Modern Xiaomi, Redmi and POCO smartphones are high-tech devices where the display occupies almost the entire face surface, which inevitably increases the risk of damage to it when falling. Owners often face a situation where, after careless movement, the screen is covered with a web of cracks, but the sensor continues to work flawlessly. It is at this point that the natural question arises about the cost of restoring the integrity of the gadget, since the prices for repairs in 2026 have changed significantly compared to previous periods.
The cost of glass replacement depends on the technology of the matrix and the way the display module is assembled in a particular model. In the budget series Redmi and POCO glass is often glued to the frame separately from the matrix, which theoretically reduces the cost of the process, while the flagship series Xiaomi uses a complex technology AMOLED with curved edges, where replacing only glass without replacing the matrix requires professional equipment. Understanding the difference between “glass replacement” and “module replacement” is critical to assess the final cost of repair.
In this article, we will discuss in detail the pricing policy of service centers, factors affecting the final amount, and the risks that you can face when choosing an artist. You will learn why the price can vary three times and what questions you need to ask the master before starting work, so as not to overpay for a poor-quality service or not to lose the device completely.
Factors affecting the final cost of repairing the display
The first thing that determines the price is the type of matrix and the design of the display unit. In models with LCD or IPS screens, which are more common in the budget and mid-range segment, the glass and matrix are separated by an air layer or glue, which allows in some cases to conduct a repainting procedure. However, in devices with AMOLED panels that dominate the Xiaomi 13, 14 and 15 lines, as well as in the Mi and Mix series, the glass and matrix are soldered into a single non-shallable unit in the factory, which dictates its repair conditions.
The second important factor is the availability of the latest Gorilla Glass protective coating or ceramic coating in premium models, which require specific adhesive compounds and more careful handling during separation, which increases the complexity of the work of the master. In addition, the cost of original components for flagship models with high resolution and refresh rates of 120 Hz or 144 Hz is much higher than for simple 60 Hz screens.
The third aspect is the pricing policy of the service center and the parts used. Xiaomi official services often offer replacement of the entire display module assembled with a frame, which guarantees quality, but is expensive. Private workshops can offer a cheaper option - glass resticulating (OCA-lamination), but here the price will depend on the qualification of the specialist and the availability of a vacuum press and separator.
Difference Between Glass Replacement and Module Replacement
Many users confuse the two, leading to misunderstandings when communicating with the wizard. Replacing the module involves installing a new display assembled: a matrix, glass, touch-con and often already glued frame, it is the fastest and most reliable way to restore, which completely eliminates the risk of stains, dust under the glass or detachment of glue in the future.
Replacing only glass (re-sticking) is a complex process that is not available in every service: a wizard using a laser or a thin thread separates the broken glass from the entire matrix, then removes the residue of the glue and on a special machine sticks the new glass under vacuum, this method makes sense only if the matrix is 100% intact and does not even have microscopic damage.
Why is glass resticking cheaper?
It is worth noting that for screens with curved edges (Curved) AMOLED) glass resticking is virtually impossible in normal service because of the high risk of damage to the matrix when it is separated, and in such cases, even if the sensor is working, the services insist on a complete replacement of the module, because the technology is very important. 3D-glass requires a perfect fit, which cannot be provided without factory equipment.
- 🔍 Diagnostics: Checking the matrix for broken pixels and artifacts before starting work.
- 🛠 Equipment: Availability of vacuum laminator and separator for high-quality gluing.
- 💎 Materials: Use of the original glue B-7000 or T-7000 and quality glass.
Average prices for Xiaomi repairs in 2026
The smartphone repair market in 2026 is seeing a steady rise in the price of components, especially original displays. For low-end models of the Redmi Note series, the cost of replacing glass or module remains relatively affordable, while flagship models require significant investments. Below is a table with indicative prices, which can vary depending on the region and policy of a particular service center.
| Category of devices | Examples of models | Cost of glass replacement (sticking) | Cost of replacement of the module (original) |
|---|---|---|---|
| Budgetary (Redmi A/C) | Redmi 12C, Redmi A3 | 1500 - 2500 rubles. | 3000 - 4500 rubles. |
| The middle segment (Redmi Note) | Redmi Note 13, 14 Pro | 3000 - 4500 rubles. | 6000 - 9000 rubles. |
| Subflagships (POCO F/X) | POCO F5, F6, X6 Pro | 4000 - 6000 rubles. | 8000 - 12000 rubles. |
| Flagships (Xiaomi 13/14/15) | Xiaomi 14, 14 Ultra, 15 | 8000 - 12000 rubles. | 15000 - 25000 rubles. |
It's important to understand that the prices of original modules with an official warranty will always be higher than for analogues or restored parts. The table shows the prices for original components or high-quality copies of the OLED class. Using cheap analogues like TFT instead of AMOLED can reduce the price by half, but the picture quality and power consumption will suffer critically.
💡
Always check if it's a cost to replace the frame. Often the low price is because the wizard simply rearranges your bent frame to a new screen, which can lead to bad fit and dust.
Risks of glass gluing at home
Trying to save and replace glass on your own often ends up losing the device completely, requiring not only special tools like a separator and a laminator, but also sterile conditions, and any speck of dust that gets between the layers during the gluing process will remain there forever, creating a noticeable stain on the screen.
⚠️ Warning: When heated to separate the glass, the temperature may not be evenly distributed across the matrix, leading to yellow spots or complete failure of the display.
In addition, the use of poor-quality glue or violation of vacuum technology leads to the fact that after a few weeks, the glass can peel off at the edges or go rainbow bubbles. In the conditions of 2026, when smartphones have a high degree of IP68 moisture protection, self-repair is almost guaranteed to violate the tightness of the case.
☑️ Risk assessment of self-repair
How to Choose a Reliable Service Center
When choosing a repair site, you need to pay attention not only to the price tag posted on the site, but also to the reputation of the workshop. Good service always conducts preliminary diagnostics in your presence and shows the state of the matrix under magnification. Do they refuse to take the device into operation if they see that the matrix is damaged, or impose gluing of the knowingly broken screen?
Inquire about guarantee terms. Glass resticking is usually less guaranteed (14 to 30 days) than module replacement (3 to 12 months), because the risk of hidden defects is higher after analysis.
- 📜 License: Availability of legal status and service checks.
- ⏱ Timeline: Real time of work (replacement of the module - 1 hour, resticking - up to 3 days).
- 📦 Parts: The choice between the original and the quality copy.
⚠️ Warning: If you are promised to replace the glass on the flagship curved screen in 1 hour and at a budget price, this is a signal about the possible use of low quality materials or the lack of necessary equipment for vacuum gluing.
💡
The golden rule of repair: saving on a matrix or glue when replacing glass always comes out sideways in the form of loss of brightness, a drag or the appearance of spots after a month of operation.
The impact of the model on the complexity and cost of work
Different Xiaomi smartphone lines have design features that affect the price, such as the Xiaomi Mi Mix series or the under-screen camera models require jewellery accuracy when disassembling, since the plumes are very tightly located. A mistake of one millimeter can damage the camera plume or the main connector.
In plastic-framed models, such as many POCOs, it is easier to replace the module because the frame is less brittle. However, in glass or ceramic flagships, the risk of breaking the back cover when disassembling is high, which is also something that the wizard must consider in the risk estimate. Often, the cost is put into the potential replacement of the back cover if it is glued to the dead.
Separately, it is worth mentioning models with a polling frequency of the sensor 480 Hz and above. Their correct operation after replacement requires calibration, which can be carried out only in well-equipped services with the appropriate software. Without calibration, the touchscreen can work incorrectly or "glut".