Replacement of glass on Xiaomi Redmi 6A: prices 2026, where cheaper and how not to pay

The broken glass on the Xiaomi Redmi 6A is a problem that almost every owner of this budget smartphone faces. The model released in 2018 is still in demand due to its reliability and low price, but the fragile display module remains its weak point. In this article, we will understand how much it will cost to replace glass in 2026, where it is better to repair – in official service or from private craftsmen, and what to look for to avoid running into poor-quality repairs.

The cost of the service can vary from 800 to 3500 rubles depending on the region, the type of glass (original or analogue), and the complexity of the work. But it is important to understand that cheap repairs do not always mean profitable. For example, replacing only external glass without a touchscreen will cost less, but if the touch layer is damaged, the price will increase by 2-3 times. We collected current prices in Moscow, St. Petersburg and the regions, and also prepared a checklist that will help avoid cheating when choosing a workshop.

Why Redmi 6A is so often broken glass: design features

Smartphone Xiaomi Redmi 6A fitted 5,45-inch-screen 1440×720 (HD+), glassy 2.5D It's the shape that makes the screen vulnerable to impact, because if you fall on an angle or edge, you're more likely to crack than flat glass, and it doesn't have Gorilla Glass protection, in Redmi's budget lineup. 2018 This option was not provided for a year.

Another common cause of damage is adhesive assembly technology, where the glass, touchscreen and matrix in the Redmi 6A are glued together, so not only does the top layer suffer from a severe impact, but the sensor suffers, which makes repairs more difficult: if more expensive models (like the Redmi Note 10) can replace the glass separately, then it often requires a complete replacement of the display module.

• 🔍 Weaknesses: Screen angles and area near front camera.
• 💥 Typical damage: cracks "spider web", detachment of the touch screen, non-functioning zones of the sensor.
• ⚠️ Risk in self-repair: damage to plumes or matrix (leads to a complete replacement of the display).

If you see colored stripes or artifacts on the screen after the impact, it's a signal of damage to the matrix, in which case replacing only the glass will not help - you need a full display module, which will cost 2-3 times more.

How much does it cost to replace glass: a comparison of prices in 2026

The cost of repair depends on three key factors:

1. Type of glass - original (from Xiaomi) or analog (Chinese / Korean manufacturers).
2. The complexity of the work is the replacement of only glass or a full display module (glass + touchscreen + matrix).
3. In Moscow and St. Petersburg, prices are 20-30% higher than in the regions.

The table below shows the current prices for June 2026 (adjusted for inflation and growth in the cost of spare parts), data collected on the basis of offers from service centers and workshops from 15 cities in Russia.

Importantly, some workshops may offer "budget" repairs using used windows from other smartphones, which will cost 500-700 times. ₽, But it's fraught with problems, like sensor sensitivity, rapid new cracks, or glue detachment. We don't recommend saving on parts -- it's better to pay 300 to 500 extra. ₽ A new analogue of good quality.

⚠️ If the master offers a glass replacement for 500-600 ₽, Check if the used part is used, and often, under the guise of "new" glass, parts from disassembled phones are installed, leading to rapid re-repair.

Official service vs private workshops: where cheaper and more reliable

The choice between a Xiaomi service center and a private workshop depends on your priorities: reliability or economy.

Official Xiaomi Service Center

• ✅ Pros: Work and parts warranty (usually 12 months), original parts or certified analogues used, pre-repair diagnostics (free or 300-500 months) ₽).
• ❌ Cons: Prices are 30-50% higher than those of private owners, long repair time (3-7 days), not all centers work with outdated models (for example, in small cities).

Private workshops

• ✅ Pros: Prices are lower by 20-40%, quick repair (1-2 hours), flexible conditions (for example, replacement in front of the customer).
• ❌ Cons: Risk of running into substandard parts; warranty is often limited to 1-3 months (or no); no official diagnosis - the master may miss hidden defects.

Our advice is that if your smartphone is important for work or data storage, you should contact the official service. 6A — A spare phone and you're willing to take a chance, a private workshop with good reviews will save up to 1,000 ₽. Before repair, be sure to check:

Is there a guarantee for work and spare parts?|What glass will be installed (original / analog / b / y)|How long will it take to repair?|Is there a diagnosis before the work begins?-->

⚠️ Xiaomi’s official services often refuse to repair Redmi 6A warranty if the phone is over 3 years old (model released in 2018) - check this point in advance so you don't waste time on the trip.

Can I replace the glass with Redmi 6A?

Self-replacement of glass on Xiaomi Redmi 6A is possible, but there are high risks. The main problem is glued display module. Unlike flagship models, where glass can be separated from the touchscreen with a hairdryer and mediator, there is a great chance of damage to the sensor or plumes.

If you are planning to repair yourself, you will need:

• 🔧 Tools: hair dryer (power of at least 1000 W), plastic mediators, suction cups, tweezers, glue B-7000 or LOCA.
• 📦 Parts: new glass (price from 300) ₽ on AliExpress), double-sided tape for fixation.
• 🎥 Instructions: Video guide for disassembly specifically for Redmi 6A (For example, on the YouTube channel Repair Universe).

The process includes the following steps:

1. Heating the screen with a hairdryer to soften the glue.
2. Careful separation of glass by a mediator (risk of damage to plumes!).
3. Cleaning glue residues from the frame and touch screen.
4. Applying new glue and installing glass.
5. Drying under the press (at least 2 hours).

Even if you successfully replace it, self-repairing deprives you of warranty (if it was still in effect) and can lead to a loss of sealed housing, and if after the procedure the phone stopped recognizing touches or there were stains under glass, you will have to carry it to the service — which is an additional cost.

💡

Before self-repair, take a picture of the location of the plumes and screws on the motherboard, which will help to properly assemble the phone if you forget what and where was attached.

How to save money on glass replacement: 5 proven ways

If the budget is limited, but you need a quality repair, use these tips:

1. Many service centers offer discounts on repairs of old models (for example, "glass replacement for 990) ₽" when ordering through the site. Follow the promo on Avito Services or Yandex Maps.
2. Buy the glass yourself. Workshops often charge 30 to 50 percent on the cost of the parts. Buy the glass in advance on AliExpress (price from 300). ₽) And bring it to the master, and you save 200-400. ₽.
3. Choose the same brands as the ones you've tested. OEM-manufacturers (e.g., Tianma or BOE) Not much inferior to the original, but are 30% cheaper.
4. Combine the repairs. If you need to replace, for example, a battery or a speaker, you need to do it all in one workshop, and many people give you discounts on complex work.
5. Check reviews. On 2GIS or Google Maps, look for workshops rated above 4.5 and photos of Redmi 6A repairs in your portfolio.

Another way to save money is to exchange your phone for a used one. 6A With a cracked screen, you can sell for 1,500–2,000 ₽, and then buy a serviceable machine for 2,500-3000 ₽. It is more profitable than repairs for 2,000-3,000 ₽, If the model is satisfied with the characteristics.

💡

The most common mistake in saving is choosing the cheapest glass. ₽ They often have poor light transmission, which makes the screen dim and the sensor less responsive.

Frequent problems after glass replacement and how to avoid them

Even after a professional repair, you may have some unpleasant surprises, and here are the most common problems and their causes:

If you notice at least one of these problems after the repair, don’t take the phone – demand a rework as warranty. In official Xiaomi services, such cases are treated free of charge, and in private workshops you may need a surcharge (check in advance).

Pay special attention to leakage after replacement. If the glass is poorly glued, moisture and dust can penetrate the body, which will lead to oxidation of the contacts or break the speaker. To check the leakage, after repair, hold the phone to a bright light source — if there is a gap on the edges of the screen, demand re-adhesion.

FAQ: Answers to Frequent Questions About Replacing Glass with Redmi 6A