Xiaomi Redmi phone does not turn on beyond Android screensaver – what to do in 2026

The situation is familiar to many: you press the power button on Xiaomi Redmi, the MI logo or Android animation appears, but the phone does not load further. The screen can flash, reboot in a loop or simply freeze in one image. The reasons for this behavior are diverse, from software failures to hardware malfunctions. The main rule is: do not panic and do not rush to bring the device to the service. In 80% of cases, the problem can be solved on your own, even without special skills.

In this article, we’ll look at all the possible causes of Redmi hanging on the screensaver, from simple (battery dead) to complex (damaged firmware), how to diagnose a problem, what actions to take first, and when to really contact the wizard. We’ll focus on the Redmi Note 10/11/12, Redmi 9/10 and POCO models, as they are more likely to experience similar failures due to the features of MIUI firmware.

Before you start the repair, answer two questions:

1. Does the phone react to charging (lights indicator, vibrates when connecting the cable)?
2. Did the problem arise after an update, drop or self-firmware?

The answers will help narrow down the possible causes and save time.

1. Checking the underlying causes: battery, charging, buttons

Start with the simplest — eliminate hardware issues that don’t require disassembling the phone. Often Xiaomi Redmi doesn’t turn on beyond the logo because of a banal battery discharge or faulty cable.

How to check:

• 🔌 Connect your phone to the original charger (don't use cheap cables or power bank). Leave at least 30 minutes on the charger. If the indicator doesn't burn, try another socket or adapter.
• 🔋 Press and hold the power button. 10-15 And in seconds, sometimes it helps to wake up the phone when it's deep. NFC (e.g. Redmi Note) 11 Pro) the button may be less responsive.
• 🔄 Try Forced Reboot: Squeeze Power + Volume up for 20 seconds. Some models (POCO X3, Redmi 9T) The combination may be different – nutrition + Loudness down.

If the phone is responding to charging (vibrates, lights up), but does not turn on, the problem is more software, if there is no reaction, there may be malfunctions of the battery, power controller or motherboard.

⚠️ Warning: Don't use "fast charging" from other brands (such as Samsung or OnePlus). Xiaomi is sensitive to voltage and an incompatible adapter could make the problem worse.

2. Hanging on the MI/Android logo: software reasons

If the Redmi phone turns on but doesn't go beyond the screensaver, it's the software's fault.

• 📱 Update failure MIUI — interrupted patch installation or “curved” firmware.
• 🧹 Application conflict – viruses, incompatible apps or root rights.
• 🔄 Damaged memory - errors in the section /system or /data.
• 🛠️ Failed resetting of settings through Recovery.

How to diagnose:

1. Connect your phone to your PC. If your computer makes a connection sound but doesn't detect the device, that's a sign that the bootloader is working, but the firmware is broken.
2. Try to log into Recovery Mode (Plug Power + Volume Up). If the menu opens, the chances of recovery are high.

Redmi models with a locked bootloader (such as global versions) may need to unlock through the Mi Unlock Tool. But this is risky - if you make a mistake, the phone will turn into a "brick".

3. Reset settings via Recovery Mode

If the phone responds to buttons and enters Recovery, try hard reset, which will delete all data, but will restore the system to work.

Instructions for Xiaomi Redmi:

1. Turn off the phone (if it doesn’t respond, wait for the battery to run out).
2. Press Power + Volume up until the MI logo appears.
3. From the Recovery menu, select Wipe Data → Wipe All Data (use volume buttons for navigation, power for confirmation).
4. After reset, reboot through Reboot.

On some models (Redmi Note 8 Pro, POCO F3), the Recovery menu can be in Chinese. Look for characters like "" (clear data) or "" (reboot).

⚠️ Note: Phones with a linked Mi Account may require login/password entry after reset. If you do not remember the data, use the official recovery service before reset!

4. Flashing through Fastboot (for power users)

If the reset doesn't work, you just have to reflash the phone through Fastboot mode, which is a radical method that requires a PC, USB-Cable and branded tools from Xiaomi.

What you need:

• 🖥️ Windows computer 10/11 (on Mac/Linux There may be problems with drivers).
• 📋 Firmware for your model (download only from the official website).
• 🛠️ Used by Mi Flash Tool, ADB/Fastboot drivers.
• 🔐 Unlocked bootloader (for some models).

Step-by-step:

1. Install ADB drivers and unpack the firmware into a folder without Cyrillic.
2. Press Power + Volume Down to enter Fastboot (a bunny with the inscription Fastboot should appear).
3. Connect your phone to your PC and start the Mi Flash Tool.
4. Select the firmware folder and click Refresh → Flash.
5. Wait until it's over (10-15 minutes) and the phone will reboot automatically.

For models with a locked bootloader (Redmi Note 10S, POCO M4 Pro), first unlock it through the Mi Unlock Tool (requires a tied Mi Account and wait 72-168 hours).

💡

Before firmware, disable the antivirus on your PC - it can block Mi Flash Tool utilities as suspicious. USB-port (the front panel may not have enough power).

5. Hardware malfunctions: when a workshop is needed

If none of the software methods worked, the problem could be the hardware. Common hardware reasons for hanging on the logo are:

• 🔋 Faulty battery – bloating, short circuit or drop of contacts.
• 📱 Damaged motherboards – burnt-out power or memory chips (often after falling or getting moisture).
• 💾 Mistakes. eMMC/UF — wear of flash memory (typical for budget models after 2-3 years).
• 🔌 Oxidized contacts – for example, after liquid is ingested.

How to diagnose:

• Light a flashlight on the screen at an angle - if you see a weak image, the problem is in the backlight or plume.
• Smell the phone – the smell of burning indicates the burned elements.
• Shake the device – if you hear a noise element inside, the chip may have soldered off.

Cost of repair in the service:

• Battery replacement: 1,500–3,000 ₽.
• Microchip soldering: 3,000-10,000 ₽.
• Replacement of eMMC memory: 5,000–15,000 ₽ (Sometimes it’s cheaper to buy a new phone).

⚠️ Warning: If the phone stops turning on after falling or getting moisture, don't try to sew it! This can finally kill the board.

6. Alternative methods: EDL and test modes

If Fastboot is not available, then EDL (Emergency Download Mode) is the "hidden" mode for firmware through a special cable or short circuit of contacts on the board.

How to log into EDL:

1. Turn off the phone.
2. Hold the Loud up. + Loud down and plug in. USB-plug-in.
3. Hold the buttons for 10-15 seconds. If the drivers are installed, Qualcomm HS-USB QDLoader 9008 will appear in Device Manager.

For firmware in EDL, use the Mi Flash Tool or QFil (for Qualcomm chips).Risks: If you make a mistake, the phone can turn into a brick without the ability to recover.

Test modes:

• 🔍 Diagnostic Mode – Press ##4636## on the keyboard (works if the phone is switched on occasionally).
• 📡 Safe Mode – Keep Volume Down until Safe Mode is added.

💡

EDL mode is the last chance to save the phone, but it requires special cable (EDL-cable) or soldering skills, and without experience, it's better to trust this to the professionals.

7.Prevention: How to Avoid Hanging on a Logo in the Future

To avoid the problem recurring, follow simple rules:

• 📲 Update regularly MIUI, Do not install the beta version on the main phone.
• 🔄 Do not interrupt the process of updating or resetting settings.
• 🛡️ Use reliable antivirus software (such as Malwarebytes) to check your downloaded files.
• 🔋 Avoid battery discharge below 10% – this can damage the power controller.
• 💾 Do not fill the phone’s memory “to the end” – leave at least 5 GB of free space.

For Redmi models with AMOLED-screens (Redmi) K50, POCO F4) It is also recommended to disable Always On Display in settings, as this shortens the display life and can lead to graphical crashes.

FAQ: Frequent questions about the Xiaomi Redmi hangout