Why is the Xiaomi Redmi 5 broken and when should it be changed?
The screen Xiaomi Redmi 5 is one of the most vulnerable points of the smartphone, despite the manufacturer's stated protection of Gorilla Glass 3. Even a slight drop from a height of 50-70 cm or hit a hard surface can lead to cracks, chips or complete destruction of glass, especially at risk owners who do not use protective films or cases with reinforced sides.
But not every crack needs immediate replacement, for example, if the damage is located on the edges of the display and does not interfere with touch control, you can temporarily do without repair, but there are critical signs that glass replacement becomes mandatory:
- 🔹 Web of cracks all over the surface – over time, glass can begin to crumble and injure your fingers.
- 🔹 The touchscreen doesn’t work in the damage zone – even a partial sensor failure makes the phone unusable.
- 🔹 Backlight seeps through cracks, creating glare and impairing visibility.
- 🔹 The glass peels off from the matrix - this can lead to dust and final breakage of the display.
It’s important to understand that Xiaomi Redmi 5Released is in 2017 and original parts are no longer being produced for it, which affects the cost of repair: some services may offer non-original windows or a complete replacement of the display module, which will cost more.
How much does it cost to replace glass on Xiaomi Redmi 5 in 2026: a comparison of prices
The cost of repairs depends on several factors: type of glass (original, OEM, copy), region, status of the service center and complexity of work. Below is the current price table for June 2026 for different replacement options.
| Type of glass/services | Moscow and the region | Regions (average price) | Self-replacement (parts) |
|---|---|---|---|
| Original glass (if available) | 3 500 – 5 000 ₽ | 3 000 – 4 200 ₽ | 2 500 – 3 800 ₽ (AliExpress) |
| OEM-glass (quality close to the original) | 2 200 – 3 500 ₽ | 1 800 – 3 000 ₽ | 1 200 – 2 000 ₽ |
| Copy (Chinese glass of medium quality) | 1 500 – 2 500 ₽ | 1 200 – 2 000 ₽ | 600 – 1 500 ₽ |
| Complete replacement of the display module (glass + matrix) | 4 000 – 6 500 ₽ | 3 500 – 5 500 ₽ | 3 000 – 4 500 ₽ |
The prices in the table are based on the work of the master, and if you decide to replace the glass yourself, the cost will decrease by 50-70%, but you will need skills and special tools (suction cup, mediator, hair dryer). AliExpress often sells glass without adhesive layer – it will have to be purchased separately (about 300-500). ₽).
⚠️ Attention: Cheap glass (up to 1,000) ₽) They often have poor light transmission and distort the colors of the display. If you care about image quality, it's best not to save money.
Where to change glass cheaper: service center vs private workshop
The choice of a repair site depends not only on the price, but also on the guarantees, speed of work and quality of spare parts.
Official Xiaomi Service Centers
Pros:
- ✅ Use original or certified parts.
- ✅ Give a guarantee of 3 to 12 months.
- ✅ Professional equipment for diagnostics.
Cons:
- ❌ The highest prices (from 3,500) ₽ glass-in-the-glass).
- ❌ Long term repair (from 3 to 7 days).
- ❌ They may refuse repairs if the phone is not warranty or the glass has been replaced before.
Private workshops
Pros:
- ✅ Prices are 20-40% lower than in official centers.
- ✅ Quick repairs (often in 1-2 hours).
- ✅ Ready to work with non-original spare parts.
Cons:
- ❌ The risk of running into poor quality glass or unqualified master.
- ❌ The warranty is not always given (or only for work, but not for spare parts).
- ❌ There is no way to verify the authenticity of the spare parts.
Self-sustaining replacement
It's only suitable for advanced users.
- 🔧 Set for disassembling smartphones (from 500) ₽).
- 🔥 Hair dryer for softening glue (you can use household glue).
- 🧲 Suction cup for removing glass (about 200) ₽).
- 📏 New glass with adhesive layer (from 600) ₽).
⚠️ Warning: If you replace yourself, you risk damaging the plumes of the display or the matrix. If you've never taken out the phones, you'd better trust the wizard.
Find out what kind of glass you will be using (original, OEM, copy)|Ask about the work guarantee and spare parts|Check the reviews about the workshop in Yandex.Maps or 2GIS|Find out if the proximity sensor and backlight will remain operational|Take a picture of your phone before repair (in case of disputes)-->
How to Save Money on Glass Replacement: 5 Ways to Work
If your budget is limited but your phone needs to be fixed, use these tips:
- Buy the glass yourself. Many workshops agree to install the part that the customer bought, so you save 30 to 50 percent on the margin.
- Service centers often offer discounts (e.g., "glass replacement" + Cleaning the phone for $1,990 ₽"). Follow the promo on the workshop sites.
- Combine the repairs. If you need to change the battery, or clean the charging connector, you need to do it all at once, because many services offer discounts on the set of works.
- Choose OEM over original. Quality difference is minimal, and price is 30-40% lower.
- Try insurance. If you have phone insurance (like when you buy on credit), check if it covers screen damage.
Another way to save money is to buy a used Xiaomi Redmi 5 with a working screen on Avito or Yula and use it as a spare parts donor. ₽, The glass and matrix will be in good condition.
💡
Before repairing, check if it's cheaper to buy a new budget smartphone. 12C worth about 8,000 ₽, Replacing the glass with Redmi 5 can cost half of that amount.
What happens if you don’t change the broken glass: the consequences
Many owners spend months walking around with a cracked screen, unaware of the hidden risks, and this is what can happen if you ignore the problem:
- 🩹 Injuries to the fingers: Sharp edges of glass can cut the skin, especially if the crack is deep.
- 📱 The cracks get moisture and dust inside, causing the contacts to corrosion and the display to fail.
- 🔋 Accelerated battery discharge: A damaged screen can put additional strain on the processor, increasing power consumption.
- 🚫 Touchscreen failure. Over time, the sensor stops responding to touches in the crack zone.
- 💸 If the matrix fails, you'll have to change the entire display module, which is 2-3 times more expensive.
In addition, broken glass spoils the appearance of the phone and reduces its cost when resold. Even if you plan to upgrade the gadget soon, it is better to replace the screen before selling - this will increase the price by 1,000 to 2,000. ₽.
Can I use a phone with cracked glass if it does not interfere?
Step-by-step: how to replace glass on Xiaomi Redmi 5 independently
If you decide to make a self-repair, follow this instruction: working time: 1-2 hours. Complexity: medium (needs accuracy).
Required tools and materials
- 🔧 Set of screwdrivers (cross, flat, Pentalobe) P2 Xiaomi-slash).
- 🔥 Dryer (power of at least 1000 W) or thermo-air station.
- 🧲 Suction cup.
- 📏 Plastic mediator or guitar mediator.
- 🧴 Isopropyl alcohol (for cleaning glue).
- 📦 New glass with adhesive layer (or glue) B-7000 separately).
- 🧤 Gloves (optional to avoid leaving prints).
Step-by-step process
- Turn off the phone and remove it. SIM-card.
- Heat the glass with a hair dryer around the perimeter for 2-3 minutes (temperature ~60-70 ° C). This will soften the glue.
- Put a suction on the glass and pull it up gently. If it doesn't, repeat the heat.
- Take the glass off with a mediator as you move around the edges. Be careful, there are plumes under the glass!
- Clean the frame of the old glue with alcohol and a napkin without pile.
- Apply a new adhesive layer (if it doesn’t come complete with glass) or remove the protective film from the adhesive on the new glass.
- Install the new glass by aligning it around the edges. Press and remove the air bubbles.
- Lock the glass with tape or strub for 1-2 hours (until the glue is grasped).
After replacing, check the touchscreen and proximity sensor, and if the screen does not respond to touch, the plume may have been damaged, in which case professional repair will be required.
⚠️ Warning: Do not use metal tools to remove glass - they can scratch the matrix. Also do not overheat the screen with a hair dryer (maximum 80).°C), otherwise damage the liquid crystal layer.
Frequent mistakes when replacing glass and how to avoid them
Even experienced craftsmen sometimes make mistakes that lead to additional costs, and here are the most common mistakes and ways to prevent them:
| Mistake. | Effects of consequences | How to avoid |
|---|---|---|
| Use of poor quality glue | The glass will fall off in a few days. | Buy B-7000 or LOCITE 406 glue |
| Overheating of the screen with a phenome | Damage to the matrix (the appearance of broken pixels) | Keep the hair dryer at a distance of 10 cm, the temperature is not higher than 80 ° C. |
| Dust falling under glass | The appearance of black dots or highlights on the screen | Work in a clean room, use a sticky roller to remove dust |
| Too much pressure in the installation | Cracks on new glass or damage to the matrix | Press the glass evenly, without effort. |
| Incorrect connection of plumes | The touchscreen or backlight doesn't work. | Take a picture of the location of the plumes before disassembly |
If the screen got worse at displaying colors or got a smudge after the change, it was probably a poor-quality glass, and then you'd have to redo the work.
💡
The most common mistake of beginners is to try to remove glass without heating, which leads to cracks in the matrix and increases the cost of repair by 2-3 times.