How much does it cost to replace the screen on Xiaomi Redmi 9T: we analyze the prices and nuances
A broken screen on the Xiaomi Redmi 9T is one of the most common problems faced by owners of this budget smartphone. Falling from a height, hitting or even a bad press can lead to cracks, broken pixels or a complete failure of the display. But how much will you pay for repairs? Prices vary from 1,500 to 7000 rubles, and the difference depends on many factors: type of breakdown, quality of parts, repair site and even region of residence.
In this article, we will discuss in detail:
- 🔧 Cost of replacement in official services, informal workshops and self-repair
- 📱 Screen types for Redmi 9T: Original vs. copy – what to choose and how long it will last
- ⚠️ Common repair frauds and how to avoid them (e.g., replacing parts or imposing unnecessary services)
- 🛠️ A step-by-step guide for those who decide to change the screen themselves
If you’re already facing a problem and looking for a cheaper and safer way to repair the Redmi 9T, this guide will help you make an informed decision, and if you haven’t already broken your screen, you’ll learn how to protect it in advance and save on future repairs.
Xiaomi vs. Unofficial Workshops: Where is Cheaper?
The first question that arises from owners of Redmi 9T with a broken screen: contact an authorized service center Xiaomi or look for a private workshop? The price difference can reach 3-4 thousand rubles, but not always cheaper means better. Let's analyze the pros and cons of each option.
In official services, you are guaranteed to get the original screen (or its equivalent, certified by Xiaomi), will give a warranty of 3 to 12 months and will be diagnosed for hidden damage. However, the prices are higher: for a replacement screen on the Redmi 9T in 2026, they ask from 4,500 to 6,500 rubles.
In the informal workshops, prices are lower - from 1,800 to 3,500 rubles, but there are risks:
- 🔄 A non-original low-quality screen (e.g., with poor color reproduction or sensitivity) may be installed)
- ⏳ The warranty is often limited to 1-2 weeks or is not available at all.
- 🛑 The wizard can “find” additional breakdowns (such as a sensor or plume) and impose repairs.
⚠️ Note: Some services use copies from China as an "original" screen at the price of the original. To avoid cheating, ask the workshop to provide a warranty card indicating the screen model and check it for authenticity through the Xiaomi website.
If the budget is limited, but you want quality, look for workshops with good reviews and request a photo of the original screen before installation. You can also buy a spare part yourself in advance (for example, on AliExpress or in trusted Russian stores) and give it to the master - so you save on a markup.
Cost of screen replacement on Redmi 9T in 2026: comparison table
Prices for screen repair Xiaomi Redmi 9T depend on the type of breakdown, region and service chosen. Below is the current table with approximate prices for June 2026. Note that in the capital regions (Moscow, St. Petersburg) prices can be 10-20% higher than in the provinces.
| Type of repair | Official Xiaomi service | Informal workshop | Self-sustaining replacement |
|---|---|---|---|
| Glass replacement (without damage to the matrix) | 3 500 – 4 800 ₽ | 1 500 – 2 500 ₽ | 800 – 1 500 ₽(glass-only) |
| Replacement of touchscreen (sensor) | 4 000 – 5 500 ₽ | 2 000 – 3 200 ₽ | 1 200 – 2 000 ₽ |
| Complete replacement of the display module (glass + matrix + touchscreen) | 5 000 – 6 500 ₽ | 2 500 – 4 000 ₽ | 2 000 – 3 500 ₽ |
| Diagnosis + replacement of the plume (if required) | 6 000 – 7 500 ₽ | 3 000 – 4 500 ₽ | 2 500 – 3 800 ₽ |
Important: If the phone doesn't turn on after the fall or the screen blinks/strips, the problem may not only be in the display, but also in the motherboard, in which case the cost of repairs will increase by 3,000 to 10,000. ₽.
Prices for self-replacement parts:
- 📱 Original display module (with matrix and touchscreen): 3000 – 4500 ₽
- 🔧 High quality copy (e.g. from the manufacturer Tianma or BOE): 1 800 – 2 800 ₽
- 💎 Glass only (if the matrix is intact): 500 – 1,200 ₽
💡
The most budget option is to replace only glass (if the matrix is not damaged), but this requires experience and special equipment (laminator).
Original vs. Copy: Which Screen to Choose for Redmi 9T?
When you replace your screen with a Redmi 9T, you'll have to choose between installing the original part or saving on a Chinese one, and the price difference can be double, but it's also good, and you'll see what's best and what to look for.
The original screen (OEM) is a part made in the same factory as the components for Xiaomi.
- 🎨 Perfect color reproduction (no yellowness or skewed shades)
- ⚡ Sensitivity of touchscreen at the level of a new phone
- 🔋 Long service life (warranty from 6 months)
Minus one - high price (from 3 000) ₽ detail only).
Screen copies are divided into three categories:
- Premium copies (e.g. from Tianma or BOE): quality matrices, close to the original in characteristics. Price: 1,800 - 2,800 ₽.
- Medium quality: there may be problems with brightness or viewing angle. Price: 1,200 - 1,800 ₽.
- Low quality (often without a brand): poor color reproduction, low sensitivity, rapid wear and tear price: 800 - 1,500 ₽.
⚠️ Note: Cheap Screen Copies for Redmi 9T Often have problems with automatic brightness - the light sensor is not working correctly, and the screen is either too dim or blinding in the dark.
How to distinguish the original from the copy when buying?
- 🏷️ The original screen has a hologram of Xiaomi and a serial number, which can be checked on the manufacturer’s website.
- 🔍 Check the build quality: the original has no gaps between the glass and the frame, all the plumes are carefully soldered.
- 📦 The package must be factory packaging with the logo of Xiaomi or the supplier (for example, DBT or Foxconn).
💡
If you buy a screen on AliExpress, choose sellers with a rating above 98% and reviews in Russian. The product description should indicate "For Xiaomi Redmi 9T" and a display model (for example, JD9365 or NT36672C).
Step-by-step: how to replace the screen on Redmi 9T yourself
If you decide to save and change the screen on the Redmi 9T with your own hands, be prepared for the fact that the process requires accuracy, patience and minimal skills in working with electronics. Without experience, there is a great risk of damaging plumes or the motherboard. However, with the right approach, self-replacement will cost 2-3 times less than in the service.
What you'll need:
New display module (check compatibility with the M2010J19SG or M2010J19SY)
Set of screwdrivers (cross, flat, T3, T4)
Plastic blades or mediators for disassembly of the body
Hair dryer or thermoplatform for softening glue
Screen suction cup
Tweezers and antistatic bracelet (optional, but recommended)
Clay. B-7000 or double-sided tape to fix a new screen-->
Step 1: Turn off the phone and remove it. SIM-You don't have to disconnect the battery, but if you're afraid of short circuits, do it.
Step 2: Heat the edges of the screen with a hair dryer (~60°C) for 2-3 minutes to soften the glue. Don't overheat - plastic body elements can deform!
Step 3: Carefully apply a plastic blade to the screen starting at the bottom edge (where the charging connector is located). Use the suction cup to lift the glass. Be careful - the touchscreen and display plumes are very fragile!
Step 4: Disconnect the plumes from the motherboard. They're fixed by the latches -- pick them up with tweezers. Remember or photograph the location of each connector!
Step 5: Set up a new screen, plug in the plumes, and test the performance before the glue fixation. If everything works, apply a thin layer of B-7000 glue around the perimeter and press the screen.
Step 6: Put the phone back together. Check the touchscreen sensitivity and color reproduction. If there are defects (e.g., yellow spots or broken zones), it's likely a plume or a substandard spare part.
What if the screen doesn’t work after replacement?
Top.-5 Errors when replacing the screen with Redmi 9T (and how to avoid them)
Even experienced craftsmen sometimes make mistakes when repairing the Redmi 9T, which leads to additional costs, and we have collected the most common mistakes and ways to prevent them.
Mistake 1: Using the wrong glue
Many people save and take superglue or double-sided tape, but they don't provide tightness and over time the screen starts to "go away." Solution: use a specialized adhesive B-7000 or LOCA (for laminated screens).
Mistake 2: Damage to the battery plume
If you take the screen off sloppy, it's easy to hit the battery plume, which will cause you to lose charge or completely fail the phone, so you can turn off the battery before disassembling it (if you have experience) or work as carefully as possible.
Error 3: Buying a screen without a proximity sensor
Some cheap copies don't have a built-in proximity sensor, which keeps the screen from going out during the call. Solution: check with the seller if the model supports MIUI firmware without errors.
Error 4: Incorrect installation of the protective glass
If you immediately put a protective glass on after changing the screen, there may be air bubbles or dust underneath, solution: let the glue under the display dry (2-3 hours), then clean the surface with alcohol before sticking the glass.
Mistake 5: Ignoring inspection after assembly
Many people assemble a phone and then they discover that the vibration, speaker, or camera is not working, because the trains are not connected. Solution: once the new screen is connected, but before the final build, check all the functions (touchscreen, camera, sound).
💡
If you've changed the screen and you've stopped charging, you've probably damaged your USB-C connector or power plume. Don't try to fix it yourself, call the service.
How to protect the Redmi 9T screen from damage: prevention is better than repair
Replacing the screen with the Redmi 9T is always time, money and risk. It's much easier to prevent a breakdown than to look for cheaper places to repair. Here are 5 proven ways to protect the display:
1. Install a reliable protective glass
Not all windows are equally useful. Redmi 9T is good.
- 🛡️ Tempered glass with 9H Hardness (e.g. Spigen Glas.tR or Nillkin H)+ Pro)
- 💧 Hydrophobic coating (repels water and greasy traces)
- 📏 Full coverage (does not leave the edges of the display open)
Cost: 300 to 1,000 ₽. Don’t save money – cheap windows crack when you fall first.
2. Use a case with reinforced sideboards
Cases with protruding edges (such as the Ringke Fusion-X or Spigen Tough Armor) protect the screen when falling on a flat surface. It is important that the case is exactly the size - too loose will not save from impacts.
3. Set up "pocket mode"
In Settings → Screen → Pocket mode, enable an option that blocks random taps in your pocket. This will prevent damage to the touchscreen from prolonged pressure.
4.Avoid extreme temperatures
The Redmi 9T has a plastic body that, when heated (like in the sun in a car), can warp and push on the screen, causing cracks.Do not leave the phone under direct beams or near heat sources.
5. Check the screen mounting regularly
If you notice that the glass is starting to come off the edges, don't ignore it, because over time, it's going to get dust under it, and the next time you fall, the screen will crack, so you can glue the glass neatly with B-7000 glue or go to the service.
💡
If you have children, turn on Parental Control in MIUI and set a password to unlock it, which will keep the phone from being hit by accidental throws or toddlers.