Replacement of glass on Xiaomi Redmi: prices 2026, where cheaper and how not to run into fraud

Fractured or broken glass on Xiaomi Redmi is a problem that almost every second smartphone owner faces. Even a minor scratch can eventually turn into a web of cracks, and a hit on a hard surface can turn into a complete failure of the display. But how much does it cost to fix the situation? The cost of replacing glass varies from 1,500 to 12,000 rubles depending on the model, type of glass and the repair site.

Many users mistakenly think that replacing glass is a simple procedure that can be done for pennies, but in fact the price depends not only on the Redmi model, but also on the generation of the display (AMOLED or IPS), And the presence of the touch layer, and whether the original glass is used, for example, for flagship models like the Redmi. K60 Pro cost can exceed 10 000 rubles, while for budget Redmi A2 — not more than 2 500 rubles.

In this article, we will discuss:

- Current prices for glass replacement for popular Xiaomi Redmi models (2020-2026).

Where it is more profitable to repair: in the official Xiaomi service, a third-party center or independently.

How to distinguish the original glass from a fake and not overpay for a low-quality analogue.

Hidden risks of cheap repairs and how to avoid repeated breakdowns.

If you're already facing a problem and you're looking for specific numbers, go straight to the model price table. If you want to understand the nuances, read on.

Why does the glass on Xiaomi Redmi break more often than on other smartphones?

Xiaomi Redmi smartphones are known for their price-quality ratio, but budgets have to pay for the fragility of glass.

• 🔹 Thin glass in budget models (e.g. Redmi) 9A or Redmi A1) — The manufacturer saves on protection, using glass less than 0.5 mm thick.
• 🔹 Lack of tempering in analog glass – many non-original spare parts do not undergo heat treatment, which is why they crack from the slightest pressure.
• 🔹 Low quality glue – cheap repairs often use cheap glue, which eventually peels off, and the glass begins to “play".
• 🔹 Design features - some models (for example, Redmi Note 10 Pro) glass glued to the display, and when hit, suffers not only it, but also the matrix.

Interestingly, according to service centers, one in three Redmis comes for repairs due to a fall from a height of less than 1 meter, not only the fragility, but also the slippery body of many models.

If your smartphone is already damaged, do not delay repairs. Cracks on the glass eventually lead to dust and moisture under the display, which can disable the sensor or matrix – and this repair is already 2-3 times more expensive.

Original glass vs analogue: what to choose and how much to overpay?

When replacing glass, you will be offered a choice:

1. The original glass (OEM) — The company is manufactured in the same factories as Xiaomi, in compliance with all standards.
2. High quality analogue – glass from proven manufacturers (for example, Tianma or silk). BOE), They supply components for Xiaomi, but not under the company’s brand.

The price difference can be huge.For example, for the Redmi Note 12 Pro, the price difference can be huge.+:

• 💎 The original glass + work: 8000-10 000 rubles.
• 🔄 Analog of premium class: 5 000-7 000 rubles.
• 💰 Budget analogue: 2,500-4000 rubles.

Which option should I choose?

• ✅ Original - if the smartphone is expensive (from 30 000 rubles) and you plan to use it for a long time.
• ✅ Premium-analogue – the optimal balance of price and quality for most users.
• ❌ Budget-friendly – only if your smartphone is older than 3 years and you’re willing to put up with the worst sensor sensitivity.

⚠️ Attention! In 2023-2026, there was a rise in counterfeiting of original glass, where fraudsters put stickers with the Xiaomi logo on cheap analogues and sell them as a fake. OEM. Check the certificates from the masters!

💡

Before repairing, ask the wizard to show the glass in the package. The original must have a hologram sticker with a serial number, which can be checked on the Xiaomi website.

Cost of glass replacement on Xiaomi Redmi models (table 2026)

The following is the actual cost of glass replacement (including work) for popular models, prices are indicated for Moscow and St. Petersburg, in the regions they can be 10-20% lower.

Please note: prices may vary depending on:

• 📍 Regions are more expensive in millionaires, cheaper in small cities.
• 🔧 Difficulties of repair – for example, the Redmi Note 10S The glass is glued to the frame, which complicates the replacement.
• 🛠️ Additional services - dust cleaning, glue replacement, tightness check.

⚠️ If you are offered to replace the glass with the Redmi Note 12 Pro+ If you're going to spend 3,000 rubles, that's 100% cheating, or you're going to use a budget equivalent for the price of the original, or you're not changing the glass at all, you're going to stick a film on it.

💡

Cost of glass replacement AMOLED-displays (e.g., Redmi) K50) always higher than IPS, Due to the complexity of the disassembly and the high cost of spare parts.

Where is it cheaper to repair: official service, private master or yourself?

The choice of the repair site directly affects the final cost and quality.

1. Official Xiaomi Service Center

Pros:

• ✅ 12 months guarantee for work and spare parts.
• ✅ Only the original glass and glue.
• ✅ Diagnosis before repair (free of charge).

Cons:

• ❌ The highest prices (20-30% more expensive than private).
• ❌ Long-term repairs (3-7 days).
• ❌ Not all models are supported (e.g. Redmi). 9T may not).

2. Private service centres

Pros:

• ✅ Prices are 15-25% lower than in the official service.
• ✅ Quick repairs (1-3 hours).
• ✅ You can arrange to install your own glass.

Cons:

• ❌ The risk of running into unscrupulous masters.
• ❌ The warranty is usually 3-6 months (or not at all).
• ❌ Low-quality glue may be used.

3. Self-substitution

Pros:

• ✅ Minimum cost (only the price of glass) + tool).
• ✅ Full control of the process.

Cons:

• ❌ High risk of damaging the display or plumes.
• ❌ Special tools are needed (dryer, suckers, mediators).
• ❌ There is no guarantee – if something goes wrong, repairs in the service will cost more.

Compare the total cost for the Redmi Note 11 Pro:

• 🏢 Official service: 7000-8500 rubles.
• 🔧 Private master: 4 500-6 000 rubles.
• 🛠️ Independently: 2,500–3,500 rubles (glass) + tool).

Availability of reviews on Yandex.Maps or 2GIS|Guarantee ticket for work and spare parts|Glass used (ask to show the packaging)|Repair period (no more than 3 days for simple models)|Availability of diagnosis before and after repair-->

Step-by-step: how to replace glass on Xiaomi Redmi yourself

If you're going to make a self-repair, follow this instruction. Attention! This method is only suitable for removable glass models (e.g. Redmi). 9A, Redmi Note 10. for smartphones with glued display (e.g. Redmi) K50) Professional equipment is required.

Tools required:

• 🔥 Construction dryer (power of at least 1000 W).
• 🧲 Suction cups for removing glass (2 pcs.).
• 📏 Plastic mediators or guitar mediators.
• 🧴 Special glue for displays (e.g, LOCITE 3301).
• 🧻 Lilaless wipes and alcohol for cleaning.

Step-by-step process:

1. Heat the body. Turn the hair dryer on at 80-90.°C and warm up the edges of the screen evenly for 3-5 minutes.
2. Remove the glass. Attach the suction cups to the glass and gently pull up, insert the mediator into the gap and slowly guide them around the perimeter.
3. Clean the case. Remove the remnants of old glue from the smartphone frame with alcohol and a napkin. Be careful not to damage the plumes!
4. Install a new glass. Apply the new glue on the frame (thin layer), gently apply the glass and press it. Use a load (for example, a heavy book) for 1-2 hours for better glue.
5. After drying the glue (12-24 hours), check the sensor and the absence of air bubbles.

⚠️ Attention, if the glass moves around the edges after the replacement, or the sensor does not respond well, it means that the glue is not uniformly applied or the glass is of poor quality.

The hidden risks of cheap repairs: what is not said in the services

Many users choose the cheapest option to replace glass, unaware of the potential consequences.

• 🔋 Fast battery discharge: Cheap glass is often thinner than the original, which causes the proximity sensor to malfunction and the screen doesn't shut down when you call. This drains the battery 15-20 percent faster.
• 📱 Poor sensor sensitivity: Budget windows aren't always perfectly compatible with the display, causing dead zones or random taps.
• 💧 Moisture is introduced. Low-quality glue flakes off over time, and moisture penetrates the glass, which leads to corrosion of the contacts.
• 🔍 Color distortion: Cheap glass can be yellowish or reduce the brightness of the display by 10-15%.

How do we avoid these problems?

• 🔍 Before repair, check the reviews about the service on independent sites (for example, Otzovic or Yandex.Maps).
• 📄 Require a warranty card indicating the glass model and type of glue.
• 👁️ After repair, check the smartphone for tightness - bring the flashlight to the flashlight turned on and see if there are gaps.

If you notice any of the defects listed after the repair, return to the service immediately. Under the Consumer Protection Act, you are entitled to free elimination of the defects during the warranty period.

💡

Savings of 1,000–2,000 rubles on cheap glass can turn into repairs for 10,000–15,000 rubles if the display or motherboard fails due to poor-quality replacement.

Frequent questions about changing the glass on Xiaomi Redmi