How much does it cost to replace the display on Xiaomi Redmi Note 10 Pro in 2026: the full guide
The broken screen on the Xiaomi Redmi Note 10 Pro is one of the most common breakdowns faced by owners of this smartphone. The model, released in 2021, is still popular due to its balanced characteristics, but its features are not very popular. AMOLED-A 120Hz display is vulnerable to mechanical damage, and the cost of replacing the screen varies depending on the type of module (original or analogue), region and status of the service center. In this article, we will analyze current prices for 2026, the nuances of choosing a master and ways to save without losing quality.
It is important to understand that the Redmi Note 10 Pro has two display options: with a touch layer integrated into the matrix (OGS-It's a different touchscreen, and it affects the complexity of the repair and the final price, and it's also going to affect the cost of additional damage, like a cracked back, or a damaged plume.
Factors Affecting the Cost of Screen Replacement
The price of repair of the Redmi Note 10 Pro display is not fixed — it depends on several key parameters. Let's consider them in detail so you can estimate the upcoming costs.
1. The type of module being installed is the main price driver.
- 🔹 Original display (OEM) — It is manufactured in the same factory as the components for Xiaomi, guaranteeing 100% compatibility, but costs the most (from 8000 to 12 000). ₽).
- 🔹 High quality analogue (A)+, Copy 1:1 – Copies from verified Chinese manufacturers (e.g., Copy, JDI or BOE). Price: 4,500-7000 ₽. Quality is close to the original, but there may be minor differences in color reproduction.
- 🔹 The low-cost version (Copy) is a cheap module with a simplified assembly. Cost: 2,500-4000. ₽, but the risk of defects (flickering, non-functioning zones) reaches 30%.
2. Complexity of repair. On the Redmi Note 10 Pro, replacing the screen requires:
- 🛠️ Dismounting of the front panel (glued on bilateral scotch and glue).
- 🔌 Disconnect battery plumes, speaker and cameras.
- 🔧 Connector soldering (if damaged).
In service centers, from 1,500 to 3,000 people are charged for work. ₽, depending on the speed of execution (express repairs are more expensive).
3. Additional services that may be required:
- 🔋 Replacement of the battery (if damaged during dismantling) — +2 000 ₽.
- 📶 Diagnosis of the motherboard (if a short circuit is suspected) — +1 000 ₽.
- 🔊 Repair of a speaker or microphone – from 800 ₽.
Comparison of prices in official and informal services
Xiaomi’s official service centers offer a warranty for repairs (usually 6 months), but their prices are 20-30% higher than those of private workshops.
| Type of service | Cost of the module | Cost of work | Final price | Guarantee |
|---|---|---|---|---|
| Official Xiaomi service | 10 000–12 000 ₽ (OEM) | 2 500 ₽ | 12 500–14 500 ₽ | 6 months |
| Authorized partner | 8 000–9 500 ₽ (OEM) | 2 000 ₽ | 10 000–11 500 ₽ | 3–6 months |
| Private workshop (premium) | 6 000–7 500 ₽ (A+) | 1 500 ₽ | 7 500–9 000 ₽ | 1-3 months |
| Private workshop (economy) | 3 000–4 500 ₽ (Copy) | 1 000 ₽ | 4 000–5 500 ₽ | No, 1 month. |
Important: official services often impose a full diagnosis (more +1 000–1 500 ₽), Even if only the screen is damaged, private craftsmen usually limit themselves to visual inspection.
⚠️ Warning: When replacing the display in unofficial services there is a risk of losing water protection (IP53). Official centers restore tightness with a special glue, but this increases the cost by 500-800 ₽.
Where to buy a display for self-replacement
If you're choosing to replace your screen yourself, you can save money on your work, but it's important to choose a reliable parts supplier.
1. AliExpress is the most popular source among the masters.Module prices for the Redmi Note 10 Pro:
- 📦 Original. OEM — 6 500–8 000 ₽ (Delivery 2-3 weeks.Sellers: Xiaomi Original Parts Store, MI Official Store.
- 📦 Analogue A+ — 3 500–5 000 ₽ (1–2 week delivery recommended brands: JDI, BOE, Tianma.
- 📦 Budget Copy - 2,000–3,000 ₽ (delivery 10-20 days, marriage risk up to 20 days%.
2. Russian spare parts stores - faster delivery, but prices are higher by 15-20%:
- 🏬 GSMMoscow – gsmmoscow.ru (originals from 8 500) ₽, 4,800-plus ₽).
- 🏬 MobilPart - mobilpart.ru (wide range, there are video reviews of modules).
- 🏬 FixPriceService - fixpriceservice.ru (wholesale prices when buying from 3 pieces).
3.B/U displays – can be found on Avito or Yula for a price of 2,500-4000 ₽, But this is a lottery: the screen may have hidden defects (burnt pixels, uneven backlighting).
View reviews about the seller (rating > 95%)
To clarify compatibility with the phone version (M2007J3SY - global, M2007J3SC - for China)
Check for all the mounts and mounts in the set
Compare the module serial number with the original (the box must have a Xiaomi sticker)-->
Step-by-step instructions for replacing the display with your own hands
If you decide to repair yourself, follow this instruction: run time: 1.5-2 hours.
- 🔧 Set of screwdrivers (cross, flat, Torx) T3/T4).
- 🔥 Hair dryer or a station for heating glue (temperature 60-80)°C).
- 🧲 Screen-take-down suction cups.
- 📏 Plastic mediators (to separate panels).
- 🔌 Tester for plume testing.
Step 1: Preparing the phone
Turn off the Redmi Note 10 Pro, retrieve SIM-card and memory card. Warm up the edge of the screen with a hair dryer for 2-3 minutes to soften the glue. Don't send hot air to the battery!
Step 2. Remove the front panel
With a suction cup, gently lift the screen from the bottom edge, insert a plastic mediator into the gap, and slowly lead along the perimeter, separating the panel. Be careful - the battery and display plumes are very fragile!
Step 3: Disconnect the plumes
Unscrew the 4 screws that hold the metal plate over the plumes. Carefully disconnect the connectors of the display, battery and fingerprint sensor (if any). Use tweezers or a special hook.
Step 4: Installation of a new display
Connect the new module's plumes to make sure they're tightly seated in the connectors. Check the screen performance by plugging your phone into the charger (don't turn on the battery!). If you have an image, stick the panel onto a new two-way tape (recommended 3M 9485).
Step 5: Assembly and testing
Turn all the screws, check the touchscreen and the sensors, and if the screen doesn't respond to touch, reconnect the plumes or test them with a tester.
⚠️ Note: If you replace yourself, you lose the official Xiaomi warranty (if it is still valid), and the risk of damage to flexible plumes is high - they will cost 1,500-2,500 to repair. ₽.
💡
Before gluing the new screen, wipe the phone frame with alcohol - this will remove the remnants of the old glue and improve adhesion.
Frequent Display Replacement Mistakes and How to Avoid Them
Even experienced craftsmen sometimes make mistakes that lead to additional costs.
1. Damage to battery plume
If you take your screen off sloppy, you can tear a thin plume from the battery to the motherboard, and the consequences are that the phone doesn't turn on or charge, and the solution is always to turn off the battery first (unplug the connector).
2. Incorrect installation of the fingerprint sensor
On the Redmi Note 10 Pro, the fingerprint scanner is built into the screen, and if you don't plug it in or confuse the polarity, the sensor won't work. Solution: check the connector locations on a schematic basis (you can find it in the repair manual).
3. Dust hitting the screen
If you put your phone in a dusty room, you'll have particles under the display that you can see when you turn on the backlight, so you can use an antistatic mat and clean the parts with compressed air.
Incompatibility of the module
Cheap analogues may not support automatic brightness adjustment or 120Hz frequency. Solution: Buy modules labeled M2007J3SY (for the global version of the phone).
5. Overheating at soldering
If you solder connectors yourself, the soldering iron temperature should not exceed 300 ° C. Otherwise, you can damage the tracks on the board. Solution: use a temperature-adjusted thermo-air station.
What if the screen flashes or does not turn on after replacement?
How to save on the replacement of the display: 5 proven ways
Repairing the Redmi Note 10 Pro screen can cost a tidy sum, but there are legal ways to reduce costs:
1.Look for shares in service centers
Many workshops offer discounts of up to 20% at the beginning of the month or by promotional codes. For example, in the Connected Service, you can often buy coupons for Xiaomi repairs.
2. Buy the display wholesale
If you have friends with the same phone model, order modules together – many sellers give a 10% discount when buying 2.+ For example, AliExpress can save up to 1,500 dollars. ₽.
3.Use trade-in
Some services (e.g. iFix or TechnoDoctor) offer to exchange an old phone for a discount on repairs.If the Redmi Note 10 Pro is in poor condition, you can get up to 2,000 ₽ cashback.
4.Repair in regional workshops
In Moscow and St. Petersburg, prices are 15-25% higher than in cities with a million inhabitants (Kazan, Novosibirsk, Yekaterinburg), for example, replacing the screen in Krasnoyarsk will cost 6,000-7000. ₽ 9,000 to 10,000. ₽ capital.
5 Damage insurance
If you bought the phone on credit or on insurance (e.g., at Sberbank or AlphaInsurance), check if the policy covers screen repairs. In some cases, the insurance company will pay up to 80% of the cost.
💡
The most reliable way to save money is to buy the original module on AliExpress and then install it in a proven workshop, which is 30-40% cheaper than the official service, but maintains quality.