Touchscreen is one of the most vulnerable parts of Xiaomi's smartphone. Falling on asphalt, hitting a hard surface, or even pressing hard can make it out of order: the screen stops responding to touch, floats or there are dead zones. If you're facing this problem, the first question is how much it costs to replace the sensor on the Xiaomi phone and where to do it, so as not to run into poor repairs.
The price of replacing the touchscreen varies from 1,200 to 15,000 rubles depending on the model, type of breakdown and place of repair. In official Xiaomi service centers, the cost is higher, but you get a warranty and original parts, whereas in private workshops you can save 30-50%, risking a fake.
- 🔹 Price factors – why replacing the Redmi Note 12 is cheaper than the Xiaomi 14 Ultra?
- 🔹 Official vs. informal repairs – where it is more profitable and reliable?
- 🔹 Hidden costs – what can be “imposed” in the workshop besides replacing the sensor?
- 🔹 Self-replacement – is it really possible to save money if you do it yourself?
1.What does the cost of replacing the sensor with Xiaomi depend on?
The price of the repair is not fixed, it consists of several parameters, the main one is the model of the smartphone, for example, replacing the touchscreen with a budget Redmi. 9A It will cost 1,500-2,500 rubles, while on the flagship Xiaomi 14 Pro, the price can reach up to 12,000-15,000 rubles?
The issue is the type of screen and its availability:
- 📱 Budget models (Redmi) 10A, Poco M4 Pros - they use cheap LCD-It's a little bit cheaper to replace it because parts are common.
- 📱 Mid-segment (Redmi Note 12 Pro, Xiaomi) 12T) — AMOLED-It's higher because of the complexity of disassembly and the cost of the matrix.
- 📱 Flagships (Xiaomi 13 Ultra, Mix Fold 3) - unique LTPO AMOLED-High refresh rate displays. Parts are rare and expensive.
Other factors affecting the price:
- 🔧 Type of failure: crack on glass (cheaper) vs. non-functioning sensor (more expensive if the matrix is damaged).
- 🏢 Repair site: official service (Xiaomi Service) vs. private workshop vs. spare part order and self-replacement.
- 🔄 Warranty availability: in official centers, repairs under warranty may be free of charge (if the breakdown is not the fault of the user).
⚠️ Attention: If after a fall the phone not only does not respond to touch, but does not turn on, the problem may be in the touch screen controller on the motherboard.In this case, replacing the screen will not help - you will need soldering chip (price from 3,000 to 8,000 rubles).
Prices for replacement of the sensor in 2026: a comparative table
The following is the current price list for replacing the touchscreen for popular Xiaomi models in official service centers and private workshops (prices are indicated with work, without discounts), data based on monitoring services in Moscow, St. Petersburg and the regions.
| Xiaomi model | Screen type | Official service (₽) | Private workshop (₽) | Self-sustaining replacement (₽, just a spare part) |
|---|---|---|---|---|
| Redmi 9A / 10A | LCD, 60 Hz | 2 800 – 3 500 | 1 500 – 2 200 | 800 – 1 200 |
| Redmi Note 11 / 12 | AMOLED, 90 Hz. | 5 500 – 7 000 | 3 500 – 5 000 | 2 000 – 3 000 |
| Poco X5 Pro | AMOLED, 120Hz | 7 500 – 9 000 | 4 500 – 6 000 | 2 500 – 3 500 |
| Xiaomi 13 / 13 Pro | AMOLED, 120 Hz, LTPO | 10 000 – 13 000 | 7 000 – 9 000 | 4 000 – 6 000 |
| Xiaomi Mix Fold 2/3 | Flexible AMOLED, folding | 18 000 – 25 000 | 12 000 – 18 000 | 8 000 – 12 000 |
Note that prices in the regions can vary by 10-20% in the direction of reduction (in small cities cheaper) or increase (in remote areas where parts have to be transported from afar).
💡
Before repair, check whether the cost of calibration of the sensor - after replacing the touchscreen may work incorrectly (for example, "skip" touches on the edges). In official services, this procedure is done free of charge, in private workshops can take an additional 500-1000 rubles.
3.Official service vs. private workshop: where is more profitable?
The choice between the official Xiaomi service center and the private workshop depends on your priorities: reliability and warranty or price and speed.
✅ Official Xiaomi Service Center
- ✔️ Original parts to ensure that the sensor will work like new.
- ✔️ Warranty 6-12 months for repairs (in private workshops usually 1-3 months).
- ✔️ Professional equipment - use special machines to glue the screen without bubbles.
- ✔️ Calibration and testing included in the cost.
Cons: high price (30-50% more expensive than in private workshops) and long terms (from 3 to 7 days, if there is no spare part in stock).
⚙️ Private workshop
- ✔️ The price is lower by 30-50% - you can save 2,000-5000 rubles.
- ✔️ Fast repairs – often done in 1-2 hours.
- ✔️ Flexible approach – can offer used parts or analogues cheaper.
Cons: the risk of running into a poor-quality touchscreen (for example, with poor sensitivity or “rainbow” spots in bright light), the lack of a long warranty.
⚠️ Note: Some private workshops may impose additional services, such as: 🔋 «Preventive battery replacement (even if it is OK). 🛠️ «Cleaning" connectors (cost 500-1000 rubles, although it is often useless). 🔄 «Update of firmware" (may result in a data reset) Always require a detailed check with a list of works and parts!
4.Can you replace the sensor with Xiaomi on your own?
If you have experience in electronics repair, you can replace the touchscreen with Xiaomi yourself, which will save you money on work (from 1,000 to 5,000 rubles), but you will need attention and special tools.
✅ The advantages of self-replacement
- 💰 Savings – spare parts will cost 2-3 times cheaper than repairs in the service.
- 🕒 No queues, no waiting for the master to be freed.
- 🔧 Experience – if you like to disassemble technology, it’s good practice.
❌ Cons and risks
- ⚠️ Damage to other components - with careless disassembly, you can tear plumes or damage the motherboard.
- ⚠️ Poor tightness - if you stick the screen incorrectly, dust will be clogged under it.
- ⚠️ No warranty – if something goes wrong, you’ll have to pay for a re-repair.
If you are considering a replacement, here is the minimum set of tools you will need:
Set of screwdrivers (cross, flat, Pentalobe)
Plastic mediators for disassembly
Hair dryer or thermoplatform for softening glue
Screen-take-down suction cups
New touchscreen (original or qualitative analogue)
Clay. B-7000 or double-sided tape to fix the screen
Antistatic bracelet (optional)-->
Where can I buy parts?
- 🛒 AliExpress – cheap analogues (price from 500 rubles), but the quality may be low.
- 🛒 Official dealers (e.g. Xiaomi Shop) – original parts but expensive.
- 🛒 Specialty stores (e.g. Fix-Parts, Repair-Universe) – mid-range.
What happens if the sensor is not installed correctly?
5 Hidden expenses: what else can the money be spent on?
When replacing a sensor in a workshop or service, there are often additional costs that customers are not warned about in advance.
- Diagnostics – in some services it is paid (300-800 rubles), even if you refuse to repair.
- Replacement of glue / sealant - if the screen has detached, the wizard can offer "improved" gluing for 500-1 500 rubles.
- Cleaning the phone – removal of dust from under the screen or connectors (cost 300-1000 rubles).
- Software update – sometimes after replacing the sensor, you need to flash the firmware (free in official services, paid in private ones).
- Replacement of the camera glass - if it cracked during a fall, can offer to change it "at the same time" (1000-3,000 rubles).
To avoid unexpected expenses:
- 📋 Require a preliminary estimate with a list of works and prices.
- 🔍 Check reviews about the workshop – if they often complain about “imposed” services, it is better to look for another service.
- 📸 Take a photo of the phone before repair – this will help prove that additional breakdowns appeared due to the fault of the master.
💡
The most common "divorce" in workshops is the statement that "the sensor is faulty, you need to change the entire display module." In fact, 80 percent of the time, it's enough to replace only the touchscreen (top layer), not the entire matrix.
6. Sensor replacement warranty: what covers and how not to lose?
The warranty is your insurance against defects or relapses, which is 6-12 months in official Xiaomi service centers, usually 1-3 months in private workshops, but does not cover:
- 🔨 Repeated mechanical damage (for example, if you drop your phone again).
- 💧 Moisture falling under the screen (if not sealed).
- 🔥 Overheating or short circuit due to poor installation.
To avoid losing the guarantee:
- 📄 Keep a check and a warranty card - without them, claims will not be accepted.
- 🔍 Check the sensor immediately after repair – if there are defects (incorrect touches, stains), demand reworking.
- 🚫 Do not disassemble the phone yourself – this will void the warranty.
If the warranty case occurred, but the workshop refuses to recognize it:
- Write a claim to the head of the service (the sample can be found on the Internet).
- Contact Rospotrebnadzor or the Xiaomi hotline (8-800-700-02-66).
- Leave a review on Yandex.Maps or 2GIS – often this helps to resolve the conflict.
7. Alternative ways to save on repairs
If the price of replacing the sensor seems too high, there are a few ways to reduce costs without risking the phone:
- 🔄 Exchange program Trade-In — some salons (for example, Svyaznoy, M. Video) take broken Xiaomi in the account of buying a new smartphone.
- 🛠️ OSAGO repairs – if the phone is insured, check if the policy covers screen replacement (sometimes it’s cheaper than paying out of pocket).
- 🎁 Promotions and discounts – watch out for promotions at service centers (e.g., “replace screen at 20% discount” on certain days).
- 👨🔧 Student workshops – in some cities, low-cost repair services work at technical universities (price is lower by 30-40%).
Another option is to buy a used phone instead of repairing it, like if you replace the sensor with Xiaomi. 12T It costs 8 000 rubles, you can find the same device in good condition on Avito or Yula for 12 000-15 000 rubles.
💡
If the phone is older than 3 years, replacing the sensor may not be advisable, for example, repairing the Redmi Note 8 for 4 000 rubles at a market price of 5 000 rubles is a bad investment.