Modern electronics owners often face a situation where the usual physical controls disappear from the front of the device, giving way to a minimalist design. If you wonder where the power button on Xiaomi TV is located, you are not alone: the company's engineers implement different control schemes depending on the year of release and the series of models. Most current Mi TV and Redmi TV devices may not have a separate "Power" button at all, since its functions are taken over by a multifunction joystick or touch panel.
Understanding the logic of your particular model’s control system will save you time and nerves when trying to start a device. Rather than looking for a hidden mechanical switch throughout the body, it’s important to know that modern Xiaomi TVs often use algorithms to turn on the screen by pressing any remote key or even by voice command. In this article, we’ll take a detailed look at all possible control layouts and methods for activating the TV without using a regular remote.
The evolution of control: from mechanics to sensors
Early smart TVs from Chinese manufacturers often featured a full set of physical buttons located on the bottom or side of the case. However, with the release of the Android TV operating system and the introduction of the PatchWall shell, the approach to hardware has changed, Xiaomi engineers have switched to using a single manipulator that combines the functions of on, navigation and confirmation of actions.
Modern liquid crystal matrices and LED-The panels consume minimal power in standby mode, which allows instant start, which is why the power button is now often combined with the select button or hidden under the logo. This solution also extends the life of mechanical parts, as the user less often interacts with them directly, preferring an infrared remote or control from a smartphone.
It’s worth noting that the absence of a visible button doesn’t mean there’s no physical button. In some Redmi budget series, manufacturers leave a small recessed switch that can only be reached with a thin object. At the same time, flagship Mi TV QLED models often rely solely on touch controls or automatic on when signaling from an external source.
Search for control joystick on the TV body
The most common solution for Xiaomi TVs of the last three years is to use a five-position joystick, which is usually hidden from the user's eyes and is not conspicuous, preserving the aesthetic of thin bezels. To find it, you need to carefully inspect the bottom edge of the case, directly under the Mi or Redmi logo.
In some versions, the joystick is shifted to the right or left of the center, located on the end of the panel. It is a small circular button that can be slightly recessed into the body to protect against dust and accidental pressing. Pressing the center of this joystick usually corresponds to the on command, while side offsets simulate the volume buttons and switching signal sources.
💡
If the joystick doesn’t respond to pressing, try slamming it in the center position for 5-7 seconds, an action that often acts as a hard reset, which can help if the TV is getting stuck in a black screen.
The tactile sensations of this joystick may be different from the usual buttons. It has a clear stroke and a characteristic click. If you feel a small ledge, but it does not get squeezed, perhaps your model uses a capacitive touch panel, in which case you do not need pressure, but a light touch with your finger, which is often found in premium series with a metal case, where mechanical holes are not provided by the design.
Hidden and alternative locations
If you don't find any protruding elements or touch areas on the bottom of the device, it's worth checking the side ends of the TV. In the Mi TV Stick series and some compact monitors, the power button can be placed on the back side, closer to the power connectors and HDMI, this is done for easy access when the TV is mounted on a wall close to the surface.
Sometimes the switch is disguised as a brand logo. On some models, the Mi logo is not just a sticker, but a touch button. Try to easily touch the logo with your finger — if the indicator lights up or the screen blinks, you have found a hidden control, and this design solution allows you to preserve the integrity of the front panel.
⚠️ Note: Do not use sharp objects (needles, pins) to search for a button under the logo or in narrow slits.You can damage the touch layer or punctur the matrix, resulting in expensive repairs and loss of warranty.
In rare cases, especially in older models or specific regional versions, the button can be located on the back, next to the AV In or SPDIF port. It can be colored in the body color, merging with the surface. Use the phone flashlight to highlight all facets of the device - the shine of plastic in the recess often gives the location of the hidden key.
Table: Location of buttons in different Xiaomi series
To make it easier to search, we've organized data across popular TV lines, and note that within a series, the location may vary slightly depending on the diagonal of the screen.
| TV series | Type of management | Location of the element | Features |
|---|---|---|---|
| Mi TV 4A / 4X | Physical joystick | Lower face, downtown | Requires pressing to turn on |
| Mi TV P1 / Q1 | Sensor/Joystick | Lower face, right | Sensitive to touch. |
| Redmi TV X Series | The button under the logo | Center, under the logo | Hidden location |
| Mi TV Stick | The button on the body | Side, by the power connector. | Small, drowned. |
As you can see from the table, the layout of the elements varies greatly. If your model is not listed, follow the general rule: look for controls at the bottom of the device, as this is the ergonomics standard for Xiaomi TVs. The top edge is almost never used to accommodate controls due to the inconvenience of access.
☑️ Diagnostics of inclusion problem
Turning on the TV without a physical button
The situation where the physical button on the case is faulty or missing is solved thanks to the smart home ecosystem. Xiaomi TVs run on Android, which allows you to use the smartphone as a full remote control, but this requires pre-tuning. If the TV is in sleep mode, a regular Wi-Fi remote may not work, so it is important to know the nuances.
To control the Mi Home or Google Home app, the TV must be connected to the same Wi-Fi network as the phone. However, if the device is completely turned off (deep sleep mode), the first wake-up signal must still be pressing the joystick on the case or command from the IR remote. Bluetooth remotes, which come with new models, are able to turn on the TV at a distance of up to 10 meters even without direct vision.
If the remote is lost, and the joystick on the body does not work, you can use it. USB-keyboard or mouse. Connect the periphery to the port. USB In some versions of firmware, pressing any key on the keyboard (such as Enter or Space) can trigger a sleeper exit. HID TV-operator.
The secret of the IR adapter
Inclusion problems and programmatic failures
Sometimes the user searches for the power button because the TV has stopped responding to standard commands. In 80% of cases, the problem is not mechanically breaking the button, but the Android TV operating system freezes. In this case, repeatedly pressing the power button will not work, since the software controller does not process interrupts.
To solve this problem, you need to perform a power reset cycle: disconnect the TV from the power grid completely, pulling the plug out of the socket. Wait at least 60 seconds for the capacitors on the board to run out and the RAM is cleared. Once you turn on the network again, try pressing the joystick or power button. This action resets static electricity and forcibly restarts the hardware controller.
⚠️ Attention: If after the power outage, the LED light bulb indicator does not light up at all, the problem may be in the power supply or network cable, not in the power button.
Also worth checking is the power saving settings. The Settings → General → Energy Saving menu can activate a mode where the TV turns off on a timer or when there is no signal. In some cases, it helps to turn off the Fast Boot feature, which puts the TV into deep sleep mode instead of completely turning off, which sometimes causes software conflicts.
Repair and replacement of the switching buttons
If you are convinced that the button is physically broken (failed, does not make a click, oxidized contacts), you will need to disassemble the device. Xiaomi TVs are characterized by a modular design, but access to the control plume often requires removing the back cover. Before starting any work, make sure that the device is disconnected from the network for at least 15 minutes.
The repair process usually involves removing the plastic case, disabling the matrix plumes, and finding the Key Board, which is small in most models and is attached to a double-sided scotch or screws to the plastic frame. Replacing the button requires soldering skills, as it often does not change the entire module, but a specific tactile switch.
If you don't have experience with electronics, disassembling yourself can damage the fragile matrix, a crack on the screen or damage to the decoder plume will make repairs economically inefficient, and in such cases it is more rational to contact an authorized service center, where you will diagnose and replace the entire control fee if necessary.
💡
In most cases, the "lost" of the power button is a design feature, not a breakdown: Look for the joystick under the logo or on the bottom edge, or use a smartphone with an IR port to control.