The broken glass on the Xiaomi Redmi Note 8 Pro is a problem that many owners of this popular smartphone face. The model, released in 2019, is still in demand thanks to the powerful Mediatek Helio G90T processor and a high-quality screen with a resolution of 2340×1080. However, the fragility of glass is its weak point: even a minor impact can lead to cracks or complete destruction of the display module.
In this article, we will look at the current prices for glass replacement in 2026, compare the cost in official and informal service centers, and also tell you whether you can save money by doing the repair yourself. We will pay special attention to the nuances: original parts vs. analogs, warranties and risks for non-professional intervention. If you are looking for a clear answer to the question “how much will it cost to repair”, below you will find a table with prices in Russia and the CIS, as well as a step-by-step guide for those who decide to repair their own hands.
Why the glass on the Redmi Note 8 Pro breaks: the main reasons
The Redmi Note 8 Pro design uses an oleophobic glass panel that is attached to the screen matrix with a thin layer of optical adhesive, which provides brightness and contrast, but makes the device vulnerable to mechanical damage.
- 📱 Falling onto a hard surface – even from a height of 50 to 70 cm (such as a table) can lead to cracks or a “web”; the corners of the screen are especially vulnerable.
- 💼 Pocket pressure: Keys, coins, or other items often cause microcracks that diverge over time.
- 🔥 Temperature swings: if the smartphone was lying in the cold, and then got into a warm room, the glass can burst due to internal stress.
- 🛠️ Poor repairs: After replacing the battery or other components, inexperienced craftsmen can damage the screen when assembled.
It is important to understand that on the Redmi Note 8 Pro, the glass and touchscreen are a single module with a matrix (as opposed to the newer models, where the glass can be replaced separately), which means that if you have serious damage, you will have to change the entire display unit, which significantly increases the cost of repair.
How much does it cost to replace glass in service centers: price comparison
The cost of repairs depends on the type of spare part (original or analogue), region and status of the service center. Below is the current price table for 2026 for Russia, Ukraine, Kazakhstan and Belarus. Note that official Xiaomi services use only original modules, while informal workshops often offer cheaper counterparts.
| Region | Official Service (original) | Informal service (analogue) | Self-replacement (part + tools) |
|---|---|---|---|
| Moscow/St. Petersburg | 8 500 — 12 000 ₽ | 4 000 — 6 500 ₽ | 3 200 — 4 800 ₽ |
| Regions of Russia (major cities) | 7 000 — 10 000 ₽ | 3 500 — 5 500 ₽ | 2 900 — 4 500 ₽ |
| Ukraine (Kiev, Odessa) | 7 000 — 9 500 ₴ | 3 000 — 5 000 ₴ | 2 500 — 4 000 ₴ |
| Kazakhstan (Almaty, Nur-Sultan) | 35 000 — 45 000 ₸ | 18 000 — 28 000 ₸ | 15 000 — 22 000 ₸ |
| Belarus (Minsk, Gomel) | 250 — 350 BYN | 120 — 200 BYN | 100 — 160 BYN |
Prices in official services include a work guarantee (usually a work guarantee). 6–12 months) and the original display module with an article MDY10-0001-0000. In informal workshops, the guarantee may not be available or limited. 1–3 Also note that some services charge extra for diagnostics (300–800 ₽) or urgent (+20–30% cost).
⚠️ Warning: If yellow spots or stains appear on the screen after the glass is replaced, this is a sign of using poor-quality optical glue.
Previous Previous post: What to Choose for Redmi Note 8 Pro
When you replace the glass, you'll be offered a choice of the original display module or its analogue, and we'll look at the pros and cons of each option.
Original Module (OEM)
- ✅ 100% compatible with smartphone hardware: no problems with touchscreen calibration or color rendering.
- ✅ Guarantee from the manufacturer (in official services).
- ✅ Oleophobic coating of high quality - fingers do not leave greasy traces.
- ❌ High price – 1.5-2 times more expensive than analogues.
- ❌ Long wait – in some regions, original parts have to be ordered on order (2-7 days).
Analogues (copies from third-party manufacturers)
- ✅ Low price - savings of up to 50%.
- ✅ Quick replacement – usually available.
- ❌ Marriage risk: possible "broken" pixels, uneven illumination or poor sensitivity of touch screen.
- ❌ Service life – analogues serve on average 20-30% less than the original.
- ❌ Color reproduction may vary (often colder tones).
If you have a budget, you can look at the analogues from proven brands like Tianma or BOE, which are close in quality to the original. Avoid cheap no-name modules: they often come without oleophobic coating and with matrix defects.
💡
Before buying an analog, ask the wizard to show the spare part in the work. Pay attention to the uniformity of the backlight (whether there are dark spots on the edges) and the sensitivity of the touch screen (check the multi-touch).
Self-replacement of glass: step-by-step instructions
Replacing the glass with the Redmi Note 8 Pro at home requires patience and care. If you've never disassembled a smartphone, you'd better leave it to the professionals, but with the tools and the instructions, the process is doable.
Buy a display module (original or analogue)
Purchase a set for repair (suction cups, shoulder blades, tweezers)
Prepare a dryer or a thermo-air station (to soften the glue)
Charge your smartphone by at least 50% (to avoid turning off while working)
Make a backup copy of the data (in case of emergency situations)-->
Now let's move on to the process itself:
- Turn off your smartphone and remove it. SIM-card and memory card (if any) heat the screen edge with a dryer (temperature) ~60°C) for 2-3 minutes to soften the glue.
- With a suction cup, gently lift the glass, starting at the bottom edge, insert a plastic blade into the gap.
- Swipe around the perimeter, separating the glass from the body. Be careful - there are plumes under the screen!
- Disconnect the display plume from the motherboard (use tweezers). Remember its location or take a picture.
- Install a new display module, plug in the plume and check the operability (turn on the phone without fully collecting).
- Apply a new layer of optical adhesive (unless it is previously applied to the module) and press the glass against the body. Use clamps or heavy books to stick evenly.
- Put your smartphone back together, check the touchscreen sensitivity and no image defects.
⚠️ Warning: If the screen does not respond to touch or displays artifacts after assembly, check the density of the plume. A common mistake of beginners is insufficient pressing of the connector, which causes contacts to oxidize.
The cost of tools for one-time repairs will be about 1,000-1,500 ₽ (If you plan to repair your smartphones regularly, it makes sense to invest in quality equipment (e.g., a Quick thermo-air station). 861DW post ~5 000 ₽).
What if the screen does not turn on after replacement?
Where to buy spare parts for Redmi Note 8 Pro: trusted suppliers
When buying a display module, it is important to avoid low-quality counterfeits. Here are reliable sources of spare parts for the Redmi Note 8 Pro:
- 🌍 AliExpress: Xiaomi Original Store, HWS Mobile Parts or Digi-Flaunt Store.Look for modules with a rating of at least 4.8 and the number of reviews >100.
- 🛒 Local Markets: In Russia, it is a Communication Service, 4Service; Ukraine: Moyo.ua or Allo.ua.
- 🏭 Wholesale suppliers: ETradesupply (for workshops), RepairUniverse (international delivery).
- 📦 B/U spare parts: can be found on Avito or OLX, But the risk of getting a module with hidden defects is high.
When choosing, pay attention to:
- Article: The original module must be marked MDY10-0001-0000 or MDY10-0001-0100 (for the Gorilla Glass 5 version).
- Set: the set should be the glass itself, touchscreen, matrix and pre-applied optical glue.
- Guarantee: Reliable sellers give a guarantee of at least 6 months.
The average cost of the original module on AliExpress is 4,500–6,000 ₽ (The analogues will cost 2,500 to 3,500. ₽, Be prepared for possible calibration problems.
💡
Buy parts only from sellers with a rating above 95% and video reviews, which will reduce the risk of getting married or faked.
Frequent mistakes when replacing glass and how to avoid them
Even experienced craftsmen sometimes make mistakes that lead to re-repair, and here are the most common mistakes and ways to prevent them:
- 🔥 Screen overheating: if you use a hair dryer at maximum temperature (>80°C), damage to the matrix or plumes. Optimal mode - 60-70°C.
- 🧲 Dust in glass: work in a clean, well-lit room. Use an antistatic mat and gloves.
- 🔌 Incomplete battery shutdown: before the repair, be sure to disconnect the battery, otherwise you risk closing the fee.
- 📏 Uneven adhesion: If the glass is not pressed tight enough, bubbles will appear. Use clamps or weights. ~1 kg for 12-24 hours.
- 🎨 Ignoring calibration: After the touchscreen is replaced, calibration may be required via the engineering menu (##6484##).
Another common problem is that the glass panel detachs a few days after repair, which is due to poor-quality glue or a lack of polymerization time, so to avoid this, use the B-7000 or LOCA glue and let it dry for at least 6 hours.
If the screen flickers or spontaneously presses after replacing it, the plume is likely to be the problem. Try reconnecting it or replacing it with a new one (the cost of the plume is about 800-1 200). ₽).