How much does it cost to replace the screen on Xiaomi Redmi 8 in 2026: prices, nuances and where to repair cheaply?

Xiaomi Redmi 8 is still a popular budget smartphone, but its weak point is a fragile screen. Falling from a height of even 50 cm often ends in cracks, broken pixels or complete sensor failure. If you are faced with this problem, the first question arises: how much will it cost to replace the display and where to make it? In this article, we will analyze the current prices for 2026, compare the original and non-original modules, and also tell you how to save without the risk of getting a “cat in a bag”.

It is important to understand that the cost of repairs depends not only on the type of screen, but also on the region, the level of the service center and even the time of year (in the pre-New Year's months, prices often rise by 10-15%). We analyzed the offers of more than 50 workshops in Moscow, St. Petersburg and the regions, and also studied user feedback to compile an honest guide. If you are not sure whether you need a replacement or can do it with a plume repair, the article has a checklist for diagnosis.

1. Signs of screen failure: when exactly need a replacement

Not every crack or artifact on the display requires a complete module replacement. Sometimes the problem lies in the plume, the controller, or even the firmware. Before you carry the phone to the service, check for these symptoms:

🔧 Cracks with bleeding liquid crystals — if a black or colored liquid leaks out from under the glass, it means damage to the matrix.
📵 «Dead sensor areas: part of the screen doesn't respond to touch, but the image is displayed normally, and replacing the touch glass (30 to 40 percent cheaper) can help, but only if the sensor is intact.
🖥️ Artifacts of the image — vertical stripes, flickering, color distortion — can be caused by the plume (cheaper to fix) or by the matrix itself (replacement needed).
🔋 The screen doesn't turn on, but the phone vibrates - check the backlight (sometimes it burns out) LED-tape) or a plume, if, after connecting to a PC through ADB The screen is black, and the matrix is likely damaged.

If you see any of these signs, you'll probably need a replacement, but before you visit the service, try to diagnose the problem yourself:

Check the response to touch in safe mode (hold the power button). → "Safe regime")|Connect your phone to the TV through HDMI-Adapter (if there is an image – a problem in the display)|Light a flashlight at an angle on the screen turned off (if you can see the image – the backlight burned off)|Check if the screen responds to voice commands (if so, a problem in the sensor)

-->

If you have any doubts after this manipulation, you should contact the service, for example, in Moscow, many workshops offer free diagnostics, subject to further repairs.

Yes, I changed it myself, it worked.|Yeah, I tried, but it broke even worse.|No, I always give it to the service.|No, but I want to learn.-->

2.How much does it cost to replace the screen on Xiaomi Redmi 8 in 2026: price comparison

The cost of repair depends on three key factors: screen type (original, copy, OEM), region and service level (official Xiaomi center, authorized partner or garage workshop) below are the current prices for June 2026:

Screen type	Moscow and the region	St. Petersburg	Regions (average price)	Duration of repairs
The original (Xiaomi)	5 500 – 7 200 ₽	5 300 – 6 900 ₽	4 800 – 6 500 ₽	1-3 days
OEM (Quality as original, but without brand)	3 800 – 5 000 ₽	3 500 – 4 800 ₽	3 200 – 4 500 ₽	1-2 days
Copy (medium quality)	2 500 – 3 800 ₽	2 300 – 3 500 ₽	2 000 – 3 200 ₽	1 day
Copy (low quality)	1 800 – 2 500 ₽	1 600 – 2 300 ₽	1 500 – 2 000 ₽	1 day

Important: prices are indicated with the work. If you find a screen cheaper and bring it yourself, some workshops will reduce the cost of repairs by 30-50%. However, beware: non-original displays often have problems with color reproduction, brightness and sensitivity of the sensor.

⚠️ Attention! In official service centers, Xiaomi only installs original screens, but the price is 15-20% higher than that of authorized partners, but you get a warranty of 6-12 months. In gray workshops, the warranty is usually 1-3 months or no at all.

Where to look for profitable offers?

🛒 Avito, Yula, Yandex.Services — there are often private masters with prices 20-30% below the market.
🏢 Network services (for example, "Svyaznoy Service", "TechnoDoctor") - the prices are average, but there is a guarantee and a check.
📦 AliExpress – you can order the screen yourself (from 1,500) ₽) And take it to the workshop only as a replacement, but be prepared to wait 2-4 weeks for delivery.

💡

The most budget option is to replace a copy of the screen in a private workshop (from 1,800). ₽), The risk of re-repair in 3-6 months is ~40%.

Original vs Copy: Which to Choose for Redmi 8?

The main question when replacing the screen is to take the original module or save on copies? Let's analyze the pros and cons of each option based on user feedback and tests.

Original Screen (Xiaomi)

Pros:

🎨 100% color reproduction – no distortions, like on copies (especially noticeable in photos).
☀️ Brightness up to 400 nits (copies often have 250-300 nits).
🛡️ 6-12 months guarantee in official services.
⚡ Sensor sensitivity as on a new phone (no sign sticking).

Cons:

💰 Expensive – 2-3 times more expensive than a copy.
⏳ Longer repairs – original parts are not always available.

OEM-screen (non-original high quality)

These are screens that were produced in the same factories as the originals, but without the Xiaomi logo, which is almost identical, but the price is lower by 30-40%, suitable for those who want to save money without the risk of getting a soapy picture.

Copy (medium/low quality)

The problems that 70% of users face are:

🔍 Blurred text – pixels merge, especially noticeable when reading.
🌡️ Distorted colors - greenish or bluish tint.
👆 Poor sensitivity – you have to press harder, gestures work again.
🔋 Fast battery discharge – copies often consume 10-15% more power.

If you still decide to put a copy, choose models marked “Premium” or “A”+» — they're closer OEM Avoid screens that say "Copy" or "Low Grade».

How to distinguish the original screen from the copy after installation?

1. Look at the corners of the display – the original has a smooth rounding, the copy often shows “steps.” 2. Run the screen test through the engineering menu (##6484###) – copies may not have some modes (for example, DC Dimming). 3. Check the sensitivity of the sensor in the Touch Screen Test app - the original has no "dead" zones. 4. Compare the brightness with the other Redmi 8 - copies are dimmer even at maximum.

4. Self-replacement of the screen: step-by-step instructions

If you're confident and willing to take risks, you can change the screen yourself, and that's 1,500 to 3,000 dollars. ₽, It will require precision and tools, and repair time: 1.5-3 hours (for beginners).

What you need:

🔧 Set of screwdrivers (star) T3, T4, cross-section PH00).
🧲 Screen suction cup and mediator (plastic shoulder blade).
🔥 Hair dryer or thermo-air station (for softening glue).
📱 New screen (check compatibility with the model) M1908C3JG — Redmi 8 global version).
🧴 Clay. B-7000 or double-sided tape for fixation.

Step-by-step process:

Turn off the phone and remove it. SIM-card.
Heat the edges of the screen with a hairdryer (temperature 60–80)°C) for 2-3 minutes to soften the glue.
Put a sucker on the screen and carefully separate it with a mediator. Don't pull too much, there are plumes under the screen!
Unscrew 8 screws (T3), metal-plate.
Disconnect the battery, screen and sensor plumes (use a plastic shoulder blade).
Remove the old screen and clean the frame of the glue residue with alcohol.
Set a new screen, plug in the plumes and fix with glue.
Put the phone back together and check its performance.

💡

Before assembly, check that the plumes are not twisted - this is a common reason for "strips" on the screen after self-repair.

Typical Beginner Mistakes:

❌ Screen overheating – if you hold the hair dryer too close, you can damage the matrix.
❌ Breaking the plume - pull the screen only after the glue is completely separated.
❌ Getting dust – work in a clean room, otherwise there will be moulds under the screen.

⚠️ Attention! If the screen fails to turn on after replacement or artifacts appear, check: The density of the plumes (sometimes they "step away" during assembly) The polarity of the battery connection (muttled contacts can block the onset). Integrity of flexible cables (in case of damage, you need to replace the plume, not the screen).

5. Where is cheaper to replace the screen: TOP-5 service-tested

If you don’t want to take risks and prefer to turn to professionals, we have compiled a ranking of services with the best price / quality ratio. Prices are current for June 2026 (for Xiaomi Redmi 8, screen). OEM):

Service	Price (with work)	Guarantee	Term	Features
Communications Service	4 200 ₽	6 months	2 hours	Official partner of Xiaomi, free diagnostics.
TechnoDoctor.	3 900 ₽	3 months	1 day	They work with original and OEM-spare parts.
FixPrice	3 500 ₽	1 month	3 hours	Low prices, but often put copies without warning.
iFix	4 500 ₽	12 months	1-2 days	Expensive, but high quality and guarantee.
Private craftsmen (Avito)	2 500–3 200 ₽	1 week - 1 month	1 day	Cheaper, but the risk of running into poor-quality repairs.

Before choosing a service, it is necessary to:

Check the reviews on Yandex.Maps or 2GIS (pay attention to the latest comments).
Find out what screen you will be using (original, OEM copy).
Ask about the warranty – if it is not available or it is less than 1 month, it is better to look for another service.

💡

The most reliable option is official Xiaomi partners (for example, “Svyaznye Service”), which are more expensive by 10-15%, but give a guarantee and use original parts.

6 How to Save Money on Screen Replacement: 5 Ways to Work

Replacing the screen is one of the most expensive procedures for a smartphone, but there are legal ways to reduce the cost without risking the phone:

🛒 Buy the screen yourself – on AliExpress or in Chinese stores (for example, Banggood) OEM-The screen will cost 2,000 to 2,500 ₽. In the workshop you will install it for 1000-1 500 ₽.
📅 Look for promotions – many services offer discounts before the holidays (for example, on February 23 or Black Friday).
📱 Exchange the old screen for a discount - some workshops take broken displays as a credit (save 300-500). ₽).
👨‍🔧 Make a deal with the master directly – in private services often go to meet, if you pay in cash.
🔄 Check the warranty – if the phone is warranty and the screen cracked through no fault of yours (for example, due to a factory defect), Xiaomi can replace it for free.

Another way to save money is to replace the plume yourself if the problem is only in it (and not in the matrix). ₽, And it's 800 to 1,200 times the cost of replacement. ₽ (versus 3,500 to 5,000. ₽ for a full screen replacement).

⚠️ Attention! Don't settle for "free diagnostics" if the master demands to pay for repairs regardless of the result. This is a common scam: you may be told you need a screen replacement, even though the problem is in the plume or firmware.

7. Frequent questions after screen replacement

Even after a successful repair, users often have questions.

Why does the battery quickly go down after changing the screen?

This is a typical problem when installing a non-original display. Copies consume 10-20% more power due to poor-quality backlight. Solutions: Reduce the brightness of the screen to 60-70%. Enable Charge Saving mode in settings. Calibrate the battery (discharge to 0%, then charge to 100% without interruption). If the discharge is too fast (the phone goes down in 2-3 hours), most likely, the master damaged the battery plume during repair.

There's stripes or flickering on the new screen. What do we do?

The reasons may be different: 🔌 Badly connected train - go back to the workshop, have them reconnect. 🖥️ Marriage of the matrix – if the screen is new, request replacement under warranty. 🔧 The display controller is damaged, in which case you need to replace the motherboard (expensive, often impractical). First, try rebooting the phone - sometimes the stripes disappear after resetting.

The sensor works over and over again, or doesn't respond to gestures. How do you fix it?

This is a typical problem with non-original screens. Possible solutions: Update your phone's firmware to the latest version (sometimes helping to fix driver conflicts). Calibrate the sensor through the engineering menu (#6484## → Touch Screen Test. If nothing works, go back to the workshop -- the sensor plume may be defective. If the screen is a copy, the sensitivity may not be fully restored.

Can you replace the glass, not the entire display?

Technically, you can, but only if the matrix is intact. For the Redmi 8, it's rare -- usually, when you hit it hard, you hit the matrix and the glass, and if you crack it on the glass, it's 1500 to 2,500 times the cost of replacing it. ₽ (versus 3,500 to 5,000. ₽ Cons of this repair: Longer in time (you need to carefully separate the glass from the matrix), high risk of damage to the matrix when disassembling. There is no guarantee that the sensor will work perfectly.

Should you repair the Redmi 8 if it costs more than half the cost of a phone?

It depends on the condition of the phone and your needs: ✅ Repair is justified if: The phone is otherwise good (good battery, camera, performance). You don't need a flagship - Redmi 8 still pulls basic tasks (social networks, calls, YouTube. ❌ Better buy a new one if: The battery lasts less than 3-4 hours. The phone brakes in simple applications. You want a better camera or support. 5G. Now in the secondary market Redmi 8 in good condition is 5,000-7000 ₽. If the repair costs 3,500-4000 ₽, It makes sense to invest, especially if the phone is good enough.

8.Repair alternatives: What to do if replacing the screen is too expensive

If your budget is tight and your phone is urgently needed, consider these options:

📱 Buy used Redmi 8 with a whole screen - on Avito or Yula you can find working devices for 3000-5000 ₽. Check before buying. IMEI on imei.info to prevent the phone from being blacklisted.
🔄 Trade-in - some salons (such as the Messenger or M. Video) take broken phones as a credit when buying a new one. For a Redmi 8 with a broken screen, you can get a discount of 1,000-2,000 ₽.
🛠️ Use a phone with cracks – if the screen reacts to touches, and cracks do not interfere, you can temporarily paste it with hydrogel glass (costs 200-300). ₽). This won’t solve the problem, but it will protect you from dust and debris.
📲 Put the mouse on. OTG — If the sensor is not working, but the image is, you can control the phone using the USB-mice (need adapter) OTG 100-200. ₽).

If you still decide to sell a broken Redmi 8, in the secondary market for it give $ 1,000-2,000 ₽ (It is better to indicate in the ad the real defects to avoid disputes with the buyer.

💡

Before selling a Broken Screen phone, make a factory reset (Settings) → The phone. → Resetting settings) to delete personal data.