How to clean the hand vacuum cleaner Xiaomi Handheld: full instructions with photos and tips

Xiaomi Handheld vacuum cleaners (such as Mi Handheld Vacuum Cleaner, Dreame V9 or Deerma CM600) have become popular due to their compactness, power and convenience. However, even the most advanced equipment requires regular maintenance - otherwise performance drops, unpleasant smells appear, and the engine wears out faster. In this article, we will discuss how to clean the Xiaomi Handheld vacuum clean properly: from daily care to deep cleaning of filters and turbobrushes.

Many users make a critical mistake: limiting themselves to emptying the container, ignoring filters and ducts. HEPA-The filter reduces suction by 40 to 60 percent, and the buildup of dust in the engine compartment can cause overheating and breakdown, and we've put together proven cleaning methods that will extend the life of your vacuum cleaner and keep it power for years.

1.Preparation for cleaning: what will be needed

Before you start disassembling the vacuum cleaner, prepare the necessary tools and materials, which will speed up the process and protect the parts from damage.

You will need to:

• 🧼 Warm water (not hotter than 40)°C) for washing the container and filters.
• 🧴 Soft detergent (e.g. dishware) or specialized cleaner for vacuum cleaners.
• 🧻 Microfiber cloth or napkins without pile - for cleaning the case and plastic parts.
• 🪛 Screwdriver cross (if you need disassembly of the turbobrush).
• 🧲 Magnet or tweezers – to extract small debris from hard-to-reach places.
• ⏳ Drying time (minimum 24 hours for filters).

⚠️ Warning: Never use abrasive sponges, hard brushes or harsh chemicals (such as bleach) that will damage plastic, rubber seals and filter elements. Also avoid washing the engine unit - water can cause short circuits.

2. Daily care: emptying of the container and surface cleaning

Even if you use a Xiaomi vacuum cleaner daily, it is enough to perform minimal care after each cleaning.

Step-by-step:

1. Turn off the vacuum cleaner from the network (if it is connected to charging).
2. Press the Release button (or pull the lever) on the garbage container to separate it from the case.
3. Press the Open valve at the bottom of the container above the bin - dust and debris will fall out under its own weight.
4. If there are hair or threads left inside, remove them manually or with a special brush cleaning tool (company with some models).
5. Wipe the container sealing ring with a dry wipe – this will prevent dust from sticking.

💡 Tip: If the container has accumulated moist dirt (for example, after cleaning the carpet with detergent), wash it under running water and dry for at least 12 hours. moisture can cause mold.

💡

To prevent the garbage from sticking to the walls of the container, apply a thin layer of vegetable oil on them before cleaning (1 every 2-3 months).

3. Deep filter cleaning: HEPA and pre-cleaning

Filters are light vacuum cleaners, which cause power loss, engine overheating, and even breakdown, and Xiaomi hand vacuum cleaners typically have two filters:

• Preliminary (cyclonic) - captures large particles of dust.
• HEPA-filter - retains microparticles (up to 0.3 microns), allergens and bacteria.

How to clean:

1. Remove both filters from the vacuum cleaner (usually located behind the garbage container). V10 Mi Handheld 1C HEPA-filter hidden under the cover.
2. Carefully tap the filters on the trash can to shake off the dust.
3. Wash the pre-filter under warm water with a mild detergent. Use your fingers to remove the sticky dirt.
4. HEPA-Wash the filter with water only without detergents, wash it on both sides, but do not rub it, it will damage the microfibers.
5. Rinse both filters thoroughly and leave to dry for 24 to 48 hours in a well-ventilated area (e.g., on a balcony).

⚠️ Attention: Putting wet filters back into the vacuum cleaner is strictly forbidden, it will lead to corrosion of metal parts and bacterial reproduction. If the filters are not completely dry, use the dryer in cold air mode.

Empty the container after each cleaning|Shake off dust filters once every 2 weeks|Wash the pre-filter once a month|Wash HEPA-filter once 3 months|Dry filters for at least 24 hours-->

4. Turbobrush and nozzle cleaning

The turbobrush and other accessories become clogged with animal hair, threads and hair over time, which reduces cleaning efficiency and increases engine load.

Instructions for cleaning the turbobrush:

1. Disconnect the brush from the vacuum hose.
2. With a screwdriver, unscrew the screws on the body of the brush (in the Dreame T20 and Xiaomi G10 models, the mounts can be on the latches).
3. Remove the spinning shaft with bristles, remove the wound hair and debris with scissors or tweezers.
4. Wipe the bearings with a dry wipe. If you have a lot of pollution, use WD-40 (1-2 drops per bearing).
5. Put the brush back together.

For other nozzles (slit, furniture) just wash them with warm water and dry them. If there are scratches on the plastic, treat them with polyrene for plastic, this will prevent dust from sticking.

5. Smell elimination and disinfection

Over time, the vacuum cleaner may have an unpleasant odor.

• 🦠 Bacteria and mold in containers or filters (due to wet cleaning).
• 🐶 Animal wool and organic waste (e.g. food crumbs).
• 🔥 Overheating of the engine - the smell of scorched dust.

How to eliminate the smell:

1. Wash the container and filters with a solution of vinegar (1 part vinegar to 3 parts water) or use special granules for vacuum cleaners (for example, Topperr).
2. Sprinkle the bottom of the container with baking soda for 1-2 hours, then vacuum it.
3. For disinfection, use a UV lamp (bring it to the filters for 10-15 minutes) or spray with an antibacterial effect.
4. If the smell persists, check the ducts, there may be dirt inside, blow them with compressed air (such as a keyboard cleaner).

💡 Prevention: After cleaning wet surfaces (carpets with detergent), always wash the container and dry it for at least 12 hours.

Cleaning of ducts and engine

If Xiaomi’s vacuum cleaner is getting worse, but the filters and container are clean, the problem may be clogged ducts or engine dust, and cleaning these areas requires care.

Step-by-step:

1. Disconnect the vacuum cleaner from the network and remove the battery (if the model is collapsible).
2. Remove the garbage container and filters – you will have access to the duct.
3. Use a flexible brush or rag-wire to remove dust from the tube. In the Dreame V11 models, the duct can be washed with water (but only if it is plastic, without electronics!).
4. To clean the engine, use a vacuum cleaner with reverse traction (for example, turn it into blow mode) or a can of compressed air. Do not disassemble the engine unit yourself!
5. Check the sealing gums for wear. If they crack, replace them (you can order on AliExpress by model number).

⚠️ Warning: If you hear a squeak or vibration when the vacuum cleaner is running, it may indicate that a foreign object has entered the turbine.

Storage and extension of service life

Proper storage of the Xiaomi Handheld vacuum cleaner is as important as regular cleaning.

• 🔋 Charging: Store a vacuum cleaner with a charge level of 40-60%. Full discharge or constant connection to the network reduces the battery life.
• 🌡️ Temperature: Avoid storage in damp areas (bathroom, balcony in winter) or near heat sources (battery, stove).
• 📦 Position: Hang the vacuum cleaner on the bracket (if it comes with a kit) or store it in an upright position - this will prevent deformation of the hose.
• ☀️ Drying: After wet cleaning, always dry the container and filters before assembly.

💡 Advice for Dreame and Xiaomi owners: Lubricate the rubber container seals with silicone lubrication once every 6 months (e.g., grease the rubber container seals with silicone lubricant, WD-40 This will prevent them from cracking and ensure leakage.

💡

Regular cleaning of filters and turbobrush increases the life of the vacuum cleaner by 30-50%, neglect of care leads to expensive engine repairs in 1-2 years.

Frequent Questions (FAQ)