Damage to the smartphone display is always an unpleasant surprise that can knock anyone out of the rut.It is especially frustrating when a popular and reliable model like the Xiaomi Redmi 9A suffers, which has proven itself as a great budget device. Owners often face cracks in the glass, the appearance of “inks” or a complete failure of the matrix, which makes the operation of the device impossible without urgent intervention.
The question of the cost of repairs is a big one almost immediately after the incident, and the market offers many options, from buying parts on Chinese sites to going to authorized centers. The price of replacing a screen can vary widely, and it is important to understand what it consists of, so as not to overpay for a poor service or, conversely, not to run into scammers.
In this article, we will discuss in detail the pricing policy in the market of spare parts for Redmi 9A, compare the cost of original modules and quality analogues. You will learn what factors affect the total amount of the check, whether to change only glass or the entire module, and get proven tips on choosing a workshop. Understanding these nuances will help you save money and bring the gadget back to life in the shortest possible time.
Factors Affecting the Cost of Display Replacement
The final price of a smartphone repair is a complex process, dependent on many variables. The first and most obvious factor is the type of part. 9A (model M2006C3MNG) The market offers both original components from the manufacturer and copies of various quality classes (High Copy, OLED-substitute).
The second important aspect is the pricing policy of the service center chosen: large authorized centers tend to use only original parts and provide a formal guarantee, which inevitably affects the cost. Private workshops can offer a lower price through the use of analogues or lower overhead, but here the risk of running into poor-quality material increases.
The cost is also affected by the urgency and complexity of the work. Although replacing the module with the Redmi 9A is not technically the most difficult procedure, the accuracy of the execution directly affects the tightness of the case and the operation of the touch screen.
⚠️ Warning: Too low price (below the market value of the part itself) often indicates the use of remanufactured ("replacements") or discarded modules that may fail in a couple of weeks.
In large metropolitan areas, rent and salaries are higher, which automatically increases the cost of services compared to smaller cities, but the quality of control in large networks is usually stricter.
Original vs. Copy: Comparison of Price and Quality
When choosing a part, the owner of Xiaomi Redmi 9A faces a dilemma: overpay for the original or save on the analogue. Let’s examine the key differences that affect not only the price, but also the user experience.
The original display module (Original) is fully factory-specificated. It provides the right color reproduction, brightness and, critically, stable performance of the touchscreen. High Copy can sin with dead zones on the edges of the screen, reduced brightness or the wrong viewing angle, although they may look identical on the outside.
The cost of the original framed module (which makes it easier to replace) is usually 30-50% higher than that of the quality counterpart. However, the life of the original is much longer. Cheaper copies often have thinner glass that is easier to break the next fall, or adhesive base that quickly loses properties.
- 📱 Original: Perfect color calibration, full software compatibility, manufacturer warranty, high price.
- 🎨 Quality copy: Good color reproduction (close to the original), normal touchscreen operation, average price, risk of marriage 5-10%.
- 💸 Budget copy: Lower viewing angles, brightness problems, low price, high risk of re-repair.
When buying a copy, it is important to pay attention to the packaging and labeling. Often unscrupulous sellers will give copies for the original, especially if the module is already framed. You can check the quality by turning on the device and setting the maximum brightness of the white image - the original must glow evenly without yellow or gray spots.
Current price list for spare parts and work
The parts market is dynamic and prices can vary depending on the exchange rate and logistics chains. Below is a table with indicative prices for replacement of the display module for Xiaomi Redmi 9A at the moment.
| Type of spare part | Cost of the part (ruble) | Cost of work (ruble) | Total (roughly) |
|---|---|---|---|
| Original (with frame) | 2500 - 3200 | 800 - 1200 | 3300 - 4400 |
| Copy (High Copy) | 1400 - 1800 | 600 - 900 | 2000 - 2700 |
| Budget copy | 900 - 1200 | 500 - 700 | 1400 - 1900 |
| Glass only (recovery) | 800 - 1000 | 1000 - 1500 | 1800 - 2500 |
It's important to note that only glass replacements (if the matrix is intact and only the top glass is broken) require special equipment, a separator and a laminator. Not all services take this job, because the risk of damaging the matrix in the process is high, so most often, the masters offer a replacement module assembled, which is faster and more reliable.
Prices at Xiaomi authorized service centers can be higher than the specified 20-30%, but there you get an official warranty for parts and work, as well as confidence in the authenticity of the part.
💡
When ordering a spare part, be sure to check the plume for the presence of breaks and the integrity of the connector - these are the most vulnerable places during transportation.
Replacement process: what is included in the cost
Understanding what the wizard is doing helps you to judge the fairness of the price. Replacing the screen with a Redmi 9A is not just a "unplugged and glued" procedure involves several technologically important steps.
First, a full diagnostic is done, and you have to make sure that the problem is in the display, not the plume or the power controller, then you have to open the case carefully, and the Redmi 9A back cover is plastic, but it's glued to a powerful tape, and it requires heating and special suction cups to keep the body from damaging.
Then the wizard disconnects the battery, dismantles the motherboard (in some cases), or neatly disables the display plumes. The old module is removed, the frame is cleaned of glue residues. The new module is tested "on weight" before final adherence. Only after checking the touchscreen and the image is final assembly and installation of a new moisture-protective tape.
☑️ Checklist after repair
Quality work also involves installing a new sealing layer, so if the master just dripped glue around the perimeter or did not glue anything at all, moisture protection (which is already conditional in public sector workers) completely disappears, and dust will fill into the gaps.
Can I replace the screen myself?
Many users, when they see the cost of parts, think about self-repair. In theory, the Xiaomi Redmi 9A is one of the easiest models to disassemble. The plastic back cover is easier to remove than the glass counterparts of flagships, and the interior layout is quite free.
To replace it, you'll need a suction cup, a mediator (plastic blades), screwdrivers (cross and possibly Torx), tweezers and a dryer to heat the glue. However, even with tools, it's easy to make a mistake. The main danger is to damage the plume when you connect or crush the battery with a tool.
⚠️ Warning: Incorrect connection of the display plume with the battery on can short circuit and failure of the power controller on the motherboard.Always turn off the battery before any manipulations!
If you don't have experience in electronics repair, saving 500-800 rubles (cost of work) can turn into buying a new phone. A professional craftsman does the job in 20-30 minutes, with the skills and tools to safely disassemble.
The hidden risks of self-repair
Guarantee and post-warranty service
One of the key arguments for using the service, rather than self-repairing or buying from hand, is a warranty: When you change your screen at the service center, you get a warranty card for 14 days to 12 months, depending on the type of spare part.
The warranty covers manufacturing defects: strips, touchscreen detachment, broken zones, but it does not cover mechanical damage sustained during operation (break again, drop, flood), which is why it is important to keep a check and the act of work performed.
If you have problems during the warranty period, a bona fide service is obliged to repair the malfunction or replace the spare part for free. If you changed the screen from a private master "without a check", it will be almost impossible to prove his guilt.
💡
A written guarantee and a check are your biggest asset when you have a problem with the quality of your repairs.