Broken glass on Xiaomi Redmi 9 is not just an aesthetic problem, but also a real threat to the further operation of the smartphone. LCD-So the question of how much it costs to replace the glass with the shiaomi redmi 9 becomes relevant immediately after the incident, and it's not worth putting off the task in a long box.
The cost of restoring a display module depends on many factors, including the region of circulation, the status of the service center and the type of components used. Owners of budget devices often fluctuate between a complete replacement of the module and cheaper re-painting, but it is important to understand that the savings here can be fraught with loss of tightness and brightness of the screen. Let's examine the pricing and technical details of the procedure.
The urgency of the work also affects the sum of the sum, and if you go to an authorized service center, the price will be higher, but you will get a guarantee of quality and water protection (as much as possible in the budget segment). Private workshops offer more democratic prices, but the risks of running into a poor OEM-like or disrupting the assembly technology in such places increase significantly.
It is important to note that the Xiaomi Redmi 9 is equipped with IPS-It's a 1080 x 2340 pixel array, which makes it technically difficult to replace the glass, and it's not just glued, it's integrated into a single digitizer design, and it requires specialized layer separation equipment to replace it. The complexity of the process dictates the high cost of work, which can sometimes be up to 70% of the price of a new device.
⚠️ Warning: If a crack on the screen goes from edge to center, or if you see spots that change color when you press, replacing the glass alone may not help. LCD-display and require a complete replacement of the module.
Factors Affecting the Cost of Repair
The price of a glass replacement service is not made out of air, but is made up of the cost of components and the complexity of the work performed. In the case of the Redmi 9, the key factor is the type of display. IPS-The panel, the risk of damage to the matrix when breaking off broken glass is extremely high, and the masters put this risk in the cost, because in the case of a matrix breakage during repair, the client often has to pay for a new module.
Geography also plays a role: in Moscow or St. Petersburg, renting space and salaries of qualified engineers are higher, as reflected in the check. Regional services can offer a price of 15-20% lower. In addition, the presence of original glass in the inventory of a master is rare for budget models, most often you have to wait for delivery or use quality copies, which also affects the pricing policy.
The difference between glass replacement and module replacement is a time-consuming process that requires removing broken glass from a working matrix, cleaning the glue and sticking a new one. Replacing the module is simply putting a new assembly together. For Xiaomi Redmi 9, the latter is often more profitable and reliable, as factory assembly ensures no dust and bubbles.
- 🔍 Part type: Original, high-quality copy (High Copy) or cheap counterpart.
- 🛠 Difficulty: Rewiring takes more time and skills than simply replacing a module.
- 🏢 Service status: Official centers charge more for brand and warranty, privateers for speed and flexibility.
- 💸 Urgent: Repairs “at the customer” or within an hour can cost more than a wait order 2-3 day-day.
💡
Always check whether the cost of replacing the glass includes a new frame adhesive (B-7000 or similar), saving on the adhesive layer will cause dust under the screen and detachment of the glass in a month.
Price comparison: Original vs Analogues
The range of spare parts prices for Xiaomi Redmi 9 is huge, and it is easy for an untrained user to get confused.The original glass (or module with original glass) costs the most, as it passes strict quality control at Xiaomi plants. Color reproduction, touchscreen sensitivity and oleophobic coating here will meet factory standards. The cost of such a solution can range from 2,500 to 3,500 rubles and higher, depending on the service markup.
Analogs fall into several categories. AAA or OEM copies are often visually indistinguishable from the original, but may have a slightly less bright backlight or a less resistant oleophobic coating. Their price is usually 30-40% lower than the original. There are also cheap Chinese counterparts without a brand that can disappoint with touchscreen dead zones or incorrect color reproduction, but their price is attractive at about 1000-1500 rubles.
When choosing between the original and the analogue, it is important to consider the age of the device. For the Redmi 9, which is no longer the flagship, buying an expensive original module may not be economically feasible. However, if you plan to use the phone for a long time and actively interact with the screen, the overpayment for the quality of the touchscreen is justified.
| Type of spare part | Image quality | Touchscreen work | Approximate price (ruble) |
|---|---|---|---|
| Original (Original) | Perfect, factory-like. | Instant response | 2800 - 3800 |
| Copy (OEM/High Copy) | Good, brightness 90-95% | Good, micro-delays are possible. | 1800 - 2400 |
| Budgetary analogue | Average, possible distortions | Satisfactory. | 1000 - 1500 |
| Only glass (patching) | Depends on the matrix. | Depends on the matrix. | 1200 - 1800 (work + glass) |
⚠️ Attention: Cheap analogues often lack quality oleophobic coating, which means that the screen will quickly get dirty from the fingers, and the finger will slide worse on the surface, which is especially noticeable in games.
Glass repainting technology: is the risk worth it?
Many users, when they learn the cost of replacing the module, look for ways to save money and choose to reglaze the glass, a process that is technically complex and requires a separator (a device for separating layers), a laminator (to remove air bubbles), and a UV lamp or a special glue, which is almost impossible to perform at home.
The method is to heat the display to soften the glue, and then the master with a thin string or blade cuts the broken glass, then the residue of the glue is removed with a special solution, and the matrix is glued to new glass. LCD-Redmi 9: Any improper movement or excessive pressure can cause black spots or complete inoperability of the screen.
If you do decide to repaint the service, be sure to ask if they guarantee a touchscreen after the procedure. Often services take away responsibility for the sensor if it stops responding in a week. For a budget smartphone, replacing the entire module assembled is often a more rational decision, as you get a new battery (sometimes), a new frame and a warranty for all components.
Why is the rewiring cheaper than replacing the module?
Can I replace the glass by myself?
Replacing glass on Xiaomi Redmi 9 without professional equipment is a lottery with a very low chance of success. Even if you have soldering skills and accuracy, the lack of a separator makes it impossible. Attempting to unplug the glass with a hairdryer and blade in 9 out of 10 cases ends in a crushed matrix.
However, if you choose to change the display module with your own hands, you will need a set of tools: a suction cup, a set of screwdrivers (including a cross and possibly Torx), a plastic spatula (mediator) and adhesive B-7000 or T-7000.
Before work begins, you need to completely discharge the battery or turn off its plume immediately after opening the back cover, which is critical for safety, as damage to the battery plume or short circuit can lead to fire, and also remember to warm up the edges of the case to easier remove the back cover, as it is held on the glue.
☑️ What to do to replace the module
- 🔥 Heat: Use a hair dryer or heating pad to soften the glue under the back cover.
- 🔋 Safety: First, disconnect the battery plume.
- 🧹 Cleanliness: Remove any residue of old glue from the frame before installing the new module.
Where is it better to repair: SC or private?
The choice of repair site directly affects how much you pay and how much you get. Xiaomi’s official service centers are strictly regulated, they use only original parts and provide an official warranty. However, their prices are fixed and often high, and repair times can take from 7 to 14 days if parts are not available.
Private workshops and repair shops in malls offer speed. Often the glass or module is changed in 30-60 minutes. Prices are more flexible, you can bargain, especially if you have your own parts. But the quality of the parts should be checked on the spot: turn on the phone, check the multi-touch (do the test # # #6484#), check the screen for broken pixels.
And the third option is the on-site repair, the master will come to your home or office, which is convenient, but usually more expensive because of the cost of leaving, and it's also harder to keep the cleanliness necessary to replace the glass properly without getting dust.
💡
For Redmi 9, the best choice is often proven private services with good reviews, where they can offer a high-quality copy of the module with a guarantee of 3-6 months.