 Pro does not support a frequency above 60Hz, but some enthusiasts are trying to get around this limitation by:

• 📱 Custom firmware: For example, Pixel Experience or LineageOS with overclocking patches.
• 🔧 Modified cores: such as Perseus Kernel, which optimize the display performance.

However, there are risks: overheating of the processor, accelerated wear of the matrix, unstable operation MIUI.

2. Calibration of flowers through ADB

If you are not satisfied with the color reproduction, you can manually calibrate the screen through the ADB. For that:

1. Turn on the debugging. USB In Settings → The phone. → Version. MIUI (tap 7 times on the assembly number).
2. Connect your phone to your PC and execute the command: adb shell settings put system screen_color_temperature 6500 (where 6500 — temperature in Kelvin; experiment with values from 5000 before 8000).

3. Turn off the flashing of the backlights (PWM)

Many IPS-screens use PWM (PWM) To adjust brightness, which can cause eye fatigue.Redmi Note 8 Pro high frequency PWM (~2000 Hz), but some users still feel uncomfortable:

• Set the brightness to 100% (at this mark PWM is turned off).
• Use applications like this. PWM Free for manual settings.

⚠️ Note: Screen modding through custom firmware or ADB This can lead to loss of warranty (if it is still valid) and unstable operation of the fingerprint sensor.

FAQ: Frequent questions about the Xiaomi Redmi Note screen 8 Pro