Broken glass or black screen on Xiaomi Redmi Note 9 Pro is a situation that instantly turns a modern smartphone into a useless piece of plastic and metal.The owner of the device immediately wonders about the cost of restoration, as the display is one of the most expensive components in the design of the gadget. In 2026, the market for spare parts has undergone significant changes, and the prices of components for models of the past can vary in a wide range.
The cost of replacement depends on the type of matrix chosen, the quality of the consumables used and the pricing policy of the service center. It is important to understand that the original module and the cheap copy are two completely different stories in terms of both price and durability. We will discuss the current prices in detail so that you can make an informed decision.
You should not ignore the damaged screen, even if the touchscreen is still working. Small cracks tend to grow, and the ingress of moisture or dust into the case through the chips can disable other components, which will increase the final bill for repairs several times.
Factors affecting the final cost of repairs
The first thing that users encounter when searching for a service is a huge price range. Why does one wizard name one sum and one and a half times the official service? The answer lies in the origin of the spare part. The original display is completely factory-specific, has the right color reproduction and declared brightness. Copies are divided into quality classes, where budget options often sin poor sensor calibration.
The second important factor is the complexity of the replacement procedure itself: the Redmi Note 9 Pro has a glass back cover, which requires careful dismantling using a heat pad or special glue. Inept actions can damage the plumes or the cover itself, which will require additional investments.
The price is also affected by the warranty period and the equipment used. Professional services use separators to separate the glass and the matrix, which in some cases allows only the glass to be changed, while retaining the original matrix. However, for this model, the entire module is often changed, since the matrices here are AMOLED, and the risk of damage when glued is too high.
⚠️ Warning: If you are offered a screen replacement at a price well below the market average, this almost always means using a refurbished matrix or refurbished parts that may fail in a couple of months.
Geographical factors are also important: in large metropolitan areas, rent and salaries for craftsmen are higher, which inevitably translates into a check for a client. In smaller cities, the cost of working may be lower, but it is more difficult to find quality parts there.
Price comparison: original, high-quality copy and budget version
We'll go through the price ranges available in 2026, and understanding the difference between them will help you avoid overpaying or getting a low-quality product, and the average cost of a framed module is about 60-70% of the price of a new smartphone.
- 💎 Original (Service Pack): It comes in factory packaging, often with the brand logo, has the perfect build and manufacturer warranty.The price is highest, but you pay for reliability.
- ⭐ High Copy: Visually almost identical to the original, color bright, touchscreen responsive. Often these modules do not have the Mi logo on the plume. Optimal choice for price/quality ratio.
- 💸 Low Copy: It's noticeably paler, it can be wider than the frame, it can slow down, it's a temporary fix.
And you can also mention the glass-only replacement service, which is that if the array is intact and shows a stripless image, and only the top glass is broken, you can save up to 40 percent of the cost. AMOLED-This procedure requires high-precision equipment and is not performed in every service.
The table below shows the estimated prices for components and work in 2026:
| Type of spare part | Cost of the part (ruble) | Cost of work (ruble) | Total (roughly) |
|---|---|---|---|
| Original (with frame) | 5500 - 6500 | 1500 - 2000 | 7000 - 8500 |
| Quality copy | 3000 - 3800 | 1200 - 1500 | 4200 - 5300 |
| Budget copy | 1800 - 2200 | 1000 - 1200 | 2800 - 3400 |
| Glass replacement (original matrix) | 2500 - 3000 | 2000 - 2500 | 4500 - 5500 |
The cost of self-replacement of the screen
Many users are considering self-repairing to save on the work of the master, in which case you pay only for components and tools, you can order the display on marketplaces or specialized sites, but it is important to check the seller's rating and reviews.
To replace you will need a set of tools: screwdrivers (cross and flat), sucker, mediators for opening the case, tweezers and, preferably, a thermophen or heating pad for softening the glue. The cost of a set of tools for a beginner will be from 500 to 1500 rubles, which also needs to be considered in the budget.
The risks of self-repair are high, you can damage the plume when you sloppy shut down, break the back cover when you open it, or misadjust the new module to leave gaps, and you can also lose your warranty on other components if it was still in effect.
☑️ What you need for a self-replacement
If you do, be sure to watch the video instructions for your model. The design of the Redmi Note 9 Pro has its own nuances of the location of plumes and screws.
Where to change the screen: official service or private master
The choice of repair site is a trade-off between price, speed and warranty: Official service centers (ASCs) use only original parts and comply with the process, but repair times can be as long as several weeks if parts are not available and the price is maximum.
Private workshops and home-based services offer speed, often within 30-60 minutes of replacement, are more flexible in pricing and can offer a choice between the original and the copy, but there is a higher risk of running into an unqualified specialist who will damage the case or not seal the device properly.
- 🏢 Official service: Work and part warranty, original parts, compliance with standards, but long and expensive.
- 🛠️ Private workshop: Quick, cheaper, bargaining option, but you need to carefully choose a proven place.
- 👤 Private Master (on the road): Maximum convenience, but the risks of quality and lack of warranty are maximum.
Technical nuances of replacing the display on the Redmi Note 9 Pro
The screen in the Redmi Note 9 Pro is glued to the frame around the perimeter, and it requires heating to a temperature of about 80-90 degrees to remove it. This is a critical point: overheating can damage the battery or plastic elements of the frame, and underheating will lead to breakage of the glass during dismantling.
Another feature is the fingerprint scanner, which is built into the side button, and if you disassemble the scanner in a careless manner, you can damage the scanner plume and the unlock function will stop working, and it's also important to apply the new B-7000 glue correctly or use a factory adhesive base, otherwise dust will enter the body.
Once you install the new module, you need to check the entire touchscreen, the proximity and brightness sensor, and sometimes you need to calibrate the screen through the engineering menu, although modern modules usually work right away.
⚠️ Warning: Do not use superglue or other aggressive chemicals to fix the screen.They can evaporate and settle on the lenses of cameras or corrode the plastic body.