How to get in BIOS Xiaomi Mi Notebook Pro: All ways and solutions to problems

Xiaomi Mi Notebook Pro laptops have gained popularity due to a combination of performance, stylish design and affordable price. However, when setting up hardware, updating firmware or troubleshooting users often require access to the device. BIOS (or its modern counterpart — UEFI). Unlike most PCs, where the input is made by a standard key. F2 For Xiaomi devices, this process has nuances related to the fast booting of Windows and the features of the hardware platform.

This article will help you understand how to enter the right place. BIOS Mi Notebook Pro (including models) 15.6" 2019/2020/2021/2022 and 14" 2020/2021), Even if the system boots too fast or the keys don't respond, we'll look at all the current methods, from the classic use of hot keys to alternative methods through Windows, and we'll also look at common errors and their solutions. BIOS password (relevant for corporate devices) and cases when the laptop does not respond to clicks at all.

Why the Standard Ways to Enter BIOS Not working on Xiaomi Mi Notebook Pro

Many users are faced with the fact that the usual keys (F2, Del, Esc) doesn't work when you turn on your laptop:

• 🚀 Fast Boot: The default feature on Windows 10/11 and UEFI reduces the start time by skipping the stage where you can press the key to enter the BIOS.
• ⚡ Xiaomi Optimization: Manufacturer Customizes UEFI so as to minimize delays, which prevents keyboard control interception.
• 🔒 Secure Boot: If this security mode is activated, it can block alternative ways of entering.
• 🖥️ Hardware features: Some revisions of the Mi Notebook Pro motherboards use a non-standard key combination.

In addition, on laptops with Windows preinstalled (especially on models for the Chinese market), the Quick Start function in the power settings can be activated, which further reduces the window for entering the power supply. BIOS. This is not a bug, but a conscious decision of the manufacturer – but it creates difficulties for users who need to change the boot settings or disable Secure Boot to install alternative OSes (for example, Linux).

Method 1: Classical input with hot keys

Despite the optimization, the most reliable way to get into the BIOS — Use keys when you turn on. For Xiaomi Mi Notebook Pro, the following combinations are relevant:

Algorithm of action:

1. Turn off your laptop completely (not restart!).
2. Press and hold the key. F2 (table-shaped).
3. Without releasing the key, press the power button.
4. Hold on. F2 before the blue screen BIOS (usually 3-5 seconds).

⚠️ Note: If the laptop is connected with a charger, try to disconnect it - on some models this prevents the keys from being triggered.

Turn it off. USB-devices (mouse, keyboard, flash drives)

Close the laptop cover for 10 seconds to completely turn off

Use the original keyboard (not Bluetooth)

Try to connect the external USB-keyboard if the built-in does not respond-->

Method 2: Entering through the Windows boot menu 10/11

If the hotkeys don't work, you can use the built-in Windows tools, which works even when the Fast Boot is on:

1. Open Options → Update and Security → Recovery.
2. In the Special Download Options section, click Reboot Now.
3. After the reboot, select: Diagnostics → Additional settings → UEFI embedded software settings.
4. Click Reboot – the laptop will automatically log into the BIOS.

Alternative path through Command Prompt (launch it on behalf of the administrator):

shutdown /r /fw /t 0

This command instantly restarts the system into mode. UEFI. This method is particularly useful if:

• 🔄 The laptop loads too fast and you don’t have time to press. F2.
• 🖱️ Keyboard malfunctioning or connected via Bluetooth.
• 🔒 BitLocker is enabled – in this case, after logging in BIOS You may need a recovery key.

⚠️ Note: On some models of Mi Notebook Pro with Chinese firmware item Embedded software settings UEFI It might be missing. In this case, it's just resetting the settings. BIOS (see section below).

Hot keys (F2/Del)

Through the Windows Recovery Menu

Shutdown Team /r /fw

Another way.-->

Method 3: Emergency entrance by resetting settings

If the laptop does not respond to the keys and does not load into Windows, you can forcibly reset the settings. BIOS, It often restores access:

1. Turn off the laptop and disconnect the charger.
2. Turn the case over and find a dump hole (usually signed) CMOS or CLR). On the Mi Notebook Pro, it is located next to the ventilation grilles.
3. Insert a paper clip or toothpick into the hole and hold for 10-15 seconds.
4. Connect charging and turn on the laptop – should appear screen BIOS suggestively.

If there is no hole (relevant for 2021-2022 models), perform a hardware reset:

1. Turn off the power and remove the battery (if it is removable).
2. Hold the power button for 60 seconds.
3. Connect the charger and turn on the laptop — BIOS should start automatically.

This method also helps if:

• 🔐 BIOS password blocked (reset will remove it, but will return factory settings).
• 🖥️ Laptop hangs on the logo MI Or you can get a No bootable device error.
• 🔄 There was a failure after the update. BIOS.

Solving problems with access to BIOS

Even after successfully entering the BIOS Xiaomi Mi Notebook Pro users may face difficulties. Let's look at typical scenarios and their solutions:

1. BIOS password-request

If the laptop was bought by hand or was a corporate one, the previous owner could set a password.

• 🔑 Try the standard passwords for Xiaomi: admin, 123456, Xiaomi or miui.
• 🔧 Drop it. BIOS hole CMOS (see method 3).
• 📧 Contact Xiaomi with proof of purchase – they can generate unlock code.

2. The keys or touchpad in BIOS

This is a common problem on the Mi Notebook Pro due to driver conflicts.

• 🖱️ Connect the outside. USB-keyboard (preferably wired).
• 🔄 Update. BIOS Up to the latest version (instruction below).
• 🔌 Turn it off. USB-devices other than the keyboard.

3. BIOS Chinese

On models for the Chinese market interface UEFI It could be entirely in Chinese. To switch the language:

1. Find the tab with the character (language).
2. Select English (usually the second item in the list).
3. Save the settings (F10).

- = Save & Exit (F10)

- = Advanced

- = Boot-->

4.The laptop doesn't see the boot drive

If you are trying to install Windows or Linux, but BIOS non-reflective USB-accumulator:

• 🔌 Reconnect the flash drive to another port (preferably) USB 2.0).
• 🔄 Disable Secure Boot in Security section.
• 💾 Rewrite the flash drive in format FAT32 using Rufus (select partition scheme) GPT).
• 🔧 Update. BIOS last-minute.

Update BIOS Xiaomi Mi Notebook Pro

If you have successfully entered into BIOS, But you run into bugs (for example, the keys don't work or there are no options), the reason may be an outdated version of the firmware. BIOS Mi Notebook Pro is run in two stages:

Step 1: Check the current version

1. Enter in. BIOS Find the Main or System Information tab.
2. Remember the current version (e.g., 1.07.05).
3. Compare it to the latest version on Xiaomi’s official website.

Step 2: Update

Method 1: Through Windows (recommended):

1. Download the archive with firmware for your model.
2. Unpack it and run the BIOSUpdate.exe file on behalf of the administrator.
3. Follow the instructions of the master (the laptop will reboot several times).

Method 2: Through BIOS (If Windows does not boot):

1. Download the firmware to another PC and write to FAT32-flash-drive.
2. Enter in. BIOS, Find the Advanced section → BIOS Update.
3. Select the firmware file and confirm the update.

⚠️ Warning: Do not interrupt the upgrade process or turn off the laptop, which can cause the motherboard to fail completely. If the update has been delayed for longer than 10 minutes, hold the power button for 20 seconds to force the restart.

💡

Update BIOS It solves 90% of problems with broken keys, missing options and loading errors, but if the laptop is stable, updating the firmware is not recommended - it is always a risk.

Frequent questions about BIOS Xiaomi Mi Notebook Pro