Xiaomi Redmi Note 5 is one of the most popular smartphones in the budget segment, released in 2018. Despite its age, the model is still in demand due to the balanced characteristics and affordable price. However, when choosing or repairing this device, many users are faced with the question: which display is installed in the Redmi Note 5 and how it differs from its counterparts?
In this article, we will take a closer look at the specifications of the Redmi Note 5 screen, compare it with competitors (such as the Samsung Galaxy J6 or Honor 7X), and give recommendations for setting the display for maximum comfort, paying special attention to common problems such as yellow screen tint, broken pixels or poor color reproduction – and how to fix them.
If you’re planning to buy a used device, repair a screen, or just want to optimize your display, this information will be useful. We’ll also uncover myths about the “original” and “unoriginal” arrays for the Redmi Note 5 and explain how to distinguish a quality replacement from a fake.
Technical characteristics of the display Xiaomi Redmi Note 5
The Xiaomi Redmi Note 5 screen is made using IPS LCD technology with a diagonal of 5.99 inches and an aspect ratio of 18:9. This was a pioneering solution for the budget segment in 2018, as most competitors still used the 16:9 standard. The display resolution is 2160×1080 pixels (Full HD+), which provides a 403 ppi pixel density – quite enough for clear text and graphics.
Among the key features of the matrix:
- 🔹 Brightness: up to 450 nits (according to the manufacturer), real tests show 380-420 nits at maximum settings.
- 🎨 Color coverage: ~95% sRGB, which is typical for IPS-budget segment matrices.
- ⚡ Energy consumption: lower than that of AMOLED, but higher than modern LCD backlit.
- 🛡️ Protection: Corning Gorilla Glass 3 (some versions - without protection).
Importantly, the Redmi Note 5 came in two versions: the standard and the Redmi Note 5 Pro (for India), using the same display but with slightly improved color reproduction due to software calibration, both models support Sunlight Display technology, which automatically increases contrast in bright light.
IPS vs AMOLED: Why Xiaomi chose LCD for Redmi Note 5
Many users are wondering why Xiaomi did not equip the Redmi Note 5 AMOLED-The answer lies in several factors, as did competitors (such as Samsung in the Galaxy A line:
- Cost: IPS-matrix cheaper in production, which allowed to keep the price of the device at the level of 10-15 thousand rubles (at the time of release).
- Reliability: LCDs are less prone to pixel burnout and degradation over time, which is important for the budget segment.
- Color rendering: IPS provides more natural colors out of the box, whereas AMOLED often requires manual calibration.
However, IPS has its disadvantages:
- ❌ Contrast: black on the color IPS It looks gray (contrast ratio) ~1000:1 against ∞:1 AMOLED).
- ❌ Viewing angles: color distortions are possible when the screen is inclined (especially noticeable on a white background).
- ❌ Thickness: LCD-thicker AMOLED, What affects the total weight of the device (181 g of the Redmi Note 5).
By comparison, the Samsung Galaxy J6 (2018) with Super AMOLED display had a contrast ratio of ∞:1 and weighed 154 g, but cost 20-30% more. Xiaomi bet on the balance of price and quality, sacrificing the “wow effect” AMOLED.
💡
If you are not having enough flowers IPS-on the screen, turn on the "Reinforced Color Transfer" mode in the settings: Settings → Display. → Colors.
Common Display Problems with Redmi Note 5 and Their Solutions
Despite its reliability, the Redmi Note 5 display is not without typical IPS-matrix problems, and here are the most common user complaints and ways to resolve them:
| Problem. | Reason. | Decision |
|---|---|---|
| The yellow tint of the screen | Defect of illumination or factory calibration | Disable "Auto-Brightness" and manually adjust white balance in Settings → Display → Color tone |
| Broken pixels | Physical damage to the matrix | Replacement of the display (cost ~3-5 thousand rubles) |
| Screen flickering | Low frequency PWM (240 Hz) | Increase brightness above 50% or turn on "Read Mode" |
| Poor touch sensitivity | Sensory layer wear or pollution | Clean the screen with alcohol, update the firmware or replace the touchscreen |
Critical information: The screen flickering at low brightness (below 30%) is due to PWM (pulse-latitudinal modulation) technology, which is used to adjust the backlight. The Redmi Note 5 has a PWM frequency of 240 Hz, which can cause eye fatigue in sensitive users. To reduce the effect, it is recommended:
- 🌞 Use brightness above 50%.
- 📖 Insert "Reading mode" (Settings) → Display. → Reading mode).
- 🌙 Activate the dark theme in MIUI.
How to check broken pixels on Redmi Note 5?
⚠️ Warning: If colored stripes or squashes appear on the screen after the smartphone crash, this indicates damage to the display plume. Self-repair can lead to complete loss of image - contact the service center.
How to distinguish the original display from a fake when replacing
When repairing the Redmi Note 5, many people are faced with the problem of unoriginal parts. Fake displays can have worse color reproduction, less brightness or sensor malfunction.
- Marking: The original display must have a sticker labeled Tianma (maker of matrices for Xiaomi) or BOE. Counterfeits are often labeled by unknown brands.
- Color rendering: The original is neutral white (temperature ~6500K) and can give a blue or green tint to fakes.
- Brightness: The original is 400+ nits bright, and counterfeits rarely exceed 350 nits.
- Sensor: The original touchscreen supports 10 touches at a time. Counterfeiters can have delays or misses of touches.
The cost of the original display for the Redmi Note 5 (including touchscreen and frame) is 4-6 thousand rubles (2026), counterfeits can be found for 2-3 thousand rubles, but they often fail after 3-6 months.
Test for broken pixels (use monochromatic screensavers)
Touch sensitivity check (swipe your finger around the edges of the screen)
Sun brightness test (image should be visible)
Color rendering check (compare with another device)
-->
⚠️ Note: When replacing the Redmi Note display 5 Make sure you check compatibility with the device version. Modifications for the global market (Global) and India (India) may have different plume connectors! 5 rival 2018 To objectively evaluate the screen Redmi Note 5, Compare it to the displays of popular competitors of the same year: Model Display Type Resolution Brightness (thread) Color coverage Xiaomi Redmi Note 5 IPS LCD 2160×1080 450 95% sRGB Samsung Galaxy J6 Super AMOLED 1480×720 500 110% sRGB Honor 7X IPS LCD 2160×1080 430 96% sRGB Nokia 6.1 IPS LCD 1920×1080 500 98% sRGB As seen from the table, Redmi Note 5 Losing Samsung Galaxy J6 in contrast and saturation (because of the AMOLED), But it wins in resolution, compared to Honor. 7X The differences are minimal, but Xiaomi has better optimisation of the display software (e.g. Sunlight Display mode). The Nokia 6.1 has a brighter screen but lower resolution. If color rendering is critical to you, consider Samsung with a lighter screen. AMOLED. If price and clarity are important, the Redmi Note 5 is one of the best options. 💡The main advantage of the Redmi Note 5 display is the combination of Full HD+ permissions and technologies IPS, This provides clarity without the pixelation effect characteristic of HD-Optimum display settings for Redmi Note 5 Even with factory settings, the Redmi Note 5 screen performs well, but a few tweaks will help improve the experience: Color temperature: Go to Settings → Display. → Color tone. Select Standard for natural colors or Warm for less eye strain in the evening. Adaptive brightness: Turn off Autobrightness in Settings → Display if you notice unstable lighting. Set brightness manually to 60-70% for balance between comfort and autonomy.Read Mode: Enable in Settings → Display. → Read mode to filter blue light. Set up a schedule (e.g. 21:00 to 7:00). Font size: Increase font in Settings → Display. → Text size if screen 5.99" is not enough for comfortable reading. For advanced users, hidden settings are available through the engineering menu: Dial in ##36446337##. Select Display Test to check color reproduction and broken pixels. In the Color Temperature section, you can more accurately adjust the balance RGB (Not recommended without knowledge!). ⚠️ Warning: Changing the settings in the engineering menu can cause the display to malfunction. Write down the starting values before editing! Frequently asked questions about the Redmi Note 5 display. IPS-display AMOLED Redmi Note 5? No, it's technically impossible. AMOLED-The arrays require a different lighting controller and connectors that the Redmi Note 5 doesn't have, and the cost of this modification will exceed the price of the smartphone itself. Why does the Redmi Note 5 screen flicker at low brightness? This is due to PWM technology. Redmi Note 5's flickering frequency is 240 Hz, which can be uncomfortable. Solution: increase brightness above 50% or activate Read Mode. How do you remove the yellow tint on the screen? Yellow tint can be caused by factory calibration or backlight defect. Try: Turn off "Auto-Brightness" in settings. Select "Cold" mode in Settings → Display. → Color tone. If the problem persists, it's a matrix defect that needs to be replaced. How much does it cost to replace a Redmi Note 5 display in 2026: 🔧 Original display (with touchscreen): 4-6 thousand. ruble. 🔧 Unoriginal (Chinese analogue): 2–3 thousand rubles. 🔧 Glass replacement (without matrix): 1.5–2.5 thousand rubles (if the touchscreen is intact — 1–2 I'm in the service center for an hour. 5 Pro for the regular Redmi Note 5? Yes, the displays are interchangeable because they use the same Tianma matrix or BOE permittingly 2160×1080. However, make sure the firmware version supports color calibration for the Pro model.