If your Xiaomi smartphone (whether it’s Redmi Note 12, POCO X5 or the flagship Mi 13) has become bad at sound reproduction — wheezing, distorting the bass or even silent — most likely the speaker is to blame. The breakdown can occur due to moisture, mechanical damage or natural wear. But how much does it cost to replace it, where is better to repair and how not to run into poor-quality parts? In this article, we will analyze the current prices of 2026, compare service centers and private crafts, and give tips on how to save without compromising quality.
It is important to understand that the cost of repair depends on the model of the phone, the type of speaker (main or conversational), the originality of the spare part and the region. For example, replacing the speaker with the Xiaomi Redmi 10 will cost less than the Mi 13 Ultra, and in Moscow prices are higher than in the regions.
To avoid overpaying and get a job guarantee, read on: we collected data on popular models, compared prices in different cities and prepared a checklist on how to choose a reliable master.
How much does it cost to replace the speaker on Xiaomi: prices for models in 2026
The cost of repairs is made up of three components: the price of the spare part, the work of the master and, sometimes, diagnostics. Below are the current prices for popular models Xiaomi, Redmi and POCO (data collected by service centers in Moscow, St. Petersburg and the regions).
| Model phone | Type of speaker | Cost of spare parts (original) | Cost of spare part (analogue) | Work of the master | Total (original) | Total (analogue) |
|---|---|---|---|---|---|---|
| Xiaomi Redmi Note 12 | Basic | 1 200 — 1 500 ₽ | 400 — 700 ₽ | 800 — 1 200 ₽ | 2 000 — 2 700 ₽ | 1 200 — 1 900 ₽ |
| POCO X5 Pro | Basic | 1 500 — 1 800 ₽ | 600 — 900 ₽ | 1 000 — 1 500 ₽ | 2 500 — 3 300 ₽ | 1 600 — 2 400 ₽ |
| Xiaomi 13 Lite | Basic | 1 800 — 2 200 ₽ | 800 — 1 200 ₽ | 1 200 — 1 800 ₽ | 3 000 — 4 000 ₽ | 2 000 — 3 000 ₽ |
| Redmi 10 | Conversational | 800 — 1 000 ₽ | 300 — 500 ₽ | 600 — 1 000 ₽ | 1 400 — 2 000 ₽ | 900 — 1 500 ₽ |
| Xiaomi Mi 11 | Stereodynamics (2 units) | 3 500 — 4 500 ₽ | 1 500 — 2 000 ₽ | 1 500 — 2 000 ₽ | 5 000 — 6 500 ₽ | 3 000 — 4 000 ₽ |
As you can see from the table, the difference between the original and the non-original speaker can be as much as 2-3 times. However, the analogue is not always worse: some Chinese manufacturers (for example, Huaqin or Wingtech) supply parts of the same quality as the original, but cheaper. The main thing is to make sure that the master uses certified parts, not cheap fakes.
Also, pay attention to the type of speaker:
- 🔊 The main one (multimedia) is responsible for playing music, videos and loudspeakers, and replacing it is more expensive.
- 📞 Conversational (top) - used only for telephone conversations.
- 🎵 Stereo speakers – installed in flagship models (for example, Mi 11 or 13 Pro.
Private Master vs. Private Master: Where is Cheaper and More Reliable?
Choosing between a Xiaomi service center and a private workshop is always a compromise between price, speed and warranty, and let’s look at the pros and cons of each option.
Official Xiaomi Service (or Authorized Partners):
- ✅ Parts and work warranty (usually 6-12 months).
- ✅ Use only original details.
- ✅ Diagnosis is often free or inexpensive (300–500). ₽).
- ❌ It is more expensive by 30-50% compared to private.
- ❌ Longer repair period (from 3 days to a week).
Private workshops or electronics repair services:
- ✅ Price down 20 to 40%.
- ✅ Faster (often done in 1-2 hours).
- ✅ You can negotiate a discount or bonuses.
- ❌ The risk of getting into poor quality parts.
- ❌ Warranty is usually shorter (1-3 months) or absent.
Important: Xiaomi’s official services sometimes refuse to repair phones with signs of self-opening or damage to the case, and if you have previously tried to fix the phone yourself, this can cause a warranty repair denial.
⚠️ Note: If your phone is warranty-free, but the speaker is out of order due to your fault (for example, after a fall or water hit), the official service may refuse free repairs.
How to save on the replacement speaker: 5 proven ways
Replacing a speaker is not the most expensive procedure, but you can save money without compromising quality. Here are some ways to work:
- 🛒 Buy the parts yourself. In official services, the markup on parts can be up to 100%. Order a speaker on AliExpress, eBay or in specialty stores (for example, FixPriceService or Mobile-Defect).>). Check compatibility by model number.
- 🔧 Look for promotions and discounts. Many services offer free diagnostics or a 10-20% discount when recording online.
- 📱 Change both speakers at once (if stereo) if your phone has two speakers (like the Mi 11 or the stereo). POCO F4), Replacing one can cause a sound imbalance. Many workshops discount pair replacements.
However, be careful with self-repair: the risk of damage to the plume or motherboard is quite high. If you are not confident in your abilities, it is better to entrust the matter to a professional.
Try restarting your phone (sometimes helps with software failures)
Check the sound settings (Settings → Sound)
Clean the speaker of dust with a soft brush or compressed air
Check the phone for moisture (indicators inside the case)
Make sure the problem isn’t with headphones or Bluetooth speakers-->
Signs of a faulty speaker: how to know that it is time to go to the service?
Before you carry your phone for repair, make sure that the problem is in the dynamics.
- 🔇 No sound – the speaker is completely silent, although the volume is at maximum.
- 🔊 Wheezing and distortion – the sound is intermittent, with interference, especially at high frequencies.
- 🎵 Uneven volume – one speaker plays quieter than another (relevant for stereo systems).
- 💦 The sound appears after heating – if the speaker starts working only after the phone warms up, it’s a sign of poor contact.
- 📵 Problems only on speakerphone - if there is sound in the headphones, but not through the speaker, it is definitely in it.
If you see any of these symptoms, it's likely that the speaker needs to be replaced, but sometimes the problem is the plume, the audio codec, or even the firmware, so you don't have to pay for unnecessary repairs, ask the wizard to do a free diagnostic.
⚠️ Warning: If the phone fell into water or was exposed to extreme humidity, the speaker could oxidize, in which case a conventional replacement would not help - you need to clean the contacts or change the entire module.
Step-by-step: how to replace the speaker on Xiaomi yourself
If you're going to do a self-repair, follow this instruction, and we warn you that without experience, you're going to be at high risk of damaging your phone.
You'll need:
- ✅ New speaker (check compatibility with model).
- ✅ Set of screwdrivers (star, cross, flat).
- ✅ Plastic mediator or blade for opening the body.
- ✅ Hair dryer or thermoplatform (to soften glue).
- ✅ Tweezers and dust brush.
Detailed video on the dismantling of Xiaomi Redmi Note 12
Step 1 Turn off the phone and remove it. SIM-map.
Turn off the power, get the tray out for SIM-If the battery is not removable, don't try to take it out, it's dangerous.
Step 2. Heat the body with a hair dryer.
Carefully warm the edges of the phone with a hair dryer (60-80 ° C) for 2-3 minutes. This will soften the glue, and the case will be easier to open.
Step 3. Open the back cover.
Put a plastic mediator in the gap between the case and the screen and gently lead along the edge. Don't force - you can damage the plumes!
Step 4. Disconnect the battery plume.
With a screwdriver, unscrew the screws that hold the metal plate and disconnect the battery plume, which will prevent short circuit.
Step 5. Get the old speaker out.
Find the speaker (usually located at the bottom of the phone), unscrew the screws and carefully remove it. Be careful with the plume!
Step 6. Set up a new speaker.
Connect the plume of the new speaker, fix it with screws and assemble the phone in reverse order.
After assembly, check the sound. If the speaker isn't working, you may have misconnected the plume or damaged the contacts.
💡
Before assembling the phone, take a picture of the location of all the screws and plumes, which will help you not confuse them when you re-install them.
Frequent mistakes when replacing the speaker and how to avoid them
Even experienced craftsmen sometimes make mistakes that lead to re-repairs.
- 🔧 Damage to the battery plume, if you don't turn off the battery before work, you can burn the motherboard!
- 🔩 Loss or tangle of screws. Xiaomi phones use screws of different lengths. If you put a long screw in an undesignated place, you can damage the board.
- 🧲 Metallic dust hits the contacts. When screws are unscrewed, small sawdust can close the contacts. Use a magnetic mat or tweezers.
- 🔊 If the speaker is not pressed tightly, the sound will be distorted.
- 💧 Ignoring traces of moisture. If the phone is sinking, before replacing the speaker, you need to clear the board of oxidation with a special solution (for example, Contactol).
To avoid these errors, videotape the process or follow a verified guide, and if you're not sure, take the phone to the service.
💡
The most common reason for re-repair is a poorly soldered or connected speaker plume. Always check the connection before assembly!