How much is the protective glass on Xiaomi Redmi 9 Pro: prices and details

Xiaomi smartphone owners often face the unpleasant situation when the device screen is covered with a network of cracks or has deep scratches that interfere with the view. For the Redmi 9 Pro model, which differs in the curved edges of the display (2.5D), the issue of protecting or replacing the top layer of glass is especially acute. Many users confuse the concepts of “protective film” and “protective glass”, and do not understand the difference between replacing only glass and replacing the entire display module in the assembly.

The cost of solving the problem depends on what exactly you plan to buy: a cheap accessory for prevention or a full-fledged part for repairing a broken screen. The market is full of offers where the price varies from a couple of dollars to tens of thousands of rubles. In this article, we will discuss in detail the pricing policy, types of glasses and the economic feasibility of various methods of restoring your gadget.

It’s important to understand that the curved edges of the screen on the Redmi 9 Pro create additional challenges when sticking and manufacturing accessories. Cheap options often just don’t stick on the sides or peel off after a week of use, which is why the issue of price here is closely intertwined with the question of the quality of adhesion and oleophobic coating.

Factors Affecting the Cost of the Accessory

The price of the protective glass for the Xiaomi Redmi 9 Pro is influenced by several key factors that are often ignored by buyers when choosing in online stores: first of all, the type of coating and glue technology. Full glue glass is much more expensive than analogues with a silicone layer only around the perimeter.

The second important aspect is the hardness of the material, measured on the Mohs scale or in H units (Hardness). Quality products are labeled 9H, which guarantees resistance to keys and knives, but does not make them bulletproof. Harder and more expensive versions often have a high-end oleophobic coating that keeps the pleasant smoothness longer and repels the greasy stains from the fingers.

⚠️ Note: Excessively low price (less than) 100-150 Almost always indicates the absence of a high-quality adhesive base in the center of the screen, such glass will have "rainbow spots" and peel off at the slightest press.

The value is also affected by the accessories brand: well-known brands like Nillkin, Baseus or Spigen charge for quality control, perfect fit for the geometry of the case and complete with a frame for alignment. Cheap "nouname" options from China can have gaps or overlap part of the useful area of the matrix.

Price categories of protective glass

By analyzing the offers in the market, you can distinguish three main price categories, each of which has its own characteristics and target audience, understanding these differences will help you not overpay for unnecessary features or, conversely, not to buy a useless thing.

The first category is the budget segment, where 2-3-glass sets are sold at major Chinese sites or in subway crossings, rarely costing more than 200-300 rubles per set, the main advantage is the ability to change the accessory often if it breaks or wears, but the quality of the oleophobic layer here often leaves much to be desired: the finger slides worse, and traces of fingerprints are erased with difficulty.

The second group is medium-range products (400 to 800 rubles), the most popular segment for owners of Redmi 9 Pro. At this price you get glass with a black frame that hides the edges, and a more reliable adhesive layer. Often comes with a special frame-pattern, which makes it easier to stick at home without bubbles.

The third category is the premium segment, and the cost of these glasses can reach the level of the premium segment. 1000-1500 They are made of hardened glass of increased strength, sometimes with the addition of sapphire spraying, such accessories provide maximum transparency and tactile sensation close to the original screen.

💡

When buying glass from an offline store, be sure to ask for a flashlight on your phone and attach the glass to the screen, which will allow you to see how well it fits around the edges and whether there is any distortion of the image.

Hydrogel or Protective Glass: Which to Choose?

Owners of Xiaomi Redmi 9 Pro often face a choice: classic tempered glass or modern hydrogel film? This choice is dictated not only by the price, but also by the design features of the smartphone, in particular, the rounding of the display.

Hydrogel films are usually cheaper than high-quality films. 3D-They vary in price. 200-500 The main advantage of the hydrogel is that it perfectly fits the curved edges, without creating whitish stripes around the perimeter, which are characteristic of flat glass.

But the hydrogel has its downsides, and it's worse at protecting against the powerful shocks of compared to glass. If you drop your phone at an angle on the asphalt, the hydrogel will cushion the impact, but the screen underneath may crack, whereas the glass would take a hit and break, keeping the matrix intact.

• 💎 Tempered glass is the best protection against shocks, a pleasant slide, but can peel off at the edges of a curved screen.
• 💧 Hydrogel - the perfect fit for 2.5D, It does not beat, scratches heal, but it protects against point blows worse.
• 🛡️ Ceramic film - a compromise option, thinner than glass, but stronger than hydrogel, the average price.

If you prioritize maximum fall protection, the choice is obvious in favor of glass, but if the phone is often in your pocket with keys and you are afraid of micro scratches, the hydrogel will be a more practical and economical solution.

Cost of replacing broken glass (repair)

If you're asking how much glass costs because the screen is already broken, that's a big change. In the case of the Redmi 9 Pro, AMOLED technology is used, where the display and glass are soldered into a single module, and it's almost impossible to unclose broken glass at home without special equipment and the risk of damaging the matrix.

In service centers, the procedure of replacing glass (re-sticking) is cheaper than replacing a module assembled, but requires a high qualification of the master. The cost of such a service consists of the price of a new glass (about 500-1000 rubles) and the work of the master (1500-2500 rubles). The total amount can be about 3000 rubles, which is profitable to buy a new module.

Replacing the module assembly is a more expensive but reliable option. The original is expensive, often about half the cost of the smartphone itself. Chinese copies (OLEDs) are cheaper, but can be inferior in brightness and color reproduction.

⚠️ Note: When ordering a glass replacement service, check whether it is a repainting on your old display or a replacement of the entire module.

Cost comparison: Original vs Copy

When choosing components for repair or accessories, it is important to understand the labels. There are original Xiaomi parts, quality analogues and outright cheap consumer goods on the market. The difference in price can be threefold.

The original glass (or module) has a manufacturer logo, perfect geometry and an oleophobic coating that lasts for months. Copies often have thicker bezels, which visually reduces the screen, or less bright color reproduction in the case of displays. For protective glasses, the difference can be in the thickness and presence of a black bezels.

As you can see from the table, overpayment for the middle segment is often justified, since cheap glass has to be changed too often, which ultimately costs more.

💡

The best choice for price/quality ratio for Redmi 9 Pro are glass with 3D-Black and black frames in the price range 400-600 ruble.

Instructions for self-sticker

If you decide to save on the services of a master and stick the glass yourself, you will need not only the accessory itself, but also the right preparation. The process is simple, but requires cleanliness and care.

First, get your workspace ready. You'll do it in the bathroom, and you'll need hot water to settle the dust, and you'll need alcohol or an alcohol wipe, a dry lilaless napkin, scotch (to remove dust) and the glass itself.

The sticker process begins with a thorough cleaning of the screen. Rub the surface with alcohol, then wipe dry. Carefully examine the screen under the light of the lamp - if you see a speck of dust, remove it with a piece of tape. After that, remove the protective film from the glass (usually marked with a number 1 or a label "Back") and gently apply it to the screen, focusing on the speaker.

Press the center of the glass, and it will stick itself, pushing the air to the edges. If there are air bubbles, try to push them out with a napkin from center to edge. If there is a villi under the glass, you can try to remove it by lifting the edge of the glass with tape.

⚠️ Warning: Don't push hard on the center of the screen when you stick it, especially if it already has cracks.

Where to buy and final conclusions

You can buy protective glass in various places, and the final price depends on the sales channel. In official stores and large electronics chains, the margin can be as high as 200-300%, since you pay for rent and a return guarantee, here the price can go up to 1000 rubles for a simple accessory.

Marketplaces (Ozon, Wildberries, AliExpress) offer much more affordable prices. Here you can find high-quality branded glass for 300-500 rubles. The main thing is to carefully read reviews and look at buyers' photos to assess the real quality of coverage and the presence of a black frame.

To sum up, the protective glass on the Xiaomi Redmi 9 Pro is a necessary investment, given the cost of replacing the broken one. AMOLED-Save on this accessory, buying the cheapest options, is not worth it, as they can spoil the impression of using a smartphone.