Xiaomi stuck in bootloop: how to turn off your phone and save data

Your Xiaomi or Redmi is in an endless reboot cycle, and the screen flashes the MIUI logo and goes out? It's a classic bootloop, where the system can't complete the boot and restarts all the time. The main problem is that the phone doesn't respond to the power button, and being in this mode for a long time drains the battery and increases the risk of data loss.

In this article, you will find ways to emergency shut down Xiaomi smartphone in bootloop, including forced stop through hardware buttons, battery extraction (for collapsible models) and methods using ADB. We will also analyze the causes of the problem – from a firmware failure to damage the boot partition – and give recommendations for restoring operability without losing photos and contacts.

⚠️ Critical Warning: If the phone is heated above 50°C or makes uncharacteristic sounds (squeaking, crackling), immediately stop trying to turn it on and take it to a service center.

What is bootloop and why does it originate in Xiaomi?

Bootloop is a state in which a smartphone cannot complete the initialization process and loops in the boot phase. The screen usually displays the MIUI or Fastboot logo, followed by a reboot.

On Xiaomi devices, the problem most often involves:

• 🔄 Failed firmware updates (especially when switching between versions) MIUI or after manual update via Recovery).
• 🛠️ Damage to the boot partition - for example, after incorrect unlocking of the boot loader or installing a custom recavery (TWRP).
• 🔋 Hardware malfunctions: wear of flash memory (eMMC), chip dump or problems with the power controller.
• 🦠 Viral infection (rarely, but possible when installing software from unverified sources).

According to statistics from service centers, more than 60% of bootloop cases on Xiaomi are due to software failures after updates or manipulations with firmware, the remaining 40% are due to hardware breakdowns that require repair at the chip level.

How to turn off Xiaomi in bootloop mode: 4 working methods

If the phone is stuck in a reboot cycle, the first thing to do is to interrupt the process to prevent battery drain and possible data damage. Below are the methods from the simplest to the most complex.

Method 1: Forced button stop (for most models)

On most Xiaomi and Redmi smartphones (except for models with a non-removable battery such as Mi Mix or POCO F3), you can use a hardware combination:

⚠️ Note: On some devices (e.g. Redmi Note 8 Pro), long-term button retention may result in a switch to Fastboot mode. FASTBOOT And with Android, let go of the buttons and try again.

Method 2: Battery extraction (for collapsible models only)

If your Xiaomi is a removable battery model (such as the Redmi 3S, Redmi 4A or Mi Max), you can physically turn off the power:

1. Remove the back cover (a plastic shoulder blade or mediator will be required).
2. Carefully slap the battery and disconnect the plume (if any).
3. Wait 30 seconds and plug the battery back in.

⚠️ Warning: Do not use metal objects to remove the battery - this can cause a short circuit.

Method 3: Battery discharge (extreme case)

If neither method works, you have to wait until the battery is completely discharged, and it takes hours to a day, depending on the model.

• 🔌 Connect your phone to the charger.
• 📱 Hold the power button for 20 to 30 seconds – sometimes it helps you get out of the bootloop.

💡 Useful tip: to speed up the discharge, turn on the phone maximum brightness (if the screen is turned on for a while) or connect it to the PC in data mode - this will increase the load on the battery.

Method 4: Disconnect via ADB (for advanced users)

If the phone periodically loads to the lock screen or accesses the Fastboot, you can try turning it off via ADB (Android Debug Bridge).

1. Install Platform Tools on your PC.
2. Connect the phone to your computer and open the command line.
3. Enter the command: adb devices If the device is defined, execute: adb shell reboot -p

If the command didn’t work, try to transfer the phone to Fastboot (hold the power button + volume down) and use:

fastboot oem off-mode-charge 0

💡

If the phone doesn't respond to any of the methods, it's likely a hardware problem (power controller or flash memory is damaged), which requires a diagnosis at a service center.

Table: Compatibility of shutdown methods with Xiaomi models

What to do after shutdown: System Recovery

Once you've turned your phone off, the next challenge is to bring it back to life, and the way you recover depends on the cause of the bootloop:

1.Reset via Recovery Mode

If the problem is caused by a software failure, resetting to factory settings will help.

1. Hold the power button + volume increase to enter Recovery.
2. Select Wipe Data → Wipe All Data (use volume buttons for navigation).
3. Confirm the action and restart the phone.

⚠️ Warning: This method will delete all data from the device, including photos, messages and installed apps.If the phone had important files, try the non-reset recovery methods first (see below).

2. Flashing through Fastboot

If the bootloop is caused by firmware damage, you will need to reinstall MIUI via Fastboot.

• 📥 Download the official firmware for your model from the Xiaomi Firmware website.
• 🖥️ Connect your phone to your PC in Fastboot mode (hold power). + volume-reducing).
• 📝 Run the script. flash_all.bat firmware-film.

💡 Useful advice: check the version before the firmware MIUI Installing an older version on top of a new one can result in a bootloader lockdown.

Repair of hardware malfunctions

If none of the software methods worked, the problem is likely to be:

• 🔋 Power Controller (frequent issue with Redmi Note) 7/8 fall-out).
• 💾 Damaged flash memory (eMMC or UFS).
• 🔌 Removed contacts (for example, after changing the screen).

In this case, diagnostics are required using a multimeter or a programmer (for memory checks).

• Replacement of the power controller: 2,500–4,000 ₽.
• Flush memory soldering: 3000–6,000 ₽.
• Diagnostics + cleaning contacts: 1,000-1,500 ₽.

How to Prevent Bootloop on Xiaomi in the Future

To avoid falling back into the reboot cycle, follow these guidelines:

• 🔄 Update the firmware only through official channels (Settings) → The phone. → System updates. Avoid manual installation MIUI Recovery if you are not sure of the sources.
• 🔓 Do not unblock the bootloader unnecessarily, increasing the risk of damage to the boot partition.
• 📱 Use high-quality chargers. Cheap cables and power supplies can cause power surges that cause failures.
• 🛡️ Install antivirus (such as Avast or Bitdefender) and avoid third-party app stores.
• 🔋 If the phone turns off at 20 to 30 percent charge, replace the battery, which could be a sign of a controller problem.

💡 Useful tip: regularly back up important data through Settings → Additionally. → Backup and reset or cloud services (Mi Cloud, Google Drive) will help you quickly recover information even after a complete reset.

💡

If your Xiaomi has already hit the bootloop, do not try to "fix" it with multiple reboots - this will only aggravate the problem.

Frequent mistakes when trying to turn off Xiaomi in bootloop

Many users make the situation worse by making these mistakes:

1. Long-term retention of the power button (more than 30 seconds) can cause the power controller to overheat, especially on models with MediaTek (e.g. Redmi 9T).
2. Using unofficial firmware without compatibility checks, for example, firmware for the Redmi Note 9 Pro (joyeuse shot) will not work for the Redmi Note 9S (curtana shot).
3. Connecting to charging during bootloop – this can cause a voltage surge and damage the motherboard.
4. Self-disassembly of the phone without tools. Modern Xiaomi (for example, Mi 11 or POCO F4) use adhesive tape, and a sloppy opening will damage the plumes.

⚠️ Warning: If the phone doesn't turn on after it's turned off (no charging response, no warming), don't try to "resuscitate" it by connecting it to another battery or lighting it up. This is a sign of a short circuit, and further manipulations can permanently disable the device.

FAQ: Frequent questions about bootloop on Xiaomi