Xiaomi Redmi 6 is a popular budget smartphone released in 2018, but still in active use. Unfortunately, even with time-tested devices, the screen is the most vulnerable place. Cracks, broken pixels or a broken touchscreen after a fall force owners to look for repair options. How much does it cost to replace the display with Redmi 6, where better to do it and how not to run into poor-quality parts? In this guide, we will analyze all the nuances from prices in service centers to self-diagnosis of malfunctions.
It's important to understand that the cost of repairs depends not only on the model, but also on the type of breakdown, region, status of the service center and even the time of year (in the pre-New Year's months, prices often increase). For example, replacing glass without a sensor will cost less than a full module display with a touchscreen. And in official Xiaomi services, the price may be higher than that of private craftsmen, but they guarantee original details.
How much does it cost to replace the screen on Xiaomi Redmi 6 in 2026: current prices
The cost of repairing the Redmi 6 screen varies widely, from 1,500 to 6,000 rubles, depending on several key factors. Below is a table with indicative prices for different types of services (data are relevant for Moscow, St. Petersburg and the regions of Russia in mid-2026).
| Type of service | Cost (₽) | What's in the price | Guarantee |
|---|---|---|---|
| Official Xiaomi service | 4 500 — 6 000 | Original display module, diagnostics, work of the master | 6–12 months |
| Authorized Partner of Xiaomi | 3 800 — 5 200 | Original or certified parts, work | 3–6 months |
| Private workshop (with guarantee) | 2 500 — 4 000 | High-quality non-original screens (A+, Copy), work | 1-3 months |
| Private Master (without warranty) | 1 500 — 2 800 | Budget spare parts (Copy, low quality), work | No, 7 to 14 days. |
| Self-sustaining replacement | 1 200 — 3 500 | Only the cost of the spare part (excluding tools) | No. |
⚠️ Note: Prices are shown in the table without any additional work, and if the diagnostics show that not only the screen is damaged, but also the plume, the power controller or other components, the total amount can increase by 30-50%. ₽, a repair of chips - from 2 000 ₽.
The regional ratio is also worth considering: in million-plus countries (Moscow, St. Petersburg, Yekaterinburg), prices are 10-20% higher than in small cities, and in remote regions (the Far East, Siberia), the cost can be overstated due to logistics costs for the delivery of spare parts.
Original vs. Copy: Which Screen to Choose for Redmi 6?
One of the key issues when replacing the screen is the quality of the parts, and there are three main types of displays on the market for the Redmi 6:
- 🔹 Original (OEM) — It's manufactured in the same factory as the screen in the new phone, and it's 100% compatible, but it's expensive (from 3,500). ₽ module).
- 🔹 Certified (A)+) — High-quality, licensed copy, only distinguished from the original by the manufacturer's logo, 2,000 to 3,000 ₽.
- 🔹 Copy: Budget option, often with the worst color, brightness and sensitivity of the touchscreen. Cost: 800-1 500 ₽.
How do you tell the original from the fake? Here are some signs:
- 📱 Manufacturer logo: The original screen usually has Xiaomi, Tianma or Tianma markings on it. BOE (manufacturer).
- 🔍 Build quality: copies often show gaps between glass and frame, uneven edges.
- 🎨 Color rendering: the original has saturated colors without yellowness, and copies can "soap" the image.
- ☀️ Brightness: the maximum brightness of the original is 450-500 nits, in copies it is lower by 20-30%.
⚠️ If the master offers a screen cheaper than 1,500 ₽, It's probably a low-quality replica with a shortened lifespan, and these displays often fail after 3 to 6 months (touchscreen peels off, broken pixels appear, sensitivity deteriorates).
How to check the screen before buying?
Where is it better to repair: official service or private workshop?
The choice between a formal service and a private wizard depends on your priorities: quality, price or speed. Let's consider the pros and cons of each option.
Official Xiaomi service
Pros:
- ✅ Work and parts warranty (usually 1 year).
- ✅ Original parts with factory calibration.
- ✅ Diagnostics before repair (identify hidden faults).
Cons:
- ❌ High cost (30-50% more expensive than private owners).
- ❌ Long term repair (from 3 to 7 days).
- ❌ Not all cities have official centers (you have to send your phone by mail).
Private workshop
Pros:
- ✅ Price down 20 to 40%.
- ✅ Quick repairs (often on the day of treatment).
- ✅ Flexible approach (you can agree on urgency or discount).
Cons:
- ❌ The risk of getting into poor quality parts.
- ❌ The guarantee is short (or not at all).
- ❌ There is no guarantee that the master will properly assemble the phone (may remain gaps, broken sensors).
⚠️ Note: If you are choosing a private workshop, be sure to check out:
- Reviews on Yandex.Maps or 2GIS (especially negative ones – how the wizard reacts to them).
- A warranty card (even if the warranty is only 1 month, it is better than nothing).
- The appearance of the workshop: if it is dirty, the tools are rusty, and the masters work without gloves - it is better to leave.
💡
Before repairing, back up your data! Even if the screen crashes but the phone turns on, connect it to your computer and copy photos, contacts and other important files. After changing the screen, sometimes you reset your settings or you have errors in the system.
Step-by-step: how to replace the screen on Redmi 6
If you decide to save and change the screen with your own hands, you will need:
- 🔧 Screwdriver Set (Phillips #00, Y00, spudger).
- 🔥 Hair dryer or thermo-air station (for softening glue).
- 🧲 Screen-take-down suction cups.
- 📱 New display module (order from a trusted site, such as AliExpress with a seller rating above 98%).
- 🛡️ Protective glass (so as not to damage the new screen during assembly).
Sequence of action:
☑️ Preparation for the Redmi 6 screen replacement
⚠️ Attention: The most common mistake you make when you replace yourself is to damage the battery plume, and if you accidentally break it, the phone will stop turning on, and it will cost 2,000 to 3,000 dollars to repair. ₽ Also be careful with flexible camera plumes and speakers, they break easily!
If you've never taken a phone apart, we recommend watching the YouTube video manual first (e.g., from Repair Universe).
- How to properly disconnect the battery (if you do not turn it off, you can burn the motherboard).
- How to remove adhesive tape from the plumes (it can not be pulled - only carefully cut).
- How to align a new screen before gluing (otherwise there will be gaps).
1. whether the display plume is connected correctly (sometimes it is inserted "upside down").
2. whether there is damage on the plume (microcracks, contamination).
3. whether the new screen is compatible with your Redmi 6 revision (the model has several modifications).-->
Frequent screen replacement problems and how to avoid them
Even after professional repairs, problems can occur, and here are the most common ones and how to fix them:
| Problem. | Possible cause | Decision |
|---|---|---|
| The screen doesn't respond to touch. | Unconnected or damaged touchscreen plume | Disassemble the phone and check the connection of the plume |
| There's broken pixels. | Screen marriage or mechanical damage during installation | Apply for a warranty (if any) or replace the screen |
| The screen flickers or spontaneously changes brightness | Poor plume contact or faulty backlight controller | Reconnect the plume, check the brightness settings |
| The sensors (lights, approximations) are not working. | The plume is damaged or the sensors did not migrate to the new screen | Reconfigure sensors in Settings → System → Sensors or replace the plume |
| The phone will not turn on after replacement | Short circuit, battery or motherboard damage | Take to the service for diagnosis (do not repair yourself!) |
Critical information: If after changing the screen, the phone starts to overheat or discharge quickly, turn it off immediately! this is a sign of a short circuit that can cause the battery to catch fire.
To minimize the risks, follow these tips:
- 🔋 Before repair, fully charge your phone (100 percent) – this will help avoid power problems during diagnosis.
- 📸 Take a picture of the location of the plumes before disconnecting - this will save you from errors during assembly.
- 🧴 Use a special glue B-7000 for screen fixation (normal superglue is not suitable!).
How much does it cost to repair other components of Redmi 6?
Sometimes it's not just the screen that suffers when it falls, but here are the estimated prices for repairs to other Redmi 6 nodes (relevant to 2026):
- 🔋 Battery replacement: 1,200–2,000 ₽ (original) or 600-1 200 ₽ (copy).
- 📷 Main camera repairs: 1,500–2,500 ₽ (depends on the module model).
- 🔊 Replacement of speaker/microphone: 800–1,500 ₽.
- 🔌 Repair of the charging connector: 1000-1 800 ₽.
- 🖥️ Flashing after a failed update: 1,000–2,000 ₽.
If the phone falls into the water, the cost of repair can reach 5,000-7000 ₽ (In some cases, it is cheaper to buy a used Redmi 6 in good condition (the price of the Avito is about 3000-5000). ₽).
💡
If the phone doesn't turn on after a fall, don't rush to accept expensive repairs. First check if it responds to charging (if the indicator lights up); if it does, the problem could be in the screen or the plume; if it doesn't, it's likely that the motherboard is damaged and the cost of repairing it will be 70-80% of the cost of the new phone.