How to replace the battery in the tripod Xiaomi Mi Bluetooth Zoom Selfie Stick XMZPG05YM Black: a detailed guide with photos and tips

Xiaomi Mi Bluetooth Zoom Selfie Stick Tripod XMZPG05YM Black has become an indispensable accessory for travelers, bloggers and just lovers of high-quality selfies. However, over time, even in such a reliable device, a built-in battery can sit down – and instead of the usual Bluetooth connection, you will see a flashing indicator or a complete lack of response to buttons. The service center will take from 800 to 1500 rubles for a replacement, although in fact the procedure takes no more than 15 minutes and does not require special skills.

In this article, we will understand how to replace the battery in Xiaomi XMZPG05YM, You'll learn what type of battery you need, where to buy it, what tools to prepare, and you'll get step-by-step instructions with photos of key steps. In addition, we will tell you how to extend the life of a new battery and avoid typical mistakes during disassembly.

Features of the Xiaomi Mi Bluetooth Zoom XMZPG05YM Black and battery type

Before you start replacing, it's important to understand what kind of device you're dealing with. XMZPG05YM It's a line of bluetooth-selfie sticks with a telescopic handle and a built-in remote control:

• 🔋 Type of battery: CR2032 (lithium "tablet" with a voltage of 3 V)
• 📏 Dimensions: 19–80 cm folded/decomposed
• 🔄 Head rotation: 360° horizontally, 180° vertically
• 📱 Compatibility: Android/iOS, Bluetooth connection 4.0
• ⚡ Up to 20 hours with full charge (depending on the intensity of use)

Battery CR2032 — It's a standard power cell that's used in most compact electronic devices, from remotes to fitness bracelets, and it has the advantages of low self-discharge (keeps a charge out of service for up to 10 years) and resistance to temperature extremes. However, with active use of the tripod (for example, daily shooting), a replacement may be required after 1-2 years.

⚠️ Attention: Don't confuse CR2032 battery-like CR2026 or CR2016! The latter are thinner and have a smaller capacity, and installing the wrong element will lead to unstable operation of the device or complete failure.

Signs of a discharged battery and when to change it

How do you know that the problem is in the battery, not the device itself?

• 🔴 Blinking indicator: when you press the connection button, the LED flashes red or quickly goes out.
• 🔄 Spontaneous shutdowns: Tripod disconnects from the smartphone after 1-2 minutes after connecting.
• 📵 No response to buttons: zoom, shutter trigger, or Bluetooth powering on do not work.
• 🔋 Charging doesn't help: if your model supports charging through USB (bal XMZPG05YM It's not there, but the device still doesn't work.

If any of these signs show up, there's a 95% chance that the battery is to blame, but check before you replace them.

1. Is the tripod connected to the smartphone correctly (in the Bluetooth settings should display the Mi Selfie Stick device).
2. Is the connector for mounting the smartphone dirty (dust or moisture can interfere with contact).
3. Is the cable damaged (if a wired connection is used)

💡 Useful advice: If the tripod started to "glutch" after falling or hitting, the problem may be a mechanical failure, not a battery.

Preparing for replacement: security tools and measures

To replace the battery in Xiaomi Mi Bluetooth Zoom Selfie Stick, you don’t need a soldering iron or multimeter – a minimum set of tools is enough.

• 🔧 Plastic blade or mediator (for neat opening of the body).
• 🔨 Small cross screwdriver (you may need to unscrew the screws if you have them in your version).
• 🧲 New battery CR2032 (Duracell, Panasonic or Energizer).
• 🧻 Microfiber wipe (to wipe contacts from oxidation).
• 📸 Smartphone with camera (to photograph the location of parts before disassembly).

⚠️ Warning: Do not use metal screwdrivers or knives to open the case! This can damage plastic latches or leave scratches. Also avoid touching battery contacts with your bare hands - fatty marks impair conductivity.

If you've never disassembled electronic devices, practice on an old TV remote or other unnecessary technique to help you feel the force of pressing when you disconnect the latches.

Step-by-step: how to disassemble the tripod and replace the battery

Now, to the process itself, follow the instructions carefully, because errors in this phase can cause the latches to break or damage the circuit board.

Step 1: Removal of the upper cover

1. Turn the Xiaomi tripod over XMZPG05YM And on the back of the case (where the power button is located), you'll see a small slot.

2. Put a plastic blade in the slot and gently slap the lid as you move around the perimeter. The latches should snap off with a distinctive sound.

3. If the lid doesn't lend itself, don't apply force - there may be a hidden screw. Check the holes under the rubber legs (they can be punctuated with a needle).

Step 2: Remove the old battery

1.After removing the lid, you will see a round battery. CR2032, metal-holder.

2. Gently tuck the battery with a spatula or a nail on the side (don't press the center!) It should come out effortlessly.

3. Examine the contacts: if they have a white or green coating (oxidation), wipe them with a napkin soaked in alcohol.

Step 3: Installation of a new battery

1. Take a new battery. CR2032 And place it in the nest pole «+» upwards (usually there is a marking on the body).

2. Press the battery before clicking - it should sit tightly in the holder.

3. Make sure the contacts are not bent and fit securely into the battery.

Step 4: Assembly of the body

1. Put the lid back in place and gently press it until the characteristic snap of the latches.

2. check if there are any gaps between the parts of the body.

3. Connect the tripod to the smartphone and test all the functions (zoom, shutter release, head rotation).

🔧 Key conclusion: If the tripods don't turn on after the battery is replaced, check the polarity of the battery installation. In 90% of cases, the problem is the wrong battery insert.

Where to buy a battery CR2032 How to choose a quality

Batteries. CR2032 They're sold in any electronics store, supermarket, or online, but not all the cells are the same -- cheap ones can last 2-3 times less than the original ones:

• 🏬 Offline stores: Eldorado, M. Video, Messenger, Fix Price (the latter often have shares).
• 🌍 Online sites: Wildberries, Ozon, AliExpress (but be careful with fakes).
• 🚗 Auto shops: often sell batteries for alarm fobs (same ones) CR2032).

🔍 How to distinguish a high-quality battery:

1. The body should have clear markings. CR2032 manufacturer's logo.
2. Packages must not be crippled or show signs of opening.
3. The weight of the original battery is about 3 grams (fakes are often lighter).
4. The voltage of the new battery is exactly 3 V (checked by a multimeter).

Important: Batteries without labels or labels like "Super Power" are often re-labeled, under-capacity, and they will last no more than a month.

Common Replacement Mistakes and How to Avoid Them

Even with this simple procedure, you can make mistakes that will cause the tripod to break.

⚠️ Warning: If after replacing the battery, the tripod starts to warm or emit a burning smell, immediately remove the power element.

Another common problem is contact oxidation, and if you notice a white or green coating on them, clean it with a blower or alcohol, and in advanced cases, a special contact spray (for example, Kontakt 60) will help.

How to prolong the life of a battery: tips for operation

To avoid changing your battery every six months, follow these guidelines:

• ⚡ Turn off the tripod from Bluetooth when not in use. Even in standby mode, it consumes energy.
• 🌡️ Avoid extreme temperatures: Do not leave the device in the sun or in the cold (optimally - from 0)° before +35°S).
• 💧 Protect from moisture: If the tripod is wet, dry it in rice or silica gel for at least 24 hours.
• 🔄 Clean your contacts regularly: wipe them with an alcohol wipe every 3 months.
• 📦 Keep it in a case: it will protect from dust and mechanical damage.

💡 If you rarely use a tripod, remove the battery and store it separately, which will prevent self-discharge and corrosion of contacts.

Average service life CR2032 Xiaomi XMZPG05YM If the battery goes down faster, check if the Bluetooth connection is still active in the background (this can be seen in the smartphone settings).

Frequently Asked Questions (FAQ)