The Xiaomi Redmi 9C screen is one of the most vulnerable parts of the smartphone. Even a minor fall or bump can lead to cracks, chips or a complete failure of the display. If you encounter such a problem, the first question is: how much does it cost to replace the glass and where is it more profitable to do it – in an official service center, a private workshop or try it yourself?
In this article, we will analyze the current prices for glass replacement for the Redmi 9C in 2026, compare the cost in different regions of Russia, talk about the nuances of repair (for example, why it is sometimes cheaper to change the entire module, not just glass) and give tips on how to save without risk to the device.
Important: The Redmi 9C (M2006C3MG) has a non-removable glass that is soldered to the touch layer and the matrix, which means that replacing only the top glass is often technically impossible or economically inefficient.
How much does it cost to replace glass on Xiaomi Redmi 9C in 2026: a comparison of prices
The cost of repairs depends on several factors: the type of damage, the service chosen and the region, and the current price list for the Redmi 9C is provided below (updated June 2026).
| Type of repair | Official Xiaomi service | Private service centres | Self-sustaining replacement |
|---|---|---|---|
| Replacement of glass only (if possible) | Not offered. | 2 500 — 4 000 ₽ | 1 200 — 2 000 ₽ (spare + tool) |
| Replacement of the display module (glass + matrix + sensor) | 5 500 — 7 000 ₽ | 4 000 — 6 000 ₽ | 3 500 — 5 000 ₽ |
| Replacement of glass with resticing (if the matrix is intact) | Not offered. | 3 000 — 4 500 ₽ | 1 800 — 3 000 ₽ |
| Diagnosis (if the cause of the malfunction is unknown) | Free (when repaired) | 300 — 800 ₽ | — |
⚠️ Note: Official Xiaomi services almost never change only glass – they offer a replacement for the entire display module. 9C, where the glass is glued to the matrix and the sensor, and trying to separate it often causes damage to other layers.
Private workshops may offer glass reglazing, but it is risky: if the master is not experienced enough, artifacts may appear on the screen after repair (for example, divorces when pressed or broken zones of the sensor).
Why replacing only glass is often impossible: technical nuances
Xiaomi Redmi 9C is equipped with an OGS display (One Glass Solution), where the glass, touch layer and matrix are a single module.
- 🔧 Glass is not removable – it can not just be peeled off and replaced, as on old smartphones.
- 💥 Risk of damage to the matrix - when trying to separate the glass, there is a high chance of damaging the liquid crystal layer.
- 🛠️ Complexity of repair – special equipment (laminator, UV lamp) and experience are required.
For these reasons, most services offer a complete replacement of the display module, even if only the glass is damaged. This is more reliable, but also more expensive.
When can only glass be replaced?
💡 Tip: If you are offered to replace only glass for 1000-1 500 ₽, It's a cause for concern, and it's probably using cheap parts or low-quality glue, which will lead to the windows peeling off in a few months.
Where to replace glass cheaper: comparison of services
The choice of the repair site depends not only on the price, but also on the quality of spare parts, warranty and speed of work.
1. Official Xiaomi service
Pros:
- ✅ Original parts (or certified analogues).
- ✅ 6-12 months warranty.
- ✅ Diagnosis is free (if you agree to a repair).
Cons:
- ❌ Highest price: from 5,500 ₽ module).
- ❌ Long term repair (3-7 days).
- ❌ It is not always necessary to replace only glass.
2. Private service centres
Pros:
- ✅ Prices are 20-30% lower than in the official service.
- ✅ Quick repair (1-2 days, sometimes in 2-3 hours).
- ✅ The ability to replace only glass (if the master is experienced).
Cons:
- ❌ The risk of running into unscrupulous masters (use used spare parts).
- ❌ Warranty is often limited (3-6 months).
- ❌ No original parts (only analogues).
3. Self-substitution
Pros:
- ✅ Minimum cost (if you buy the parts yourself).
- ✅ You can choose a quality module (for example, OEM Or Original Pull).
Cons:
- ❌ High risk of damaging the phone (e.g. tearing off the plumes).
- ❌ Special tools are required (dryer, suckers, mediators).
- ❌ No job security.
💡
Before repairing in a private workshop, ask to show the part to be installed.Original display module for Redmi 9C markable TCL HX356QHD_DSI_VDO (If the master refuses, it is a reason to doubt the quality of the.
How to save money on glass replacement: 5 proven ways
Replacing the display is one of the most expensive procedures for a smartphone, but there are ways to reduce costs without compromising quality.
- Buy spare parts yourself. In workshops, they often charge 30-50% on the cost of the module, you can order a display on AliExpress or in trusted Russian stores (for example, MegaDetail, GSMMoscow) and bring it to the master.
- Search for promotions. Many services offer discounts for repairs (for example, when ordering through the site or by promo code).
- Compare prices. Use services like Yandex Services or 2GIS to find workshops with the best reviews and prices.
- Check the warranty. Some services give you a discount if you agree to a shorter warranty period (for example, 3 months instead of 6).
- Look at the used modules. On Avito or Yula you can find working displays from disassembled Redmi 9C at a price of 2-3 times lower than the new ones.
⚠️ Warning: When buying a used module, be sure to check it for broken pixels and sensor performance. Ask the seller to shoot a video with the display test (for example, through the Screen Test application).
No broken pixels (use the test on a monotonous background)
Sensor sensitivity (check multi-touch)
No divorces when pressed
Integrity of the plume (no breaks or oxidation)
-->
Frequent mistakes when replacing glass and how to avoid them
Even in professional services, errors occur that lead to a phone being repaired or broken, and here are the most common problems and ways to prevent them:
- 🔥 Overheating of the matrix. If you peel off the glass with a hairdryer, you can damage the liquid crystals. Solution: Use the exact temperature (not higher than 80).°C) and warm up evenly.
- 🧲 Dust gets under the glass, causes visible defects and uneven sensor performance. Solution: Clean room with vacuum cleaner.
- 🔌 Train damage, often occurs in the sloppy underdog of the module. Solution: Use plastic mediators, not metal tools.
- 💧 Poor-quality glue, which causes the glass to detach after a few months. LOCA (for example, B-7000) and UV lamp for polymerization.
If you have a pressed severance or a broken sensor area after the glass is replaced, it is a sign that the module has been installed with irregularities, in which case you should immediately contact the service for rework (if the warranty is valid).
Self-replacement of glass: step-by-step instructions
If you decide to replace the glass with your own hands, follow this instruction. ⚠️ Warning: This method is only suitable for power users! errors can cause the phone to break down completely.
Tools required:
- 🔧 Fryer (power of at least 1000 W).
- 🧲 Suction cups for glass removal.
- 📏 Plastic mediators (0.1–0.2 mm).
- 💡 UV lamp (for polymerization of glue).
- 🧴 Clay. LOCA (for example, B-7000).
- 🧻 Lilaless wipes and alcohol for cleaning.
Step-by-step process:
- Turn off the phone and remove the back cover (if it's removable).
- Warm up the screen with a hair dryer (temperature 70–80°C) for 2-3 minutes to soften the glue.
- Put suction cups on the glass and carefully separate it from the matrix, and use mediators to keep the plumes from being damaged.
- Clean the adhesive residue matrix with alcohol, make sure there's no dust on the surface.
- Apply the new glue to the matrix and apply the new glass carefully. Remove the excess glue.
- Polymerize the glue under the UV lamp for 5-10 minutes.
- Collect your phone and check the screen and sensor performance.
💡
If you're not sure about your skills, you should go to the service, and mistakes when you replace your own glass are often more expensive than repairs by professionals.