Display damage is one of the most frequent and unpleasant problems faced by owners of Xiaomi Redmi Note 6 Pro smartphones. The device was released in 2018 and has proven itself as a reliable budgetary device, but time takes its toll, and the fragile glass of the module often cannot withstand falls. When a "web" cracks appear on the screen or, worse, the touchscreen stops working, the user is faced with the question of the feasibility and cost of recovery.
The cost of repairs can vary widely, and it depends on the method of recovery and the quality of components. It is important for owners to understand that a cheap replacement often results in a loss of image quality or a decrease in sensor sensitivity.
In this article, we will discuss in detail what the total amount of a check in the service center is made up of, how much it costs to buy spare parts for self-installation and whether it is worth starting this repair in 2026-2026. An objective cost assessment will help you make an informed decision and not overpay for the services of masters or unnecessary components.
Factors affecting the final cost of repairs
The pricing of replacements is nonlinear. The main factor is the type of spare part selected. The market is oversupplied, and the price can vary by three to four times depending on the origin of the part. The original modules that were officially supplied to the assembly plants cost the most, but guarantee the factory quality of color reproduction and brightness.
The second important aspect is the format of the work, and if you go to an authorized service center, you pay not only for the part, but also for the warranty, the qualification of the engineers and the use of professional equipment. In garage workshops or self-repair, the cost decreases, but the risk of getting damaged or damaging other components increases.
In large metropolitan areas, rent and masters' salaries are higher, which translates into a final check for the client, and if an urgent replacement is required in 30-40 minutes, the service can charge a markup for express service.
⚠️ Attention: Excessively low price (e.g, 1000-1500 almost always indicates the use of frankly defective copies or restored modules with defects.
If a frame or a back cover is damaged, the craftsmen may insist on replacing them or strengthening them, which will also increase the total amount. Complex repairs are always more expensive than simply replacing the glass.
Analysis of prices for display modules: Original, Copy and B / U
The Redmi Note 6 Pro (M1805E10A) parts market offers three main categories of components: Understanding the difference between them is key to saving without loss of quality. Original modules are becoming rarer as the model is discontinued. Their price on the black market can reach 3000-4000 rubles and higher, which often exceeds the cost of the used phone itself.
The most popular segment is high-quality copies (High Copy, AAA+), which are manufactured in the same factories as the originals, but using simplified processes or other matrices, visually they may be almost identical to the factory ones, but have a slightly lower brightness or a cooler shade of white, and the cost of such solutions ranges from 1500-2000 rubles.
The most budget option is frankly cheap copies or refurbished modules, which often use an old matrix with new glass or a cheap analogue of a touch screen, the sensor on these screens can work with a delay, and the colors will be faded, the price of such modules starts from 800-1000 rubles.
Separately, we should look at the market for B/U parts. At sites like Avito, you can find screens from broken phones that have survived the matrix. This is a lottery: the risk of buying goods with burnt out pixels or dead zones of the touch screen is very high, but the price can be attractive - about 1000-1200 rubles.
Comparative table of the cost of components and works
To make it easier for you to navigate the numbers, we have compiled a summary of the current prices in the parts and repair market, which are averaged and can vary by region and currency.
| Type of service / spare parts | Cost of spare part (ruble) | Cost of work (ruble) | Total (roughly) |
|---|---|---|---|
| Original Module (Service Pack) | 3500 - 4500 | 1000 - 1500 | 4500 - 6000 |
| Quality copy (AAA+) | 1600 - 2200 | 800 - 1200 | 2400 - 3400 |
| Budget Copy (Low Copy) | 800 - 1200 | 800 - 1000 | 1600 - 2200 |
| Self-replacement (copy) | 1200 - 1800 | 0 | 1200 - 1800 |
And you can see from the table that self-assembly saves you the equivalent of the cost of a master's work, but it only works with straight hands and a minimum set of tools, and if you make a mistake in building it, the savings can turn into losses.
💡
The best choice for the Redmi Note 6 Pro is a high-quality copy of the module, since the price of the original is unreasonably high for the age of the device, and cheap copies often disappoint the quality.
The cost of self-replacement of the screen
If you're saving and replacing your own display, you'll need not only the module itself, but also a specialized tool. The standard set for opening a smartphone includes a suction cup, plastic shoulder blades (mediators), a set of screwdrivers (usually a cross and a star) and tweezers.
The process of replacing the Redmi Note 6 Pro has its own peculiarities: the back cover is glass and glued around the perimeter, which requires careful heating and unsticking. The main difficulty is to properly disconnect the plumes and install the new module without skewing. Sloppy handling can damage the main camera plume or speaker.
☑️ What to do to replace the screen
It is also important to consider consumables. To fix the back cover and the screen module, special glue (usually B-7000) or high-quality double-sided tape is required. Neglecting this step will cause the screen to dangle in the case, and dust will get inside the case.
⚠️ Warning: Be sure to turn off the battery before work begins! Even a brief circuit of the contacts of the battery connector can disable the power controller on the motherboard.
If you don’t have experience, it’s a good idea to watch detailed video instructions for disassembling exactly your board revision. Xiaomi’s internal layout may vary slightly from batch to batch, and the location of the plumes is sometimes different.
Where to do the repair: Service or (DIY)
The choice between a service center and self-repair depends on your skills and free time. Professional service gives you the main advantage of a guarantee. If the screen stops working in a week or artifacts appear, you must replace the spare part for free. In the case of self-repair, all the risks fall on your shoulders.
On the other hand, it takes time to find a wizard, deliver the device and wait for the order to be completed. Often, the wizards do not keep spare parts on old models and order them for the client, which takes from 1 to 3 days. Self-replacement takes only 40-60 minutes, except for the time to wait for the order to be delivered from the marketplace.
When choosing a workshop, be sure to check whether they warrant a touchscreen. Often, the warranty applies only to the image, not to the sensor response. Also ask if they retain moisture protection (although it was minimal on the Note 6 Pro and most likely violated after the first opening).
How to check the master before handing over the phone?
If you choose the DIY path, order the part from large online stores with the possibility of returning, which will allow you to check the module before work: connect the plume (without gluing the screen!) and check the work of the image and the touch.