Glass on the Xiaomi Redmi Note 7 is one of the most vulnerable parts of the smartphone. Even with careful use of cracks, chips or a complete tear of the display module can occur from a fall from a height of 50 cm or a failed impact. In 2026, the cost of repair varies from 1,200 to 6,500 rubles depending on the type of glass, region and method of replacement. But before you carry the phone to the service, it is worthwhile to figure out where it is more profitable to fix, which components to choose and whether you can save without risk to the device.
The Redmi Note 7 was released in 2019, but is still popular due to its reliable filling and affordable price. However, original parts for it are becoming scarce, and the market is filled with cheap counterparts of dubious quality. In this article, we will analyze the current prices for glass replacement in official and informal services, compare the pros and cons of different repair options, and explain how to avoid cheating when choosing a master.
Why the glass breaks on the Redmi Note 7: the weak points of the model
The Xiaomi Redmi Note 7 design has several features that increase the risk of screen damage:
- 🔹 Gorilla Glass 5 is a thin glass that protects against scratches, but does not save from impacts. When you fall on asphalt or tiles, cracks appear in 80% of cases.
- 🔹 Glue connection of the display with the frame - over time, the glue loses elasticity, and the glass can detach even with a light press.
- 🔹 Protruding camera – when falling on the back, the phone often lands on the lens, but the impact is transmitted to the entire body, including the screen.
- 🔹 Lack of official protection – unlike flagships, Redmi Note 7 does not come with a protective film or case.
According to service center statistics, 65 percent of the damage to the screen on this model is due to a fall from a height of up to 1 meter on a hard surface. Another 20 percent is cracked from pressure (for example, if you sit on your phone in your pocket), the remaining 15 percent is due to factory defects or wear of the adhesive layer.
⚠️ Warning: If the screen appears "webwebs" for no apparent reason - this may be a sign of detachment of the touch layer. In this case, the glass will need to be replaced in the next 1-2 weeks, otherwise touchscreen will cease to respond to touch.
How much does it cost to replace glass in 2026: a comparison of prices in services
The cost of repair depends on three factors: type of glass, region and status of the service center. Below is the current price table for the Xiaomi Redmi Note 7 (updated in June 2026):
| Type of glass | Official Xiaomi service | Authorized partner | Informal service | Self-sustaining replacement |
|---|---|---|---|---|
| Original (OEM) | 5 800–6 500 ₽ | 4 500–5 200 ₽ | 3 800–4 300 ₽ | 2 500–3 000 ₽* |
| Unoriginal (A+) | — | 3 200–3 800 ₽ | 2 500–3 000 ₽ | 1 200–1 800 ₽* |
| Copy (low-cost) | — | — | 1 500–2 200 ₽ | 800–1 200 ₽* |
* Price is indicated only for glass (excluding tools and glue).
- 🔧 Set of suckers and mediators - 300-500 ₽
- 🔥 Hair dryer for heating glue - 1000-2 500 ₽ (or alternatively, a household hair dryer with temperature adjustment)
- 🧴 Clay. B-7000 or similar -- 200-400 ₽
Official Xiaomi services only use original parts, but the price is 20-30% higher than that of partners. Unofficial workshops often save on glue or do not check the performance of the sensor after repair, this can lead to detachment of the glass after 1-2 months or “dead zones” on the screen.
Original vs. copy: which glass to choose for the Redmi Note 7
The difference between the original glass and its counterparts is not always obvious, but it affects the durability, sensitivity of the sensor and even the brightness of the screen.
1.Original Glass (OEM)
- ✅ Full compliance with factory parameters: color reproduction, brightness, sensitivity.
- ✅ 6-12 months warranty in the service center.
- ✅ Hot lamination (glue applied evenly, without bubbles).
❌ Cons: high price (from 5,800) ₽) and shortage - in some regions, original glass has to wait 2-3 weeks.
Non-original class A+ glass
- ✅ Prices 30-40% lower than the original.
- ✅ Quality is close to OEM: Good color reproduction, minimal sensor distortion.
- ✅ Available on most services.
❌ Cons: small differences in shades of white (may be slightly yellowish), warranty - 1-3 months.
3. Cheap copies (low-cost)
- ✅ Lowest price: from 800 ₽).
- ✅ Quick replacement (usually on the day of treatment).
❌ Cons:
- 🔸 The sensor may “glut” (miss touch or trigger spontaneously).
- 🔸 Color reproduction is often shifted to the cold or warm side.
- 🔸 Low quality glue – glass can detach after a few weeks.
💡
If you choose a non-original glass, be sure to check it for oleophobic coating (repels fingerprints). Cheap copies often don't have one - the screen will quickly get dirty.
Self-replacement of glass: step-by-step instructions
If you decide to save and change the glass yourself, prepare for the fact that the process will take 2-3 hours and require care. Mistakes in the dismantling stage can lead to damage to the plumes or matrix, in which case the repair will cost more than in the service.
You'll need:
☑️ What to do to replace Redmi Note 7 glass
Step-by-step process:
- Turn off the phone and remove it. SIM-Heat the edge of the screen with a hair dryer (60-70 temperature)°C) for 2-3 minutes to soften the glue.
- With a suction cup, gently lift the glass on one side, insert the mediator into the gap and slowly lead along the frame, separating the glass from the body.
- Remove the glass completely. Remove the glue residue from the frame and the matrix with alcohol and a napkin. Be careful not to press the matrix!
- Apply new glue to the phone's frame (thin layer, no passes). Set the new glass by aligning it in the center.
- Press the glass and remove the glue. For reliability, place the phone under a press (for example, between two books) for 1-2 hours.
⚠️ If the sensor has stopped responding to touch after replacement, check: 🔹 Is the display plume properly connected (it may have moved away during disassembly). 🔹 Is there any damage on the flexible board (scratches, tears). 🔹 Is the glass glued to the quality - air bubbles can interfere with the sensor.
What if the glass is broken but the sensor is working?
Where to replace glass cheaper: TOP-5 options
Repair prices can vary greatly in one city, and we have analyzed the offers and ranked the most profitable options for replacing glass with the Redmi Note 7:
- Xiaomi's official service is expensive, but it's reliable, 12 months warranty, original parts, right if you're warranty-worthy or you're looking for durability.
- Service centers of partners (for example, “Svyaznoy”, “MTS Service”) – prices are 15-20% lower than that of Xiaomi, but the quality is often not inferior.
- Local workshops with good reviews - you can find options from 2,500 ₽, but the risk of running into poor-quality glue or glass is higher.
- Self-replacement is the most budget-friendly method (from 1,200) ₽), But it requires skills and tools.
- Ordering through aggregators (e.g., Repair, FixPrice) – it is convenient to compare prices online, but the final cost may differ after diagnosis.
Tip: Before choosing a service, check:
- 🔍 Reviews on Yandex.Maps or 2GIS (pay attention to the latest comments).
- 📋 Guarantee – minimum period of 3 months.
- 🔧 Parts used – ask to show the glass before installation.
💡
The most profitable option is to replace non-original glass class A+ This is the balance between the price (3,200-3,800). ₽) quality.
Frequent mistakes when replacing glass and how to avoid them
Even experienced craftsmen sometimes make mistakes that lead to additional costs, and here are the most common problems and ways to prevent them:
- Display plume damage occurs when glass is not removed carefully. Avoid: use plastic mediators, not metal blades.
- Bad glue: The glass goes away after a week. How to avoid it: apply the glue evenly and use a press to fix it.
- Dust gets under the glass, leads to a cloudy screen. How to avoid: work in a clean room, use antistatic wipes.
- Glass incompatibility with the matrix - the sensor does not work or floats. How to avoid: buy glass marked "for Redmi Note 7" (not suitable from the Note 7 Pro!).
If after the repair there were stains under glass, uneven lighting or sensor is triggered spontaneously, return to the service - these are signs of poor quality work. In official centers, such defects must be eliminated under warranty.