Xiaomi Matrix Replacement: Cost in 2026, Prices for Popular Models and Where to Repair

A broken smartphone screen is one of the most common breakdowns faced by Xiaomi owners: If the display appears cracked, broken pixels or touchscreen stopped responding to touch, most likely, a replacement of the matrix will be required. But how much will it cost? Prices range from 1,500 to 25,000 rubles depending on the model, type of screen and place of repair.

In this article, we will discuss:

🔍 What depends on the cost of replacing the matrix on Xiaomi (model, screen type, originality of the spare part)
📊 Current prices for popular models (Redmi Note) 12, Poco X5, Xiaomi 13/14 etc.)
🔧 Where is cheaper - in the official service, a third-party center or independently
⚠️ Common errors that lead to overpayment or re-repair

Important: the matrix and touchscreen module in modern Xiaomi smartphones are often a single unit (OGS-This means that if the glass is damaged, you have to change the entire display module, which increases the cost of repair. 4X or Mi A1).

If you're not sure what's broken -- the matrix, the plume, the controller -- make sure you diagnose the device before you repair it. In 30 percent of cases, the problem isn't in the screen, it's in the connectors or the board, and changing the matrix won't help.

📊 What Xiaomi model are you repairing?

Redmi Note 10/11/12

Poco X3/X4/X5

Xiaomi 11/12/13/14

Another model

I haven't decided yet.

1. What depends on the price of replacing the matrix on Xiaomi

The cost of screen repairs is based on several key factors, and understanding these nuances can save up to 40% of your budget and avoid cheating in service centers.

The main pricing criteria:

📱 The flagship Xiaomi 14 Ultra or Mix Fold 3 will cost 3-5 times more expensive than the budget Redmi A2 POCO M6.
🔄 Screen type: AMOLED (Xiaomi 13T, Poco F5) — 30-50% more expensive than IPS (Redmi 10C). LTPO AMOLED (Adaptive frequency in Xiaomi 13 Pro – premium segment, spare parts are rare. curved screens (Xiaomi Mix 4, 12S Ultra – require special equipment to replace.
🔧 Type of spare part: Original (OEM) — 100% compatibility guarantee, but the price is 50-100% higher. Copy is cheaper, but there may be problems with color reproduction or touchscreen).
🏢 Repair site – official Xiaomi service takes 20-30% more expensive, but gives a guarantee.

Critical nuance: in 2023-2026, Xiaomi tightened control over the supply of original matrixes. Now even some authorized services install analogues, passing them off as OEM. To avoid cheating, require a part certificate or check the screen after repair using the ##3644633## test (to check color rendering).

Another hidden factor is the complexity of the disassembly. 12S Ultra matrix is glued to the frame and protected by an additional layer of sealant, which increases the cost of work by 1,000-1 500 rubles.

💡

If you are offered a Xiaomi matrix replacement for less than 2,000 rubles (for models from 2020 to 2026), most likely, they use a low-quality analog, such screens often “flake off” after 2-3 months or have dead zones at the edges.

2.Prices for replacement matrix for popular Xiaomi models (2026)

Below is a table with the current prices for screen replacement in Moscow service centers (including works and spare parts). ±For an accurate calculation, specify the model and serial number of the device.

Smartphone model	Screen type	Cost (original), ₽	Cost (analogue), ₽	Duration of repairs
Redmi Note 12 Pro+	AMOLED, 120Hz	12 000 – 14 500	7 500 – 9 000	1-2 days
Poco X5 Pro	AMOLED, 120Hz	11 000 – 13 000	6 500 – 8 000	1 day
Xiaomi 13	AMOLED, LTPO, 120 Hz	18 000 – 22 000	12 000 – 15 000	2-3 days
Xiaomi 14 Ultra	AMOLED, 2K, 120Hz	25 000 – 30 000	18 000 – 22 000	3-5 days
Redmi A2	IPS, 60 Hz.	3 500 – 4 500	2 000 – 2 800	1 day

Note: prices for bent screens (for example, in Xiaomi Mix Fold 2 or Mix 4) can reach 40 000-50,000 rubles due to the complexity of installation and shortage of spare parts.

For older devices (Redmi Note 8, Mi 9), the cost of replacing the matrix can be comparable to the price of a used phone on the market.

🔄 Buy a used smartphone of the same model in good condition (for example, on Avito or Yula).
📱 Exchange the device under the trade-in program (in the Messenger or MTS give a discount of up to 10 000) ₽ new Xiaomi).
🛠️ Trying to repair yourself (just for the sake of the IPS-screenless OGS-technology).

Why are Xiaomi’s original matrices so expensive?

Manufacturer of screens for Xiaomi – Samsung Display, BOE and Visionox - only sell parts to authorized services at fixed prices. In addition, the cost of the original matrix includes: - Logistics from China / Korea. - Customs duties (up to 20% for electronic components). - Guarantee obligations of the service center. Analogs are produced by third-party firms (most often in China), saving on quality control and testing.

3. Where is cheaper to replace the matrix: a comparison of options

The choice of the repair site directly affects the final cost, and let's look at the pros and cons of each option.

1. Official Xiaomi Service Center

✅ Pros: 6-12 months warranty for work and parts, using original matrices (but not always - check!) and following repair technology (e.g., warming up the screen to remove glue).
❌ Cons: Prices are 20 to 30 percent higher than in informal services; long repair time (up to 7 days for flagships); not all cities have authorized centers.

Informal service centres

✅ Pros: Prices are lower by 30-50% (especially if you agree to a similar one), quick repair (often in 1-2 hours), flexible conditions (for example, a discount for recalls).
❌ Cons: Risk of running into a defective part; there is no guarantee for some types of work; other components may be damaged (for example, battery plume).

3. Self-substitution

✅ Pros: Minimum cost (part price only) + Experience in repair (useful for future breakdowns).
❌ Cons: High risk of damage to the board or plumes, need special tools (suction cup, mediator, hair dryer) It is difficult to find a quality matrix (many fakes on AliExpress).

For clarity, compare the cost of replacing the matrix on the Redmi Note 12 Pro in different places:

🏢 Official service: 13,000 ₽ (Original, 12-month warranty.).
🔧 Informal service: 8,500 ₽ (analogue, 3 months warranty.).
🛠️ Self-driving: 5,000 ₽ (spare + tools, without warranty).

💡

If you choose an informal service, be sure to check reviews on Yandex.Maps or 2GIS. Pay attention to the before / after photo - they will help assess the quality of work. Services with a rating below 4.5 are better to bypass.

Step-by-step instruction: how to replace the matrix yourself

If you decide to repair yourself, follow this instruction, and we warn you that the procedure requires care and patience, and that an error can lead to a complete loss of service of the phone.

Tools required:

🔥 Dryer (power of at least 1000 W) for softening glue.
🧲 Screen suction cup.
🔪 Plastic mediators (to separate the body).
⚡ Screwdriver. PH00 and Y00 (Xiaomi screws).
🧴 Alcohol or solvent for cleaning glue.
📱 New matrix (check compatibility by model number!).

Turn off the phone and remove it. SIM-map

Make a backup of the data (in case of damage to the fee)

Charge your phone 30-50% to avoid static discharge

Prepare the workplace (clean surface, good lighting)-->

Step-by-step process:

Heat the case. Dryer warm up the edges of the screen for 2-3 minutes (temperature). ~60°C. This will soften the glue.
Remove the display. With a suction cup, raise the screen, then gently insert the mediators around the perimeter to separate the matrix from the body.
Turn off the plumes. Unscrew the screws holding the metal plate and disconnect the battery plumes and the display (use plastic tweezers!).
Install a new array. Connect the plumes to the new spare part, check the health (turn on the phone before final assembly!).
Apply new glue (e.g., build, B-7000), Press the screen and fix with rods for 1-2 hours.

Typical Beginner Mistakes:

🔋 Damage to battery plume - leads to sudden phone shutdowns.
🔌 Incorrect connection of the display plume – the screen does not turn on or flickers.
🔥 Overheating of the board with a hairdryer - can disable a memory chip or modem.

If the screen does not work after replacement, check:

The density of the plumes fit (sometimes helps to reconnect them).
Integrity of contacts on the board (possibly oxidized).
Settings in Settings → Display (sometimes the autobrightness is knocked down).

💡

Before buying a matrix on AliExpress or eBay, check the reviews about the seller. Often, under the guise of “original” parts, rebranded counterparts are sold. Pay attention to the photo of the package - the original Xiaomi matrixes have a hologram and a serial number on the box.

5. How to check the quality of the matrix replacement

Even if the screen is turned on and reacts to touch, it does not guarantee that the repair is done properly. Here are 5 tests to be performed after the replacement:

1. Color rendering check

Open a white background (for example, a blank page in the browser).
Make sure there is no yellow or blue hue (typical for cheap counterparts).
Compare it with another device (e.g., a tablet) at the same brightness settings.

2.Broken pixel test

Install the Dead Pixel Test app from Google Play.
Check the screen for uniformity of the pouring in red, green, blue and black colors.
Broken pixels look like bright dots on a dark background.

3. Touchscreen (touchscreen) check

Use the Touch Screen Test (app or online service).
Swipe your finger around the edges of the screen, there are often “dead zones”.
Check the multi-touch (simultaneous touch with 5-10 fingers).

4.A backlight test

In a dark room, shine a flashlight on the screen at an angle.
If you see uneven lighting (stripes, spots), the matrix is defective.
Check the autobrightness – the light sensor must respond to changes in light.

5.Tightness check

After assembling the phone, check if the screen is creaking when pressed.
Make sure there are no gaps between the glass and the case (dust may get there).
If the phone is no longer waterproof (for example, Xiaomi 13 Pro with a high-performance phone). IP68), avoid moisture.

If you find defects, immediately contact the service. According to the law "On protection of consumer rights" (Article 29) you have the right to free elimination of defects during the warranty period (if any).

💡

The most common problem after a matrix change is a failed proximity or illumination sensor, which is due to a misconnection of the plume or damage to it, and 80 percent of the time, reconnection helps, but sometimes a flexible cable is required to be replaced (cost). ~1 000 ₽).

6. Frequent questions about replacing the matrix with Xiaomi

🔹 Can you replace only the glass, not the entire matrix?

In most modern Xiaomi (starting with the Redmi Note 9), glass and matrix are a single module (OGS-You can't separate them without damaging them, except for the old models with a separate touch layer (like Redmi). 4X or Mi A2), where glass can be replaced separately in 1,500–3,000 ₽.

🔹 How long does it take to replace the matrix?

The term depends on the load of the service and the phone model: Budget models (Redmi) 10A, Poco M5) — 1–2 hours Mid-segment (Redmi Note 12, Poco) X5) — Flagships (Xiaomi 13, Mix Fold 2) – 1-3 days (requires an order for spare parts) In official service, the period can be extended to 5-7 days due to logistics.

🔹 Xiaomi offers a replacement matrix guarantee?

Yes, but with nuances: Official services provide a 6-12 month warranty for work and parts. Informal centers - usually 1-3 months (check before repairs); the warranty does not apply to mechanical damage (for example, if you drop your phone again); Importantly, if after repairs in an informal service there are problems (for example, the screen began to flicker), it will be difficult to return the money - you have to prove the fault of the master through examination.

🔹 Can I return my phone under warranty if the screen crashes?

No. Mechanical damage (cracks, chips, broken pixels) is not a warranty in any service center. The warranty covers only factory defects, for example: spontaneous appearance of broken pixels, detachment of the matrix without external influence, malfunction of the backlight (for example, half the screen became dull). If you bought the phone less than 14 days ago, you can try to return it under the law on consumer protection (Article 25), but only if the seller agrees to the examination and it confirms the factory marriage.

🔹 Should you repair an old Xiaomi or buy a new one?

The answer depends on the model and the cost of repair. Use a simple rule: If the cost of replacing the matrix exceeds 50% of the price of a new phone, it is better to buy a new model. A2, Poco M5) repair is justified if the cost does not exceed 3000-4000 ₽. For flagships (Xiaomi 13, Mix Fold 2) it makes sense to repair if the phone is less than 2 years in use. Example: replacing the matrix with Xiaomi 11T Pro costs 15,000 ₽, And the new Poco. F5 with similar characteristics is worth 25 000 ₽ — In this case, the repair is more profitable.

7.Alternatives to replacing the matrix: when repairs are not needed

It's not always a broken screen that needs a full replacement, and in some cases, it can be solved cheaper or even free of charge.

1. Software malfunctions

If the screen doesn’t respond to touch, but there is an image, try:

🔄 Reset the settings to factory (Settings) → The phone. → Resetting settings).
📱 Update the firmware through Settings → Updating the system.
🔧 Swipe your phone manually through Fastboot (if the sensor is completely dead, use it). OTG-mouse).

2. Problems with the plume

If the screen flickers or part of the display does not work, it may not be the display itself that is to blame, but:

Matrix plume - replacement costs 1,000-2,500 ₽.
Lighting controller (on the motherboard) - repair under a microscope (~3 000 ₽).
Connector on the board - sometimes it is enough to lose contacts (~1 500 ₽).

Interim decisions

If repairs are delayed and the phone is needed urgently:

🖱️ Connect. USB-mouse-wise OTG-Adapter (works on all Xiaomi with Android 8)+).
📺 Use wireless projection on your TV or monitor (Miracast or Google Cast).
🎧 Control your phone with a voice assistant (Google Assistant or Alice).

Warning: If rainbow stripes or vertical lines appear on the screen, this may indicate damage to the graphics chip (GPU) In this case, replacing the matrix will not help - you need to repair the motherboard (cost from 5 000). ₽).

💡

If you sell Xiaomi with a broken screen, specify the exact malfunction in the ad. Phrases like "replace the matrix" or "the sensor does not work" increase customer confidence. On Avito, these phones sell 30-50% cheaper than the market price, but find buyers quickly.

8 How to save money on replacing the matrix: 5 proven ways

Screen repair is one of the most expensive procedures for a smartphone, but there are legal ways to reduce costs.

1.Look for stocks and discounts

Xiaomi’s official services sometimes offer promotions (for example, a 20% discount on repairs when presenting a purchase check).
Some unofficial centers give a discount for a review on Yandex.Maps or bring friends.

2. Buy the parts yourself

On AliExpress or e.