Display damage is one of the most common problems faced by owners of budget smartphones. Xiaomi Redmi 9A was no exception: despite the rugged body, the screen panel often suffers from falls or bumps. The user immediately faces the question: change the glass separately or buy a display module entirely? The cost of these works varies significantly, and the choice depends on the nature of the damage and your budget.
In this article, we will discuss the pricing of repair services, analyze the cost of original and copy parts, and weigh the risks of self-repair. The cost of repair is not only the cost of the part, but also the complexity of the work of the master, the availability of equipment and the region of circulation. Understanding these factors will help you make an informed decision and not overpay for a service that may not be economically feasible.
The Redmi 9A parts market is full of different quality offerings, and it depends on how long the phone will keep you happy with a clear picture and an accurate touchscreen after repair. Let's take a closer look at all aspects of glass replacement so you can calculate your costs accurately.
Factors affecting the final cost of repairs
The final check amount is generated at a service center or a private craftsman by several key variables, primarily the type of spare part selected. Re-glazing is a time-consuming process that requires a separator and a special glue, but it is cheaper than buying a new module, and if you decide to change the display assembly, the price will increase by 2-3 times.
The second important factor is the originality of the components, and there are original framed matrices on the market, originals without frames, quality copies (OLED) cheap LCD-The original part will ensure full compatibility and brightness, while the budget options may have distorted colors or less sensitivity of the sensor.
⚠️ Warning: When ordering services in untested workshops, always specify what part will be installed. Often, under the guise of "original" craftsmen put cheap ones. LCD-Copies, giving them away as quality parts.
The price is also affected by urgency and warranty obligations: official service centers Xiaomi charge more for work, but give a guarantee of detail and tightness of the case (if any). Private craftsmen can offer a lower price, but the risk of running into poor-quality glue or poor assembly is higher here.
Price comparison: glass gluing or module replacement?
The main dilemma in repairing a broken screen is to choose between reglazing the glass and replacing the display module completely. Pulping (replacing only the touchscreen) is only possible if the matrix is intact, there are no stains, stripes and the image does not float. This is a cheaper option, since you pay mainly for the work of the master and consumables.
Replacing the module assembly is a radical but reliable solution, and you get a virtually new screen along with the frame, making it easier to build and often improving the look of the device, but the cost of such a procedure for the Redmi 9A can be as high as 70-80% of the market price of the smartphone itself, which calls into question the economic feasibility of repairs.
Why is resticking cheaper?
Consider the approximate cost ratio in the table below so you can estimate the difference in numbers (prices are averaged and may vary):
| Type of service | Cost of spare part (copy) | Cost of work | Final price (roughly) |
|---|---|---|---|
| Glass pasting | 500 - 800 rubles. | 1000 - 1500 rubles. | 1500 - 2300 rubles. |
| Module replacement (LCD) | 1200 - 1800 rubles. | 800 - 1200 rubles. | 2000 - 3000 rubles. |
| Module replacement (OLED) | 2500 - 3500 ruble. | 800 - 1200 rubles. | 3300 - 4700 rubles. |
As you can see from the table, the difference in price between resticking and replacing with a cheap one. LCD-It's a small module, which is why many craftsmen recommend not tinkering with old glass, but installing a new module, even if it's on a budget.
The cost of original spare parts and analogues
The Xiaomi Redmi 9A parts market offers a wide range of solutions. Original displays labeled Xiaomi Original are the least common and cost the most, their main advantage is the perfect color reproduction, the correct operation of automatic brightness and the absence of “dead zones” touchscreen.
Analogues are divided into several quality categories: High Copy or High Copy copies. OEM They are often indistinguishable from the original for the average user, but stand on the 30-40% It's cheaper. LCD-Copies (often labeled Incell) have worse viewing angles and dimmer backlights, but allow you to restore the phone to work for minimal money.
- 💰 Original: full compatibility, factory color calibration, high price.
- 🔄 Quality copy: good balance of price and quality, white may vary.
- 📉 Budgetary LCD: Low resolution (sometimes), thick glass, low brightness, cheap.
When buying a part yourself for later installation, it is important to pay attention to the presence of a plume and a controller. Sometimes cheap modules come without a frame, which requires careful gluing of all the small parts from the old screen, which increases the time and cost of work.
💡
If you buy a part yourself, be sure to check the plume for cracks. Even microscopic damage to the plume can lead to the inoperability of the touchscreen or the appearance of stripes on the screen.
Self-Replacement: Is It Worth Saving?
Many users are considering replacing the glass or module on their own to save on the work of the wizard. Theoretically, for the Redmi 9A, this is possible: the design of the phone does not have complex moisture protection systems, and access to the insides is opened after removing the back cover.
For high-quality glass gluing at home, specialized equipment will be required: a separator to separate the glass from the matrix, a laminator to stick new glass and a UV lamp to polymerize the adhesive. Buying or renting such equipment for one-time repairs is not economically feasible.
⚠️ Attention: Attempting to unstick broken glass by hand (with a thread, blade) without heating and a separator in 95% of cases leads to irreversible damage to the matrix.
If you're replacing a module, you need minimal skills, you need a set of screwdrivers, a mediator and a dryer to heat the glue, and it takes 30 to 60 minutes for a beginner, and the key is to keep the plumes intact and to set the frame carefully.
☑️ What to do to replace the module
When you decide to repair yourself, you take all the risks. An assembly error can lead to dust under the screen, detachment of the frame or damage to other components of the smartphone.
Where is it better to repair: SC or private?
The choice of repair site directly affects how much it costs to replace the glass with the Xiaomi Redmi 9A and what the result will be. Official service centers (ASCs) operate strictly according to brand regulations. They use only original parts and provide an official warranty. However, their services are usually the most expensive, and the deadlines can take from several days to weeks if parts are not available.
Private workshops and home-based services offer more flexible conditions, often in front of a customer in 30-40 minutes, lower prices due to no overhead and analogue parts, and a good choice for budget models where the cost of original repairs can be unnecessarily high.
When choosing an artist, be sure to ask whether there is a warranty. A good craftsman always gives a guarantee for his work and the installed part (usually from 14 days to 3 months), No warranty is a red flag, indicating low quality of services.
💡
For a budget smartphone Redmi 9A the best choice is often a proven private workshop with a good reputation, offering the installation of a high-quality analogue with a guarantee.
The phrase “replacement of glass for 500 rubles” often means that you will be supplied with the cheapest copy of the screen, which after a month can stop responding to touch or lose brightness.
Impact of Region and Urgentness on Price
Geography plays a role in the pricing of repair services: in Moscow and St. Petersburg, the cost of renting a room and the salary of masters is higher, which is translated into a final check for the client. In regions, prices can be lower by 15-20%, but the choice of quality spare parts is often limited there.
Urgentness is also a cost-making factor: If you're willing to wait a few days for the master to order the part and complete the work as planned, it's cheaper. A repair service or an emergency check-out service always carries a premium for speed.
Seasonality is also important, as the number of broken screens (vacations, outdoor activities) has traditionally increased during summer and holidays, which can lead to temporary price increases or increased service queues.