Broken screen smartphone — one of the most frequent breakdowns faced by owners of Xiaomi, Redmi and POCO. Matrix (display module) is responsible not only for the display of the image, but also for touch control — if it is damaged, the phone may cease to respond to touch or not turn on. the cost of replacing the matrix varies from 1,500 to 15 000 rubles depending on the model, type of screen and the repair site.
In this article, we will discuss the current matrix replacement prices for popular Xiaomi models (including the Redmi Note). 12, POCO X5, Mi 11 We will compare the cost in official services and informal workshops, and also tell you how to save without risk to the device. AMOLED-screens that are more expensive LCD, and nuances of repair with preservation of tightness (important for models with protection) IP53/IP68).
Factors Affecting the Cost of Matrix Replacement
The cost of repair depends not only on the model of the phone, but also on a number of technical and organizational factors.
- 📱 Screen type: AMOLED (For example, in Xiaomi 13 or POCO F5) more LCD (like Redmi. 10A) 1.5-2 times due to the complexity of production.
- 🔧 Original spare part: the original matrix from Xiaomi will cost 2-3 times more expensive than the analogue (for example, from the same model). BOE or Tianma).
- 🛠️ Disassembly complexity: Models with adhesive screen mounting (for example, Redmi Note 11 Pro) require more time and tools than those where the matrix is held on latches.
- 🏢 Xiaomi official partners take 20-30% more expensive, but give a warranty of up to 1 year.
- 🔄 Additional works: Replacing glass protection, glue, plumes or dust cleaning can increase the price by 500-2000 rubles.
Important: In 2026, the prices of matrixes for Xiaomi flagships (for example, 14 Ultra) increased by 15-20% due to the shortage of components and the yuan exchange rate. A2, POCO M5) The cost remained at the level of 2023 due to mass production.
Prices for replacement matrix for popular Xiaomi models (2026)
Below is a table with the current prices for replacement of the matrix in Moscow service centers (including work and parts). The cost may vary in the regions by ± 10-15%. For accurate calculation, specify the price for the IMEI of your device - some models have different versions of screens.
| Model phone | Screen type | Cost (original), ₽ | Cost (analogue), ₽ |
|---|---|---|---|
| Xiaomi 14 / 14 Pro | AMOLED, 2K, 120Hz | 12 000 – 15 000 | 8 000 – 10 000 |
| Redmi Note 12 Pro+ 5G | AMOLED, 120Hz | 7 500 – 9 000 | 4 500 – 6 000 |
| POCO F5 Pro | AMOLED, 120Hz | 8 000 – 9 500 | 5 000 – 7 000 |
| Redmi Note 11 Pro | AMOLED, 120Hz | 6 000 – 7 500 | 3 500 – 5 000 |
| POCO X5 5G | AMOLED, 120Hz | 5 500 – 7 000 | 3 000 – 4 500 |
| Redmi 12C | LCD, 60 Hz | 2 500 – 3 500 | 1 500 – 2 500 |
⚠️ Attention: For models with IP68 (for example, Xiaomi 13T) after replacing the matrix, it is required to re-seal the case, which adds to the price of 1,000-1 500 rubles!
💡
Before repairing, check if your phone has an extended warranty from Xiaomi (such as Mi Protect), and in some cases, the replacement matrix is covered free of charge even if mechanical damage occurs.
Official service vs. informal workshops: where is cheaper?
The choice between the official Xiaomi service and the private workshop depends not only on the price, but also on the risks.
- ✅ Official service:
- ❌ Cons: The price is 30-50% higher than in informal workshops, and the queue for repairs can reach 5-7 days.
- ✅ Informal workshops:
- ❌ Cons: Risk of running into poor-quality glue, poor screen calibration or loss of features (for example, autobrightness).
💡 Tip: If you are interested in durability and preservation of all functions (for example, HDR10+ Dolby Vision, better to pay for the official service. 10A, POCO M4) The difference between the original and the analogue is minimal – you can save money.
How to check the originality of the matrix after replacement?
Replacement of the matrix: is it worth the risk?
Replacing the matrix with Xiaomi is technically possible, but it requires experience, special tools and patience.
Purchase a matrix (original or quality analogue)|Set of screwdrivers (T2, T3, T4) and plastic mediators |Fur or adhesive heating station (60-80°C)|New adhesive (e.g. B-7000 or LOCA)|Tincet and antistatic bracelet-->
📌 Step-by-step process:
- Turn off the phone and remove it. SIM-map.
- Heat the edge of the screen with a hairdryer to soften the glue.
- Carefully tuck the matrix with a plastic mediator, starting at the bottom edge.
- Disconnect the display and battery plumes (it's important not to damage!)
- Install a new matrix, connect the plumes and check the performance.
- Apply new glue and press the screen (you can use a heavy book for 1-2 hours).
⚠️ Note: If you replace yourself, you are at risk:
- 🔋 Damage the battery plume or motherboard (repair will cost 3-5 times more expensive).
- 📵 Losing sensory sensitivity due to improper connection of the plume.
- 💧 Break the tightness, which will lead to moisture getting under the screen.
🔧 Conclusion: If you do not have experience in repairing electronics, it is better to entrust the replacement of the matrix to professionals.
💡
Even if you're confident, before you replace yourself, watch the disassembly of your model on YouTube. For example, the Redmi Note 12 screen is removed differently from the POCO X3 Pro due to different plume mounts.
How to save money on replacing the matrix without risk?
There are several legal ways to reduce the cost of repairs without sacrificing quality:
- Use loyalty programs. Some service centers offer 10-15% discounts when you present a check to buy a phone or a regular customer card.
- Buy the original spare part on AliExpress or from trusted suppliers (for example, ETK or GSMMarta) and give it to the workshop - so you will pay only for the work (1 500-3 000 rubles).
- Choose good reviews, such as BOE or Samsung Display (for AMOLED) arrays that are often as good as the original, but are 30-40% cheaper.
- Renovate in low season: January-February and June-July, many workshops offer discounts of up to 20% due to reduced demand.
💰 Example of savings: Replacing the matrix on the Redmi Note 11 Pro in the official service will cost 7000 rubles (original). BOE for 3,500 rubles and give to the workshop for 2,000 rubles, the final price will be 5,500 rubles - saving 1,500 rubles with minimal risks.
💡
Before buying a matrix, check its compatibility by IMEI or serial number. For example, for the POCO F3, there are two versions of the screen - with and without DC Dimming support.
Frequent problems after matrix replacement and how to avoid them
Even after a professional repair, you may have some unpleasant surprises, and here are the most common problems and their causes:
| Problem. | Possible cause | How to avoid |
|---|---|---|
| The screen flickers or spontaneously changes brightness | Poor plume contact or faulty backlight controller | Check the connection of the plume and test the matrix before installation |
| The sensor is not working in some areas. | Damage to the sensor layer or improper calibration | Use the original plume and calibrate through Settings → Additional → Screen Calibration |
| Colors are distorted (e.g. green tint) | Poor-quality matrix or lack of factory calibration | Select matrices with DC Dimming support and check supplier reviews |
| The phone will not turn on after replacement | Short circuit when connecting the plume or discharged battery | Check the battery voltage before assembly and use an antistatic bracelet |
⚠️ Note: If the Always-On Display function has stopped working after the matrix has been replaced (for AMOLED-The only way to fix this is to replace it with the right matrix.