Why broken glass on Xiaomi Redmi is not a sentence
A cracked smartphone screen is one of the most common breakdowns faced by Xiaomi Redmi owners. Even a minor scratch or chip can eventually turn into a full-fledged web of cracks, and a hit on a hard surface often leads to a complete loss of display performance. But don't panic: replacing glass with Redmi is a standard procedure that is performed in most service centers. The main thing is to understand the nuances of repairs, so as not to overpay and run into poor-quality work.
In this article, we will discuss in detail how much it costs to replace glass on different Xiaomi Redmi models, where it is better to seek repair (official service, private workshops or self-repair), as well as give practical tips on how to save without compromising quality. Particular attention will be paid to current prices for 2026 - they can vary greatly depending on the region, phone model and type of glass (original, OEM analogue).
It is worth noting that Xiaomi Redmi is a line of budget and mid-budget smartphones, so repairs here will cost less than, for example, on the flagship Xiaomi 13 or POCO F5. However, even within the same series, prices can vary: for example, replacing glass with the Redmi Note 12 Pro+ will be more expensive than the Redmi 10A, due to differences in the design of the display and the cost of spare parts.
What depends on the cost of replacing glass on Xiaomi Redmi
The cost of a broken screen repair is not a fixed value, but it is formed from several key factors that are important to consider before carrying a phone into service.
- 📱 Smartphone model. The newer and more expensive the device, the higher the price of parts. For example, glass for the Redmi Note 13 Pro will cost 1.5-2 times more than for the Redmi. 9C.
- 🔧 Original parts from Xiaomi will cost 2-3 times more expensive than their counterparts, but guarantee perfect compatibility and long service life. OEM-Glasses (produced by the same factory as the originals, but without the brand) – the gold standard in price/quality ratio.
- 🛠️ Difficulty repairing: Some Redmi models have glass glued to a touch layer (OLED-It's a display, and it requires a complete disassembly of the module, which increases the cost of the work.
- 📍 Region and type of service: Moscow and St. Petersburg are 20 to 30 percent higher than the regions, and Xiaomi’s official service centers charge more, but they guarantee it.
- 🔄 If not only the screen, but also the plume, battery or body, is affected, the total amount will increase.
An important point: on models with AMOLED-displays (e.g., Redmi) K60 Or the Redmi Note 12 Pro.+) It's often impossible to replace only the glass, requiring a complete replacement of the display module, which is 2-3 times more expensive, and this is due to the production technology: the glass, the sensor and the matrix are soldered into a single unit!
Also, it is worth considering that some services include diagnostics (from 300 to 1000 rubles), which can reveal hidden damage, for example, after an impact, the camera plume could move away or the microphone damaged - this will increase the final price.
Average prices for Xiaomi Redmi glass replacement in 2026
Below is a table with the current prices for glass replacement for popular Xiaomi Redmi models. Data are based on the analysis of offers of service centers in Moscow, St. Petersburg and the regions of Russia. Note that prices can vary by ± 15-20% depending on the dollar rate and the availability of spare parts in stock.
| Xiaomi Redmi Model | Cost of glass (original/OEM) | Cost of work | Final price (from-to) | Notes |
|---|---|---|---|---|
| Redmi Note 13 Pro+/Pro | 6 000–8 500 ₽ / 3 500–5 000 ₽ | 2 000–3 000 ₽ | 8 000–11 500 ₽ | AMOLED-display, often requires a replacement module |
| Redmi Note 12 Pro+/Pro | 4 500–7 000 ₽ / 2 800–4 000 ₽ | 1 800–2 500 ₽ | 6 300–9 500 ₽ | On Pro+ only the module replacement |
| Redmi 12/12C | 2 500–3 800 ₽ / 1 500–2 200 ₽ | 1 200–1 800 ₽ | 3 700–5 600 ₽ | Budget models, simple glass |
| Redmi 10A/10C | 1 800–2 500 ₽ / 1 000–1 500 ₽ | 1 000–1 500 ₽ | 2 800–4 000 ₽ | The cheapest parts in the lineup |
| Redmi K60/K60 Pro | 7 000–10 000 ₽ / 4 500–6 500 ₽ | 2 500–3 500 ₽ | 9 500–13 500 ₽ | Flagship models, complex repairs |
Note that the table shows prices only for glass replacement. If you need to replace the entire display module (matrix + glass + sensor), the cost will increase by 1.5-2 times. For example, for Redmi Note 12 Pro + a complete replacement module will cost 12,000-18 000 rubles.
Many services also offer discounts when you present a check to buy a phone or if you are a regular customer. Feel free to ask about promotions - sometimes this saves up to 10-15% of the total amount.
💡
Before repairing, check if your Xiaomi Redmi has an extended warranty from the store or bank (if you bought on credit).
Where to replace glass: a comparison of options
Choosing a service to repair is always a compromise between price, quality and speed, and let’s look at the pros and cons of each option so you can make an informed decision.
1. Official Xiaomi Service Center
Pros:
- ✅ Work and parts warranty (usually 6-12 months).
- ✅ Original parts or certified OEM.
- ✅ Professional equipment and trained personnel.
Cons:
- ❌ The highest prices (20-30% more expensive than private workshops).
- ❌ Long term repair (from 3 to 7 days).
- ❌ Not all Redmi models are supported (especially old or rare).
2. Private service centres
Pros:
- ✅ Prices are 15-25% lower than official centers.
- ✅ Quick repairs (often in 1-2 hours).
- ✅ Flexibility in the selection of spare parts (you can save on analogues).
Cons:
- ❌ The risk of running into poor quality parts or unqualified craftsmen.
- ❌ The guarantee is not always given (or only for work, but not for details).
- ❌ No original parts for new models.
3. Self-substitution
Pros:
- ✅ Minimum cost (only the price of glass) + tool).
- ✅ Full control of the process.
Cons:
- ❌ High risk of damage to plumes or matrix.
- ❌ Special tools are required (dryer, suckers, mediators).
- ❌ There is no guarantee – if something goes wrong, repairs in the service will cost more.
If you decide to go to a private workshop, be sure to check:
Reviews on Yandex.Maps or Google (especially negative ones).
Photos of the work performed (see examples of your model).
Availability of a warranty card (with seal and signature).
The price of "turnkey" (sometimes cheap glass is compensated by expensive work).-->
Important: Avoid services that offer “ultra-cheap” repairs (for example, replacing glass with a Redmi Note 12 for 2,000 rubles), most likely, you will be supplied with low-quality glass that will quickly scratch or peel off.
💡
The best option for most users is a private workshop with good reviews and a 6+ month warranty, which is a balance between price and quality.
Step-by-step: how to replace glass on Xiaomi Redmi yourself
If you decide to repair yourself, follow this instruction, and we warn you that the process requires care and patience. Mistakes can lead to a complete breakdown of the phone!
You will need to work:
- 🔥 Building hair dryer (or powerful household hair dryer).
- 🧲 Suction cups for removing glass (2 pcs.).
- 📏 Plastic mediators or guitar mediators.
- 🔧 Screwdriver with a set of bits (usually) T3, T4).
- 🧴 Clay. B-7000 or similar to fixing new glass.
- 📱 New glass (check compatibility with the model!).
Step 1: Preparing the phone
Turn off Xiaomi Redmi, retrieve SIM-It's not necessary to disconnect the battery, but if you're a beginner, you better do it (risk of short circuit). Remove the back cover if it's removable (on most modern models it's glued on).
Step 2: Heating and removing broken glass
Warm up the edge of the screen with a hair dryer (~60-70°C) for 2-3 minutes. This will soften the glue. Apply the suction cups to the glass and gently pull up. Put the mediator into the gap and slowly guide it around the perimeter, separating the glass. Don't push hard, you can damage the plumes!
Step 3. Cleaning the hull
Once the glass is removed, remove the glue from the phone frame. Use a lilac-free napkin and alcohol (or a special cleaner).
Step 4: Installation of new glass
Apply a thin layer of B-7000 glue around the frame. Apply the new glass carefully, combining the speaker and camera holes. Press it and remove the excess glue. For reliability, you can put the phone under the press (for example, between two books) for 1-2 hours.
Step 5: Verification and Assembly
Connect the battery (if you've disconnected it), turn on the phone and check the sensor. If everything works, assemble the case in reverse order.
⚠️ Attention: On models with OLED-displays (e.g., Redmi) K50 or Note 12 Pro+) So, you can't replace the glass yourself without some kind of hardware, and it's bonded to the matrix, and it's going to break away, and it's going to damage the display.
What if after the replacement the glass "goes away" at the edges?
Top.-5 Mistakes in Glass Replacement and How to Avoid Them
Even experienced craftsmen sometimes make mistakes that lead to additional costs, and here are the most common mistakes and ways to prevent them:
- Use of poor-quality glue. Cheap glue will turn yellow over time or lose adhesion. Use only the B-7000, LOCA or similar professional formulations.
- Overheating the screen with a hairdryer. Temperatures above 80°C can damage the matrix or plumes. Keep the hairdryer at a distance of 5-10 cm and move it constantly.
- Pressure on the glass when installed. Pressing it hard can cause cracks or damage to the sensor. Press the glass evenly, without undue effort.
- Ignoring the plume check, the plumes may have moved or broken after impact, always test the phone before installing a new glass!
- Savings on tools. Cheap mediators or suckers often break down in the process, making it difficult to repair. Invest in a quality set.
If you are not sure of your abilities, it is better to entrust the repair to professionals. For example, replacing the glass with the Redmi Note 11 in the service will cost 3,500-5000 rubles, while self-repairing with the purchase of tools can result in the same amount (or more if something goes wrong).
⚠️ Note: Some Xiaomi Redmi models (e.g. Redmi) 9T Redmi 10: Always On Display may be missing after glass is replaced (AOD). This is because new glass doesn't always interact properly with the light sensor.
How to Save Money on Glass Replacement: 7 Ways to Work
Repairing a broken screen is always a surprise expense, but there are ways to reduce it. Here are proven savings methods that will not affect quality:
- 🛒 Buy the glass yourself. Many services charge 30 to 50 percent on parts. OEM-glass on AliExpress or in a trusted Russian store (for example, 4PDA Market, and bring it to the master.
- 📅 Look for stocks. In the run-up to the holidays (New Year's Eve, February 23, Black Friday), many services offer discounts of up to 20%. Follow the newsletters or call and ask directly.
- 🔄 Trade the old screen for a discount. Some workshops accept broken displays as a credit (especially if the matrix is intact).
- 📍 Compare prices across services. Use services like Yandex Uslugi or YouDo to find the best deal in your city.
- 🛠️ Choose. OEM The difference in quality is minimal, and the price is 30 to 40 percent lower.
- 📱 Repair it immediately. If you put off the replacement, the cracks can go further, damaging the matrix. Repairing it immediately is cheaper than repairing it sometime later".
- 💳 Pay with a cashback card. Some banks (Tinkoff, Sber, Alpha) pay back up to 5-10% for services.
Another way to save money is to have a gadget insurance policy, if you have a policy when you buy a phone (for example, at Sberbank or VTB), check if it covers mechanical damage, and sometimes the insurance pays off on the first repair.
Critical: On Redmi models with 90Hz/120Hz functionality (like the Redmi Note 12 Pro+), cheap glass may not support high refresh rates.