Where is the power button Xiaomi Mi TV: search, hide and repair

Finding the power button on modern Xiaomi TVs often turns into a real puzzle for owners. The company's engineers strive for minimalism, removing physical controls from the front panel to avoid disturbing the aesthetics of the thin bezels. As a result, the power button can be hidden on the bottom edge, behind or even absent as a separate mechanical switch, giving way to the touch panel.

Owners of the Global Version series or Chinese versions with Android TV installed face different control layouts. Understanding the logic of manufacturers helps to quickly navigate the design of the device without resorting to blind groping. In this article, we will discuss in detail all possible options for the location and ways of activating the TV.

If you've just unpacked your device or found that the remote has stopped responding, this information will be critical to you, and we'll look not only at the standard locations, but also at the nuances of touch control, which is often confused with the complete absence of buttons.

Classic location on the back panel

The most common place manufacturers place controls is in the rear wall of the case. In most Xiaomi Mi TV and Redmi TV models, the button panel is located in the lower right or central part of the back side, and you will need to gently feel a small bulge or indentation, which is often indicated by the brand logo or the power symbol.

The design of this panel may vary depending on the year of release of the device. In older models, the buttons protrude above the surface of the body, which allows you to press them to the touch. New versions use a joystick or one multifunction button that responds to short presses and holdings. Pressing down usually turns on the TV, and holding causes a menu.

⚠️ Warning: Do not exert excessive force when pressing the buttons from behind. The plastic in this area can be thin, and a sharp mechanical impact can damage the internal plumes or the button itself.

To make it easier to navigate the menu without a remote, a circuit is often used where one button is responsible for all actions, a short press changes the signal source or volume, and a long press turns the device on or off, which allows you to save ergonomics and minimize the number of holes in the case.

Hidden buttons on the bottom edge and ends

In pursuit of a bezel-free design, Xiaomi engineers often shift control to the bottom of the TV, which can be a narrow strip or a separate button disguised as the color of the body, which can be barely noticeable on a black or silver background, requiring good lighting for detection.

Sometimes the power button is paired with the performance indicator or located next to the IR receiver, in such cases, you need to swipe along the bottom edge, stepping away from the center. On some models of the Mi TV Stick series or brand monitors, the button may be on the side end, closer to the place of attachment of the power cable.

• 🔍 Carefully inspect the lower edge of the center, looking for the Mi or Redmi logo, which can be a touch button.
• 🖐 Swipe your hand along the bottom edge of the back to find a protruding control.
• 💡 Light up your smartphone flashlight along the junctions of the case to see the hidden markings.

So if you just touch it with your finger, you activate it, and if you touch it with your finger, you can set it up for a longer time, and if you don't click it mechanically, it doesn't mean you're not doing it.

Touch control and joysticks

Modern Xiaomi Mi TV P1 and newer series often come with a control system where one button replaces the entire remote. This can be a small joystick located at the back that needs to be deflected in different directions. The logic here is as follows: pressing the joystick (like a button) turns on the TV, deviation up or down regulates the volume.

And you also have a touchpad hidden under the logo, which when it's off, it's not illuminated, it's only visible when you're powered or touched, and it creates the illusion of no buttons, but the functionality is maintained, and it often requires a brief touch to turn on, and a long hold to turn off.

💡

If the button is touch-sensitive, try touching it with a dry warm hand – cold fingers may react less to the sensor in some models.

Users often confuse standby with full shutdown. When using touch control, the TV may not respond to short taps if it is in deep sleep, in which case holding the button for 3-5 seconds helps, which initiates a full cycle of the operating system start-up.

How to turn on the TV without a physical button

There are situations where the mechanical button is faulty, lost or blocked by a wall mount, and in such cases, alternative methods of activating the device come to the rescue, and the easiest way is to use a remote control that must be connected to the TV in advance.

If the remote is not working, you can use the Mi Remote app or Android TV Remote Control on your smartphone, which requires that the phone and TV are on the same Wi-Fi network. The application allows you to fully emulate the remote, including the power on function, if the TV was not completely powered down.

⚠️ Warning: Wi-Fi on only works if the TV is in standby mode. When completely disconnected from the network, program launch is impossible.

Another option is to use HDMI-CEC. If you have a Mi Box, a game console or other media player that supports this technology, turning on the external device will automatically start the TV, which is a convenient feature for creating a smart home.

Table of button location by model

To organize the information, we have prepared a summary table for popular models, and note that depending on the region of supply (Global, CN, EU), the location of the elements may vary slightly.

This table covers most common cases, but always refer to the instructions of a specific modification. In some revisions, manufacturers can change the layout of the board and the removal of controls to other parts of the case without changing the model number.

Diagnostics of power button malfunctions

If you find a button, but the TV doesn't respond to the press, the problem may be in the hardware, and the common problem is that the contacts oxidize inside the machine, or the plume breaks off to the control board, which is visually difficult to determine, requiring disassembly of the housing.

It's also worth checking the power supply. If the standby light doesn't burn at all, maybe the problem isn't the button, it's the lack of voltage at the input. Check the power outlet, the power cable, and the safety lock integrity inside the TV. Sometimes a power surge will disable the input cascade.

In the event of software failures, the button may not work due to the operating system freezing, and in this situation, a forced reboot helps by disconnecting the TV from the power grid for 5-10 minutes, and after switching on the network, the system restarts, and the button can work.

Resetting and hardware repair

When software methods don't work, it may require a factory reset. On many Xiaomi models, this can be done by holding the on button (or volume button, if any) when the power cord is plugged into the outlet. The TV must enter Recovery mode.

If the problem is physical, the button is pressed, cracked or not clicking, you need a replacement, and you order a button plume specifically for your model, and the replacement process requires care: you need to remove the back cover, disconnect the matrix and the main board plume to access the control module.

⚠️ Warning: Self-repairing TVs is not warranty. If the device is warranty service, contact an authorized Xiaomi service center.

When you change the button, it's important to connect the plume correctly. Incorrect connection can short circuit and cause the motherboard to fail. If you're not confident in your abilities, you'd better leave this procedure to the professionals.

💡

The physical button on Xiaomi TV is often a multifunction joystick that requires not just pressing, but deflecting or holding to activate the desired feature.