Replacement of glass with Xiaomi Redmi 7A: prices 2026, where cheaper and how to save

The Xiaomi Redmi 7A remains one of the most popular budget smartphones even years after its release — reliable, productive and inexpensive. But like any touchscreen device, it is vulnerable to falls and scratches. Fractured glass not only spoils the appearance, but can also damage the touchscreen or damage the display module. How much will it cost to replace it in 2026? Where is it better to repair it — in official service, in a private workshop or try to cope with it yourself?

In this article, we will analyze the current prices for glass replacement for Redmi 7A in different regions of Russia, compare the cost of original and non-original spare parts, and give practical tips on how to save without risk for the phone.

Why the glass breaks on Xiaomi Redmi 7A: the main reasons

Redmi 7A glass is made of hardened oleophobic coating, but even it can't withstand heavy mechanical stress, and these are the most common causes of damage:

• 💥 Falling to a hard surface – even from a height of 50-70 cm (for example, from a table) can appear crack or “spider web.
• 📦 Pressure in your pocket or bag – keys, coins, or other items can scratch or squeez glass when stored carelessly.
• 🔥 Temperature swings – sharp cooling (for example, if the phone is brought from the cold to a warm room) sometimes leads to microcracks.
• 🛠️ Poor previous repairs – if the glass was replaced with a cheap analogue without complying with the technology, it can peel off or crack again.

It's important to understand that a crack in a glass is not just an aesthetic problem, but it can, over time, be:

• 🩹 Spread further, damaging the sensory layer (touchscreen will cease to respond to touches).
• 🔋 Provoke overheating of the screen due to violation of heat sink.
• 💧 Be the cause of moisture entering the body (even if the phone is not "drowned").

⚠️ Note: If the crack is located closer to the edge of the screen or affects the front camera/dynamics area, repairs can be more expensive.

How much does it cost to replace glass on Xiaomi Redmi 7A in 2026: a comparison of prices

The cost of repair depends on three key factors: the type of spare part (original or analogue), the region (prices in Moscow and regional centers vary by 20-30%) and the complexity of the work (sometimes you need to replace glue, clean the case of fragments, etc.).

Important: 80 percent of the time, the masters suggest replacing not only the glass, but also the touchscreen, because they're glued together, and it's possible to replace them separately, but it's more expensive because of the complexity.

Prices in the regions may differ:

• 📍 Moscow and St. Petersburg: +15-25% of the average cost (due to high rental of workshops).
• 📍 Large cities (millions): prices are close to the average on the table.
• 📍 Small towns and villages: cheaper by 10-20%, but higher risk of running into poor-quality repairs.

Official service vs private workshop: where cheaper and more reliable

Choosing between an authorized Xiaomi service center and a private workshop is always a compromise between price, speed and quality, and let’s look at the pros and cons of each option.

Official Xiaomi service

Pros:

• ✅ Work and parts warranty (usually 12 months).
• ✅ Original parts or certified analogues are used.
• ✅ Diagnosis before repair (free or for a nominal fee).

Cons:

• ❌ Prices are higher by 30-50% compared to private owners.
• ❌ Long term repair (from 3 days to a week).
• ❌ Not all centers work with models older than 2-3 years (may require a transfer to the head office).

Private workshops

Pros:

• ✅ Prices are 20 to 40 lower%.
• ✅ Quick repairs (often “while you wait” or within 1-2 hours).
• ✅ Readiness to work with non-original parts (you can save money).

Cons:

• ❌ The risk of running into poor quality details or unscrupulous masters.
• ❌ Warranty is often limited to 1-3 months (or no warranty).
• ❌ No official liability for damage (e.g. if the camera stops working after repair).

⚠️ In the official services Xiaomi glass replacement Redmi 7A It's often offered only with a touchscreen, even if the sensor is in good condition, which increases the cost of repairs to 4,000 to 6,000. ₽. Please clarify this point before agreeing on the work!

💡

Before repairing in a private workshop, ask for a spare part in the package (the original should be the Xiaomi logo or a sticker with a serial number).

Can I replace the glass with Xiaomi Redmi 7A on my own?

Replacing Redmi 7A glass on its own is possible, but it requires experience with small electronics, special tools and patience. If you have never disassembled a smartphone, it is better not to take risks - errors can lead to:

• 🔌 Damage to plumes (screen, cameras, dynamics).
• 🔥 Overheating of the battery with improper disconnection.
• 📵 Loss of touchscreen sensitivity due to poor-quality gluing.

If you do, here is the minimum set of tools and materials you will need:

Screen suction cup|Plastic mediators (2-3 pcs.)|Screwdriver. T3 and T5|Fryer-dryer|New glass + glue (LOCA or OCA)|Alcohol and wipes for cleaning|Tweezers and spatula-->

Step-by-step instruction (briefly):

1. Turn off the phone and remove it. SIM-memory-card.
2. Heat the screen edge with a hair dryer (60–80°C) to soften the glue.
3. Carefully tuck the glass with a plastic mediator, starting at the corner.
4. Disconnect the screen and touchscreen plumes (take a picture of their location!).
5. Remove the remnants of the old glue with alcohol, install a new glass and glue it.
6. Put the phone back together and check its performance.

⚠️ Attention: On Redmi 7A If you take the glass and touchscreen together, if you damage the touch layer, you'll have to buy the entire display module (priced from 3,500). ₽).

How to save money on glass replacement: 5 proven ways

Redmi 7A repairs can be done at a lower cost without sacrificing quality.

1. Buy your own parts. Workshops often charge 30 to 50 percent on the cost of parts. Order glass on AliExpress (priced from 500). ₽) or in a verified Russian store (for example, 4PDA Market).
2. Many services offer discounts on repairs of old models (for example, "replacement of glass for 1,500) ₽ 2,500 instead ₽"). Follow the promo in the social networks of the workshops.
3. Compare prices. Use services like Yell.ru or 2GIS to find workshops with the best reviews and prices in your city.
4. Give preference to combo services. Some services offer free diagnostics or discounts on glass replacement, if you repair, for example, a charging connector.
5. If the phone is warranty-free (even if it runs out soon), contact the official service - sometimes repairs are cheaper or free.

Secret Lifehack: Some workshops have a barter system, where you can exchange an old battery or other parts from the Redmi 7A for a discount of up to 20%.

💡

The biggest savings are prevention: use a high-quality protective glass (like a Spigen or Belkin) and a case with reinforced sideways, which will reduce the risk of damage if you fall by 70%.

Common Mistakes When Replacing Glass and How to Avoid Them

Even experienced craftsmen sometimes make mistakes that lead to re-repairs.

• 🔧 Use of poor-quality glue: Cheap glue will turn yellow over time, peel off or hold glass poorly — LOCA or OCA from proven brands (B-7000, T-7000).
• 🔥 Overheating when removing glass, if the temperature of the hair dryer exceeds 90°C, you can damage the plumes or the battery. Use thermoparameters 60-80°C.
• 🧲 Dust gets under glass. Even microparticles lead to bubbles or uneven fits. Work in a clean room, use antistatic wipes.
• 📱 If you forget to plug in the touchscreen plume or the cameras, you'll have to take your phone apart!

How to avoid problems:

• 🛠️ Before repairing, check out the video instructions specifically for Redmi. 7A (For example, on the YouTube channels Repair Universe or Fixez).
• 📋 Use a magnetic screw mat – so you won’t lose them and get confused when you assemble them.
• ⚡ Check the phone's health before full assembly (plug in the plumes and turn on the device).

What to do if there are problems after replacing the glass

Sometimes, after repairs, Redmi 7A owners encounter new defects, and we will discuss the most common ways to fix them:

If the problem appears immediately after repair in the workshop, do not try to fix it yourself - this may deprive you of the warranty.

⚠️ Warning: If the phone starts to run out faster after the glass is replaced, check if the battery is damaged during disassembly. 7A The battery is glued to the body, and it is easy to puncture with careless movement.

FAQ: Frequent questions about changing the glass on Xiaomi Redmi 7A