How much does it cost to change the glass on Redmi 6: understand the prices and nuances
Broken glass on Xiaomi Redmi 6 is a problem that almost every owner of this budget smartphone faces. Even a minor crack can eventually lead to a complete failure of the touchscreen, and sharp shards to cut fingers. But how much will you pay for repairs in 2026? Prices range from 1,200 to 4,500 rubles, and the difference depends not only on the type of spare part, the skill of the master and even the time of year (in the pre-New Year months, the cost is often overstated).
In this article, we will not only provide the current prices, but also explain why one service asks 1,500 rubles, and another service asks 3,800 for the same service. You will learn how to distinguish the original glass from the Chinese counterpart, what hidden costs can arise during repairs, and why it is sometimes cheaper to buy a used phone than to fix an old one.
What is the cost of replacing glass with Redmi 6?
The price of repairs comes from several key factors: the type of glass being installed is the main one. Xiaomi’s original parts are more expensive but guarantee full compatibility with the display and touchscreen. Analogues (most often Chinese-made) are 30 to 50 percent cheaper, but can be worse sensitive or quickly scratched.
The second is the complexity of the work. On Redmi 6, the glass is glued to the display, so replacing it requires careful separation of the module using special equipment (for example, for example, the glass is glued to the display, LOCA-If the master works on the knee without professional tools, the risk of damaging the matrix increases significantly - and this is already an additional expense.
- 🔧 Type of glass: original (3000-4500) ₽) vs analogue (1200–2500) ₽)
- 🛠️ Replacement method: with the phone disassembly (expensive) or "live" (cheaper, but riskier)
- 📍 In Moscow and St. Petersburg, prices are 20-30% higher than in small cities
- ⏳ Urgent: Express repairs in 1-2 hours can cost 30% more
- 🛡️ Warranty: Services with a 6-12 month warranty take 10-15% more, but it is justified
Another nuance is additional work. If the fall affected not only the touchscreen, but also the plume, charging connector or microphone, the total amount can increase by 1.5-2 times. For example, replacing glass + plume will cost 3,500-5000 rubles, and if you need a soldering iron to restore contacts - even more expensive.
Comparison of prices in service centers and private workshops
Xiaomi’s official service centers in Russia are rare, and even if you find one, the Redmi 6 will hardly offer a replacement for glass, because the model is discontinued and original parts are supplied in limited quantities, and in most cases owners have to contact authorized partner services or private workshops.
The following table shows the current prices for June 2026, prices for Moscow and the Moscow region; in the regions they can vary by ±15%. Please note that some services indicate the cost only for work, without taking into account the price of glass - this point is sure to check before repair!
| Type of service | Glass (original) | Glass (analogue) | Guarantee | Duration of repairs |
|---|---|---|---|---|
| Official Partner of Xiaomi | 3 800–4 500 ₽ | 2 500–3 200 ₽ | 12 months | 2-3 days |
| Network Workshop (e.g., "Communication Service") | 3 200–4 000 ₽ | 1 800–2 500 ₽ | 6 months | 1-2 days |
| Private workshop (with reviews) | 2 800–3 500 ₽ | 1 200–2 000 ₽ | 3–6 months | 1-3 hours |
| Private Master (without warranty) | 2 500–3 000 ₽ | 900–1 500 ₽ | No. | 1 hour |
Important: some workshops may offer a “complete replacement” – glass + display module. This is true if the matrix is damaged (for example, broken pixels appeared or the backlight flashes), in which case the price will rise to 5,000-7000 rubles, but it is still cheaper than buying a new phone.
⚠️ Attention: if the master offers to replace the glass with Redmi 6 for 800-1000 rubles, this is a reason to be wary. LOCA-and after a month, the glass will start to peel off or stop responding to touch.
Previous Previous post: What to Choose for Redmi 6
The main question that plagues owners Xiaomi Redmi 6 — is it worth overpaying for the original glass or can do with an analog? The answer depends on how you use the phone. If it is a work machine that often comes in your hands, it is better not to save: the original glass will last longer and will not cause sensitivity problems.
Analogues are divided into three categories:
- 🔹 Premium analogues (e.g., from Ofilm or Tianma): the quality is similar to the original, but they cost 20-30% less.
- 🔸 Middle segment (Chinese brands) JDI, BOE): may have a lower viewing angle and a lower color reproduction, but are generally workable.
- 🔺 Budget analogues (no-name): often go without oleophobic coating (fingers slide worse), scratch quickly and can peel off.
How do you check if you've got the original installed? First, ask the workshop to provide a check showing the model of the glass. Second, after you've replaced it, pay attention to:
- 📱 Touchscreen sensitivity: the original responds to light touches, the analog may require a stronger press.
- 🌈 Color reproduction: Cheap analogues often give a cold hue or yellowness.
- 🔍 Oleophobic coating: on the original fingers slide smoothly, on the budget analogue there are greasy traces.
How to distinguish a fake for the original glass?
Step-by-step: how to save on glass replacement
If you have a budget, you can reduce the cost of repairs without sacrificing quality.
- Buy glass yourself. On AliExpress or in Russian stores (for example, MegaDetail, FixPriceService), the original touchscreen for Redmi 6 will cost 1,800-2,500 rubles, and the analogue will cost 600-1,200 rubles. Then find a master who agrees to work with your spare parts (usually it is cheaper by 30-50%).
- Look for stocks. Many services offer discounts on the repair of old Xiaomi models, for example, in the "Sotmarket" or "Eldorado Service" periodically sell at a rate of up to 30%.
- Compare reviews. On Yandex.Maps or 2GIS, look for workshops with a rating above 4.7 and read reviews about Redmi 6 specifically. Pay attention to the before/after photos, they will show the real quality of work.
- Check the final price. Some services price only the work, then add the diagnostic markup (300-500). ₽) or "additional cleaning" (200-400) ₽). Ask in advance what is included in the price.
Determine if the original or analogue will be installed|Check for a guarantee (minimum 3 months)|Ask if the diagnosis is included in the cost|See examples of the master’s work (photo/video)|Find out how long the repair will take.-->
If you decide to replace the glass yourself, consider: for Redmi 6 will require not only new glass, but also:
- 🔨 Tools: mediator, sucker, hair dryer (for heating glue), tweezers.
- 🧴 Clay: Better to take it. LOCA or B-7000 (It costs 200-400. ₽).
- 📱 Spare plumes: in case you damage the original ones during dismantling.
⚠️ Warning: if you replace the glass on Redmi 6, there is a risk of damage to the display module or battery plume. If you have never repaired your phones, it is better not to experiment - repairing the service after a failed attempt can cost 2-3 times more expensive.
Where to replace glass with Redmi 6 in Moscow, St. Petersburg and the regions
We have compiled a list of proven services in major cities where glass is replaced with Xiaomi Redmi 6 with a guarantee and without hidden markups. Prices are valid for June 2026:
Moscow and the Moscow Region
- 📍 "FixLab" (M. Baumanskaya): original — 3 500 ₽, analogue — 1 800 ₽, guarantee 12 Reviews: 4 months,9/5.
- 📍 "Repair of Phones 24" (Tulskaya): original - 3200 ₽, analogue ₽, 6-month guarantee.
- 📍 "Sotmarket Service" (VDNH): only the original - 4000 ₽, 1-year guarantee + free-diagnosis.
St. Petersburg
- 📍 "Gadget-Master" (Seni Square): original - 3 800 ₽, analogue ₽, 6-month guarantee.
- 📍 "TechnoDoctor (Pionerskaia): original - 3,300 ₽, analogue ₽, urgent repair in 2 hours (+500 ₽).
Regions (Yekaterinburg, Novosibirsk, Kazan)
- 📍 "Mobile Doctor" (Yekaterinburg, 8 March St.): original - 3 000 ₽, analogue ₽.
- 📍 "FixPrice" (Novosibirsk, Krasny Prospekt St.): only analogues - from 1,200 ₽, 3-month guarantee.
- 📍 "RepairTechno" (Kazan, Bauman St.): original - 3,500 ₽, analogue ₽, free-of-charge consultation.
For other cities, look for workshops on Yandex.Maps with a Xiaomi Repair filter and a rating above 4.5. Be sure to call in advance and check:
- 🔧 Is there a glass available for Redmi 6 (many services are custom-made).
- ⏱️ How long will it take to repair (some places will have to wait 2-3 days).
- 💳 Whether you give a guarantee for work and spare parts (minimum 3 months).
💡
Before visiting the service, take a picture of your phone’s IMEI (typing *#06#) to avoid replacing the device with a similar one, but with different “entrails”.
Frequent problems after glass replacement and how to avoid them
Even after a professional repair with Xiaomi Redmi 6, there may be problems, and here are the most common ones and ways to prevent them:
| Problem. | Reason. | How to avoid |
|---|---|---|
| Touchscreen responds poorly to touch | Poor quality analogue or poor slug | Choose a premium analogue or original, check the sensitivity immediately after the repair |
| There are broken pixels or stripes on the screen | Damage to the display module during disassembly | Contact services with equipment for accurate separation of glass (LOCA-station) |
| The glass quickly becomes covered with scratches | Lack of oleophobic coverage on budget analogue | Stick a protective film immediately after repair or choose a glass coated |
| The screen has become less bright. | Bad slurrying or dust ingress between layers | Require a re-painting under warranty |
If the phone overheats or discharges quickly after changing the glass, it may indicate damage to the battery plume or motherboard, in which case you need to return the device to the workshop immediately - self-repair will only exacerbate the problem.
⚠️ Warning: If the master refuses to give a warranty for the replacement of glass, citing the fact that "Redmi 6 is an old model", this is an excuse to look for another service.
💡
The most common mistake when replacing glass with Redmi 6 is saving on glue. Cheap glue eventually turns yellow and peels off, causing the glass to "walk" when pressed. Always specify what glue is used in the workshop!