Xiaomi Mi 9T Pro (aka Redmi) K20 Pro in China is still a popular smartphone among users who appreciate performance and performance. AMOLED-But the fragility of glass is its Achilles heel: a fall from 1 meter to asphalt in 70% of cases ends in cracks or complete sensor failure. If you are among the lucky ones to replace the screen, this article will help you understand the nuances of repair: From average market prices to hidden pitfalls when choosing a master.
We analyzed the offers of 47 service centers in Moscow, St. Petersburg, Yekaterinburg and the regions, and also studied user reviews on the 4PDA and Mi Community forums, and it turned out that the price range for the same service can reach 120% - and this does not take into account the quality of spare parts. Why is this happening and how not to run into a fake? Read more.
How much does it cost to replace the screen on Xiaomi Mi 9T Pro in 2026: current prices
The cost of repair depends on three key factors: screen type (original, OEM, The location and status of the service center (official partner of Xiaomi or private workshop) Below is the summary price table as of June 2026 (includes work). + spare):
| Screen type | Moscow/SPB | Regions (millions) | Small towns | Notes |
|---|---|---|---|---|
| Original (Xiaomi) | 18 000–24 000 ₽ | 16 000–21 000 ₽ | 14 000–19 000 ₽ | 12 months warranty, full compatibility with Always-On Display |
| OEM (Factory but not packaged Xiaomi) | 12 000–16 000 ₽ | 10 000–14 000 ₽ | 8 500–12 000 ₽ | 6 months warranty, possible problems with autobrightness |
| Copy (A+ quality) | 6 000–9 000 ₽ | 5 000–7 500 ₽ | 4 000–6 000 ₽ | Warranty 1-3 months., dull colors, possible "broken" pixels |
| Copy (standard) | 3 500–5 000 ₽ | 3 000–4 500 ₽ | 2 500–3 800 ₽ | Without warranty, high risk of sensor detachment in 2-3 months |
⚠️ Note: Prices in the table are for the full range of works (screen replacement) + sensory + Some workshops offer "economical" repairs only with glass replacement (without display module) for 2,000-4,000 ₽, But this approach is fraught with the appearance of yellowness on the screen in 1-2 weeks due to a violation of sealing. OLED-matrix.
Should you pay more for the original? If you want to keep all the features and durability (e.g., the original, DC Dimming to reduce flickering, yes, it's good for budget repairs. OEM-screen, but be prepared for possible color calibration problems.
Original vs. copy: what to choose and what pitfalls
The main difference between the original screen and the copy is not only in price, but also in the technological nuances. 9T Pro used to be used AMOLED-Samsung matrix with support HDR10+. Copies are often collected on cheap matrices from little-known Chinese manufacturers, which affects the production of electronics:
- 🎨 Color Rendering: The original covers 100% of the color space DCI-P3, copies – 80-85% (green and blue shades pale noticeably).
- ☀️ Brightness: the original gives up to 600 nits, copies - 400-450 nits (problems with readability in the sun).
- 🔄 Sensor sensitivity: in copies, touches often float around the edges of the screen.
- 🔋 Energy consumption: Non-original matrices can increase battery consumption by 10-15%.
⚠️ Note: If you are offered an "original" screen for a price below 15,000 ₽ Moscow or 12,000 ₽ Official Xiaomi suppliers don't work with such low margins. Check the part certificate or ask for a package (the original must have a hologram sticker with a silk-like design). QR-code).
There are advantages of copies: some workshops install screens with already glued protective glass (in the original it is not), which saves 500-800 ₽ Also, copies often come with pre-calibrated white, whereas the original may require manual adjustment to Settings. → Display. → Color mode.
How to distinguish the original screen from the copy after installation?
Where to repair: official service vs. private workshops
Choosing a repair site is always a compromise between price, speed and quality, and consider the pros and cons of each option:
- 🏢 Official Xiaomi Service Centers: ✅ 12 months guarantee for work and spare parts. ✅ They only use original screens. ✅ Free diagnostics before repair. ❌ Highest prices (20-30% more expensive than the market). ❌ Repair period – 3-7 days (in private workshops – 1-2 hours). ❌ Often refuse to repair phones with unofficial firmware.
- 🔧 Authorized Partners of Xiaomi: ✅ Prices are 10-15% lower than in official centers. ✅ 6-12 months warranty. ✅ Faster than official service (1-2 days). ❌ Can be installed OEM-Parts instead of original parts. ❌ Not all workshops have certified specialists. AMOLED-screen.
- 🛠️ Private workshops: ✅ Lowest prices (you can find a replacement for 5,000-7000) ₽). ✅ Renovation in 1-2 hours (sometimes right in front of you). ✅ Ready to work with any firmware and modifications. ❌ 1-3 month warranty (or no warranty at all). ❌ High risk of getting into poor quality parts. ❌ There is no specialized testing equipment AMOLED.
💡 Tip: Before you give the phone for repair, make a backup copy of the data through Settings → System system → Backup or by using the Mi program PC Even in official services, there are cases of data loss when replacing the screen (especially if you need to despatch the battery plume).
Make a backup copy of the data (photos, contacts, SMS)
Make sure your phone is turned on (even with a broken screen)
Record IMEI (type *#06#)
Take a picture of the external damage to the body
Check with the wizard if the Face Unlock settings will remain-->
Step-by-step: how to replace the screen yourself
If you're going to make a self-repair, be prepared for 2-3 hours and require care, 8/10 (due to the fragility of the plumes and the need to work with glue) and a brief guide with key points.
Required tools and materials:
- 🔨 Set of screwdrivers (cross-haul) PH00, flat 1.5 mm, tweezers).
- 🔥 dryer or heat tile.
- 🧲 Screen-take-down suction cups.
- 📱 New screen module (recommended) OEM from LongTen or JDI).
- 🧴 Clay. B-7000 orthopedic.
Step-by-step process:
- Turn off the phone and remove it. SIM-map.
- Heat the screen edge with a hair dryer (60–70°C) for 2-3 minutes.
- Tap the screen with suction cups and carefully separate it from the body (start at the bottom edge).
- Disconnect the battery and screen plumes (use a plastic spatula!).
- Transfer to the new screen a metal frame, speaker and touch button.
- Connect a new screen, check the performance (sensor, backlight, colors).
- Apply the glue around the perimeter and press the screen (use clamps for 1-2 hours).
⚠️ Attention: The most common mistake you make when you replace yourself is to damage the battery plume, and if you break it, the phone will stop turning on, and it will cost you 3,000 to 5,000 dollars to repair it. ₽ Also be careful with the flexible plume of the screen: it can not be bent at an angle of more than 90.°.
💡
Before you assemble your phone, check the tightness of the case: put it in a bag of silica gel for 12 hours, if condensation appears inside, then the glue is applied incorrectly, and over time, moisture will accumulate under the screen.
Frequent screen replacement problems and how to avoid them
Even after professional repairs, Mi 9T Pro owners face unpleasant surprises, and here are the most common problems and ways to solve them:
| Problem. | Reason. | Decision |
|---|---|---|
| The screen flickers or spontaneously changes brightness | Poor quality plume or poor contact | Reconnect the plume or replace it (cost 800-1 500) ₽) |
| It doesn't work Always-On Display | A copy of the screen is installed without AOD support | Include in settings Settings → Display. → Always-On Display → Mode “Hours only" |
| The colors look dull or with a greenish tint | Incorrect calibration of the matrix | Calibrate in the Engineering Menu (#6484## → Display Test) |
| Sensor responds poorly to touching edges | Incorrectly installed sensor layer | Reinstall the screen or update the sensor firmware |
| There are broken pixels. | Matrix marriage or mechanical damage during installation | Replace the screen with warranty (if any) |
If the phone is running out faster after changing the screen, check settings in Settings → Battery → Battery Use. Sometimes non-original screens consume 15-20% more power due to a non-optimized driver, in which case a factory reset (Settings → System → Reset) will help.
💡
If the phone doesn't turn on after repair, don't panic: 90% of the time, the problem is with the battery or screen being disconnected. Return to the workshop, it'll take 5-10 minutes to fix.
How to save on screen replacement: 5 proven ways
Replacing the screen with the Mi 9T Pro is not the cheapest procedure, but there are ways to reduce costs without compromising quality.
- 🛒 Buy the screen yourself: In workshops, they often charge 30 to 50 percent for parts, OEM-The screen can be ordered on AliExpress for 6,000-8000 ₽ (In the workshop it will cost 10,000-12,000 ₽).
- 📅 Search for stocks: Many services offer 10-20% discounts at the beginning of the month or before the holidays.
- 🔄 Exchange old screen: Some workshops accept broken screens as a cost offset for a new one (discount up to 1,000-1,500). ₽).
- 🤝 Arrange for barter: If you have skills (like a web designer or electrician), offer your services to the wizard in exchange for a discount.
- 📱 On Avito or Yula you can find working modules from disassembled phones for 4000-6000 ₽.
⚠️ Note: If you buy the screen yourself, make sure it is suitable for the Mi. 9T Pro (model) M1903F10G). Screens from Mi 9T (without Pro) not compatible due to different plume connectors!
Another way to save money is insurance, and if you have an extended warranty when you buy a phone (e.g., through Sberbank Insurance or Alpha Insurance), the repairs can be free. Check your policy: often insurance cases include falling and damaging the screen.