Xiaomi Redmi 9A remains one of the most popular budget smartphones due to the ratio of price to quality. But even such a reliable device is not immune to falls — broken screen glass can become a serious problem. How much does it cost to replace it in 2026? Where better to repair — in the official service or at private craftsmen? And how not run into scammers offering “cheap” repairs with a trick?
In this article, we will discuss the current prices for replacing glass (and a whole module, if necessary), compare the cost in different regions of Russia, and give practical tips on how to save without risk to the device.
How much does it cost to replace glass on Xiaomi Redmi 9A: current prices in 2026
The cost of repair depends on whether it is damaged, just the outside glass or the entire display module (including the matrix and touchscreen). On the Redmi 9A, the glass and touch layer are glued together, so 80 percent of the time, not only the glass is affected by a strong impact, but the touchscreen is affected, which affects the final price.
Here are the average prices for Russia in June 2026:
| Type of repair | Official Xiaomi service | Authorized partner centers | Private workshops |
|---|---|---|---|
| Replace only glass (if the matrix is intact) | 2 500 — 3 800 ₽ | 2 200 — 3 500 ₽ | 1 500 — 2 800 ₽ |
| Replacement of the display module (glass + touchscreen + matrix) | 4 200 — 5 500 ₽ | 3 800 — 5 000 ₽ | 3 000 — 4 500 ₽ |
| Diagnosis (free if you agree to the repair) | 300 — 500 ₽ | 200 — 400 ₽ | 0 — 300 ₽ |
Important: Prices can vary by region, for example, in Moscow and St. Petersburg, repairs will cost 10-15% more than in the cities with a million inhabitants of the Volga region or Siberia, and some workshops charge an additional fee for urgent repairs (1-2 hours) - up to + 30% of the base cost.
Which is cheaper: replace the glass or the entire display module?
Many users wonder why the wizards are suggesting replacing the entire module, not just broken glass. It's about OGS (One Glass Solution) technology, which Xiaomi uses in budget models, where the glass, touch layer and matrix are glued together without an air gap, which makes it easier to manufacture but makes repairs more difficult.
If the impact was severe, even with the whole glass, the polarizing film or the touchscreen plume could suffer, in which case replacing one glass won't solve the problem, either the screen will work with artifacts or not respond to touch.
- 🔹 On the screen appeared colorful stripes or spots when turned on.
- 🔹 Touchscreen does not respond to part of the touch or works spontaneously.
- 🔹 Blisters or detachments are visible under the glass (meaning the adhesive base is damaged).
Critical moment: if the master offers to replace only glass at a price below 1,500 ₽, It's a reason to be wary. You're probably going to get a glass that's not good. OCA-glue that will fall off in a week or start to "float" when pressed.
💡
On the Redmi 9A, only glass replacement is justified ONLY in small cracks without damaging the touchscreen. In all other cases, it is cheaper and more reliable to install a new module.
Private workshops vs. private workshops: where is the best repair?
The choice between the official Xiaomi service and the private workshop depends on your priorities: reliability, speed or price.
Official Xiaomi service:
- ✅ Warranty for repairs from 6 months to 1 year (depending on the center).
- ✅ Use original parts or certified analogues.
- ✅ Diagnosis is free if you agree to a repair.
- ❌ Prices are 20-30% higher than those of private owners.
- ❌ queues – repairs can take 3-7 days.
Private workshops:
- ✅ Prices are lower by 30-50% (but the risk of running into a fake).
- ✅ Repairs in 1-3 hours (if spare parts are available).
- ✅ You can agree on a guarantee (usually 1-3 months).
- ❌ There is no guarantee that the original glass or module will be supplied.
- ❌ Risk of damage to other components during disassembly.
Authorized affiliate centers are the middle ground: prices are close to private owners, but there is a guarantee and quality control. To find such a center, check the list on the official Xiaomi website in the Service → Partners section.
💡
Before repairing, ask the wizard to show the part in the package.The original display module for the Redmi 9A has a hologram with a serial number and the inscription "For Xiaomi".
How to Save Money on Glass Replacement: 5 Ways to Work
If your budget is limited but your phone needs to be fixed, use these tips to reduce the cost of repairs:
- Buy the spare part yourself. On AliExpress or in Russian stores (for example, Beru, MVideo) display module for Redmi 9A It costs 2,500 to 3,500. ₽. Masters often charge a markup of 100-200% for their “own” parts.
- Search for promotions. Official services sometimes offer discounts (e.g. -20 percent for screen repairs on sales days).
- Compare prices. Use services like Yell or 2GIS to find a workshop with the best price/review ratio.
- Refuse the urgency. Emergency repairs are always more expensive. If you don't need your phone urgently, agree to a standard timeframe (3-5 days).
- Check the warranty. If the smartphone is warranty-free but the screen is your fault, some services offer preferential repairs (for example, for 50% of the cost).
Another way to save money is to replace yourself, but it's risky, because without experience, you can damage the plumes or the matrix.
- 🔧 Setting screwdrivers PH00 and T2.
- 🔥 Dryer for softening glue (power of at least 800 W).
- 🧴 Special glue OCA or LOC layer-stitch.
- 📱 New display module (cost from 2 300) ₽).
Important: If you replace yourself, you lose your phone warranty (if it's still valid) and risk losing your device, and 30 percent of the time, newcomers damage the battery plume or motherboard.
What happens if the glass is not properly glued?
How to check the quality of repair: 7 signs of good work
After replacing the glass or module, be sure to check the phone on this checklist to make sure that the repair is done qualitatively:
☑️ Post-repair checks
If at least one item is not met, demand free repair defects under the warranty. For example, poor sensitivity of the touch screen often indicates that the master has improperly connected the plume or used poor-quality glue.
Pay special attention to tightness: after repair, the phone must retain dust protection (although the Redmi 9A has a level of only IP53), you can check this by bringing the device to bright light - if dust particles are visible under the glass, the repair is performed poorly.
💡
Take a picture of the screen against a black background at maximum brightness, and you'll see even small defects, like scratches under the glass, uneven backlights, or broken pixels.
Frequent mistakes when replacing glass and how to avoid them
Even experienced craftsmen sometimes make mistakes that then add to the cost to the client, and here are the most common problems and how to prevent them:
⚠️ Warning: If the phone is discharged faster after repair, it means that the master damaged the battery plume or did not connect it tightly, this leads to increased power consumption and can disable the battery in 2-3 months.
Typical errors:
- 🔧 Display plume damage, manifested as screen flickering or vertical stripes, and to avoid this, the master must use a plastic mediator, not a metal tool.
- 🔥 Overheating of the matrix with a hairdryer.°C, the polarization layer may be damaged. Right: warm for no more than 30 seconds with interruptions.
- 🧴 Use cheap glue, and within a month, the glass will start to walk when you press it. OCA It is expensive, but it keeps it safe.
- 📱 Incorrect touchscreen calibration. After the module is replaced, reset the touch settings in the Settings menu. → System system → Additionally. → Screen calibration.
If you notice any of these problems during the warranty period, return to the shop immediately.According to the Consumer Protection Act (Article 29), you have the right to free repair of defects.