Replacement of glass with Xiaomi Redmi 6A: 2026 prices, where cheaper and how not to run into fraud

Cracked glass on Xiaomi Redmi 6A β€” The problem that many owners of this budget smartphone face is that even a minor scratch or chip can eventually turn into a web of cracks that interfere with the use of the device. But how much does it cost to return the phone to its original appearance? The answer depends on many factors: From the choice of service center to the type of glass and the complexity of the damage.

In this article, we will discuss the current prices for glass replacement for Redmi. 6A In 2026, we're going to compare the cost of official and informal services, and we're going to show you why it's sometimes more expensive to repair cheaply, and we're going to see if you can save money by replacing your own glass, and what the pitfalls are. If you have already encountered a broken screen or are just planning repairs, here you will find all the necessary information to make an informed decision.

It is worth noting that Xiaomi Redmi 6A It was released in 2018, but it remains popular with users due to its reliability and low price, but over the years, parts have become rare for it, and the cost of repairs can vary depending on the region and the availability of original parts.

1.Why is the glass on Xiaomi Redmi breaking? 6A: root-leading

Redmi glass 6A It's not very durable, it's a budget smartphone, and the manufacturer saves on screen protection:

πŸ”Ή Falling on a hard surface – even from a height of 50-70 cm (for example, from a table) can lead to cracks.

πŸ”Ή Pressure on the screen – if you sit on the phone or put a heavy object on it, the glass can burst even without visible external damage.

πŸ”Ή Temperature swings – sharp cooling (for example, if the phone is brought from the cold to a warm room) sometimes leads to microcracks.

πŸ”Ή Production defects are rare, but there are cases when the glass cracks on its own due to internal stresses in the material.

Interestingly, the sensor layer in Redmi 6A It often remains functional even when the glass is severely damaged, which means that the phone may respond to touch, but it will be inconvenient or impossible to use because of shrapnel.

⚠️ Warning: If cracks are located near the camera or speaker, over time they can damage these modules.Dust and moisture penetrate through the cracks, leading to corrosion of contacts.

2.How much does it cost to replace glass in 2026: a price comparison

The cost of repair depends on the type of glass, region and status of the service center. Below is the current price table for Xiaomi Redmi. 6A (as of June 2026):

Type of serviceCost (rupe)GuaranteeRepair time
Official Xiaomi service3 500 – 5 0006–12 months3-7 days
Authorized partner2 800 – 4 2003–6 months1-3 days
Unofficial service (original glass)2 000 – 3 5001-3 months1-2 hours
Informal service (analogue)1 200 – 2 500Absent or 1 month1 hour
Self-replacement (parts)800 – 1 800β€”2-4 hours

Prices may vary depending on the city, for example, in Moscow and St. Petersburg, repairs will cost 20-30% more than in the regions, and it is worth considering that some services charge an additional diagnostic fee (300-800 rubles), even if you refuse to repair.

⚠️ Attention: Cheap glass is often the worst light transmittance and can distort the color of the screen, and it is less durable and scratches faster.

πŸ“Š Where do you plan to repair Xiaomi Redmi? 6A?
Official service
The private master.
Independently.
I haven't decided yet.

3.Official service vs. private workshops: what to choose?

The main difference between the official Xiaomi service and private workshops is the use of original parts and compliance with technological standards. However, this does not always mean better quality of repair.

πŸ”§ Official Xiaomi service:

βœ… Work and parts warranty (usually 6-12 months).

βœ… Used original glass with factory calibration.

βœ… Professional equipment for bonding and checking leakage.

❌ It is more expensive by 30-50% compared to private.

❌ Long-term repair time (up to 7 days).

❌ Sometimes they refuse to take old models (for example, if there are no spare parts in stock).

πŸ”§ Authorized partners:

βœ… Prices are lower than in the official service, but the quality is comparable.

βœ… 3-6 month warranty.

❌ You can use non-original parts if the originals are out of order.

πŸ”§ Private workshops:

βœ… Lowest prices and quick repairs (often while you wait").

βœ… You can negotiate a discount or bonuses (for example, free diagnostics).

❌ No work guarantee or minimum (1 month).

❌ Risk of running into poor quality glass or careless installation.

❌ Possible problems with tightness (dust, moisture under the screen).

πŸ”§ Self-sustaining replacement:

βœ… Minimum costs (only the cost of glass and glue).

βœ… Full control of the process.

❌ High risk of damage to plumes or matrix.

❌ Special tools are required (dryer, suckers, mediators).

❌ There is no guarantee – if something goes wrong, repairs in the service will cost more.

Important: In 2026, the original glass for Redmi 6A Many services offer "original-like" parts from third-party manufacturers (e.g. Ofilm or Biel Crystal) that are close to factory quality but are cheaper.

4. How to save on glass replacement: 5 working ways

If your budget is limited, but your phone needs to be brought back to life, use these tips:

πŸ’° 1.Look for stocks and discounts

Many services offer seasonal sales (like New Year's Eve or Black Friday) and you can also find coupons on sites like Groupon or Biglion.

πŸ’° 2. Order the glass yourself

On AliExpress or in Chinese stores (e.g. Banggood) original glass for Redmi 6A You can buy it for 800-1 200 rubles, and in Russian services it is sold 2-3 times more expensive.

πŸ’° 3. Combine repairs

If, in addition to glass, you need to replace, for example, a battery or speaker, many workshops make a discount on comprehensive repairs.

πŸ’° 4. Use used spare parts

On Avito or Yula sometimes sell work screens from disassembled Redmi. 6A It's a little bit risky, but if you're lucky, you can save money.

πŸ’° 5. Negotiate a barter.

Some craftsmen agree to pay for part parts (for example, if you have an unnecessary battery or case from another phone).

⚠️ Note: When buying glass on AliExpress, pay attention to compatibility. for Redmi 6A Only labeled modules are suitable M1804C3DG or M1804C3DH (modification).

β˜‘οΈ What to check before buying glass on AliExpress

Done: 0 / 5

5. Step-by-step instructions: how to replace glass yourself

If you decide to repair yourself, follow this instruction, remember: it is a risky process, and without experience it is easy to damage the phone permanently.

πŸ›  Essential tools:

πŸ”Ή Set of screwdrivers (cross, flat, five-pointed for Xiaomi).

πŸ”Ή Plastic mediators or guitar mediators.

πŸ”Ή Screen-take-down suction cups.

πŸ”Ή Dryer (power of at least 1000 W) or thermo-air station.

πŸ”Ή Clay. B-7000 double-sided 3M.

πŸ”Ή Alcohol and lilaless wipes for cleaning.

πŸ“Œ Step 1: Disconnect and disassemble

Turn off the phone and remove it. SIM-It's not going to be disconnected (it's soldered), but you can turn off the plume to avoid short circuits.

πŸ“Œ Step 2: Heating the screen

Dryer warm the edges of the phone for 2-3 minutes to soften the glue. Temperature should be 60-80Β°C (do not overheat, otherwise damage the matrix!).

πŸ“Œ Step 3: Removing glass

With suction cups, gently lift the glass. If it doesn't lend itself, put a mediator around the edges. Act slowly so you don't break the plumes.

πŸ“Œ Step 4: Cleaning and preparation

Remove the residue of the old glue with alcohol, check the integrity of the matrix and the plumes, if there are cracks in the matrix, it will have to be replaced, too.

πŸ“Œ Step 5: Installation of new glass

Apply a thin layer of glue B-7000 At the edges of the new glass, press it gently, and use a load (such as a book) to stick it evenly.

πŸ“Œ Step 6: Verification and Assembly

Put the plumes in, put the phone together, and check the screen, and if the sensor doesn't respond, it's possible that the plume is damaged or poorly pressed.

What if after the replacement the glass "goes away" at the edges?
This means that the glue has been applied too thick or unevenly. Solution: 1. Tuck the glass carefully and remove the excess glue. 2. Warm up with a hair dryer (40-50).Β°C) and press the load for 12-24 hours. 3 If the problem remains, use double-sided tape. 3M 467 perimeter.

πŸ’‘

Before gluing, wipe the glass and body with a degreasing agent (such as alcohol or White Spirit) to improve adhesion and prevent detachment.

6. Frequent mistakes when replacing glass and how to avoid them

Even experienced craftsmen sometimes make mistakes that lead to additional costs, and here are the most common mistakes and ways to prevent them:

❌ Overheating of the matrix

If you heat the screen too much with a hair dryer, you can damage the liquid crystals. Solution: use a temperature-adjusted thermopistol (maximum 80)Β°C) and keep it at a distance of 5 to 10 cm.

❌ Damage to plumes

The sensor and matrix plumes are very fragile, so if you hit them with a mediator, the phone will not respond to touch, so you can use plastic tools and be careful.

❌ Bad cleaning of old glue

The glue residues can cause bumps and bubbles under the new glass, solution: Clean the surface thoroughly with alcohol and a lilac-free wipe.

❌ Use of poor quality glue

Cheap glue turns yellow or loses adhesion over time. Solution: only buy proven brands (B-7000, LOCA).

❌ Incorrect installation of glass

If the glass is even shifted by 1 mm, it can lead to idle areas of the sensor.Solution: use a template or paint tape for accurate fixation.

πŸ’‘

The most common cause of a broken screen after changing the glass is damage to the sensor plume. If the phone does not respond to touch, check the integrity of the flexible cable under a microscope or a magnifier.

7. Alternative solutions: when glass replacement is not feasible

Sometimes repairs Xiaomi Redmi 6A It costs more than the phone itself, and in those cases, it's worth considering alternatives:

πŸ”„ 1. Purchase of a used phone

On Avito or Yulia, you can find Redmi. 6A in good condition for 2,500-4000 rubles - cheaper than repair in the official service.

πŸ”„ 2. Trade-in in communication salons

Some salons (such as the Messenger or MTS) accept old phones as a payment for a new one. 6A Even with a broken screen, you can get 500-1 500 rubles.

πŸ”„ 3. Use of the telephone as is"

If the cracks do not interfere with the sensor, you can stick a protective glass over the damaged one (cost 200-500 rubles), this will not solve the problem, but will protect against further destruction.

πŸ”„ 4. Sale of parts

Disassembled by Redmi 6A (battery, motherboard, camera) can be sold for 1000-2500 rubles on sites like Avito or specialized forums.

⚠️ Warning: If the phone is warranty, don’t try to repair it yourself! Xiaomi will void the warranty in case of any unauthorized interference.

FAQ: Answers to Frequent Questions

Can you replace only glass without touching the matrix?
Yes, but it depends on the type of damage. If the matrix is intact (no black spots, stripes or broken pixels), just replace the glass. However, 80 percent of the time, when the impacts are severe, the matrix suffers, so you have to change it, too.
How long does it take to replace glass in the service?
In informal workshops - 1-2 hours, in official services - 3-7 days (due to the queue and the need to order spare parts).
What is the difference between original glass and analogue?
Original glass has: πŸ”Ή Accurate fit under the body (no gaps). πŸ”Ή Best light transmission (no yellowness). πŸ”Ή Oleophobic coating (repels fat and prints). πŸ”Ή Manufacturer's warranty: Analogues are cheaper, but often worse in quality and scratch faster.
What if after the replacement the glass has moved away at the edges?
It means that the glue is not uniformly applied or the glass is not pressed well: πŸ”Ή Warm up with a hair dryer (50-60)Β°C) and press the load for 12 hours. πŸ”Ή Use a double-sided scotch 3M 467 perimeter. πŸ”Ή Contact the service for gluing (costs 500-1000 rubles).
Should the Redmi be repaired? 6A In 2026, or better, buy a new phone?
It depends on your budget and needs: πŸ”Ή If the phone suits performance, and repair will cost 1,500-2,500 rubles, it makes sense to restore. πŸ”Ή If the repair costs more than 3 000 rubles, it is more logical to consider the purchase of a new budget smartphone (for example, Redmi). 12C POCO C50). Please note that Redmi 6A It does not support modern versions of Android and many new apps.