Replacement of the display on Xiaomi Redmi 9T: 2026 prices, where cheaper and how not to run into fraud

Introduction: Why Redmi screens break down 9T and when you need a replacement.

Xiaomi Redmi screen 9T β€” One of the most vulnerable points of the smartphone, despite the declared protection of Gorilla Glass 3. Falling from a height of only 30-50 cm on asphalt or tiles often ends in cracks, "web" or complete sensor failure. In 80% of cases, after mechanical damage, a complete replacement of the display module is required - repairing the matrix or glass layer separately is more expensive and less reliable.

But it's not always the user's fault: the defect can occur without hitting. 9T The problem with yellow spots on the screen after 1-2 years of operation is the degradation of the adhesive layer between the matrix and the glass. In such cases, the replacement of the display is often covered by a warranty (if the phone is officially purchased.

In this article, we will examine:

  • πŸ” Current prices for screen replacement in 2026 (original vs. copy)
  • πŸ› οΈ Where to repair: service center, private workshop or independently
  • ⚠️ Typical Repair Lies and How to Avoid Them
  • πŸ’‘ Ways to save money without risking your phone

πŸ“Š Where do you plan to repair Xiaomi Redmi? 9T?
Official Xiaomi service
Private workshop
I will order the spare parts myself.
I haven't decided yet.

How much does it cost to replace the display on Redmi? 9T 2026: Price comparisons

The cost of repair depends on three factors: the type of display (original or copy), the region (prices in Moscow and the regions can vary by 20-30%) and the complexity of work (for example, if the backlight or plume is damaged).

Type of displayCost of the spare part (β‚½)Cost of work (β‚½)Final price (β‚½)Where to buy/replace
Original (OEM)Xiaomi with a guarantee5 500 – 7 2001 500 – 2 5007 000 – 9 700Official services, verified workshops
Copy (A)+)High quality, close to the original2 800 – 4 0001 200 – 2 0004 000 – 6 000Private workshops, AliExpress (independently)
Copy (A) Medium quality, possible defects1 500 – 2 5001 000 – 1 8002 500 – 4 300Low-budget workshops, markets
Original D/O shot from other phones3 000 – 5 0001 500 – 2 5004 500 – 7 500Avito, Yula, Telegram chats

Importantly, the prices of original displays have risen 15-20% since 2023 due to the dollar and logistical issues, and copies have fallen in price, but their quality has become less predictable, with many workshops saving on suppliers.

Should you overpay for the original? It depends on your priorities.

  • βœ… Original will last longer (guarantee 6-12 months), color more precisely, there are no "broken" pixels.
  • ❌ Copy A+ It can work for a year without problems, but is often 10-15% dimmer and worse black.
  • ⚠️ Copy A – lottery: can go in waves in a month or last six months.

πŸ’‘

Before you change the display, check if the warranty period on the phone has expired. 9T purchased officially less than a year ago, repairs can be free of charge - even for mechanical damage (under the program "Xiaomi Care").

Official service vs. private workshop: where cheaper and more reliable

Choosing between a Xiaomi service center and a private workshop is always a trade-off between price, speed and quality, and let’s look at the pros and cons of each option.

🏒 Official Xiaomi Service Center

Pros:

  • πŸ”§ Work and parts warranty (usually 12 months).
  • πŸ“¦ Use only original displays with factory calibration.
  • πŸ›‘οΈ Diagnosis before repair (free if you agree to the repair).

Cons:

  • πŸ’° Expensive by 20-30% compared to private.
  • ⏳ Repair period – 3-7 days (in private workshops often do 1-2 hours).
  • πŸ“ Not all cities have official services (you have to send your phone by mail).

πŸ”§ Private workshop

Pros:

  • πŸ’΅ Prices are lower by 30-50% (especially if you agree to a copy of the display).
  • ⚑ Quick repairs (often β€œwhile you wait” or 1-2 hours).
  • πŸ“± You can agree to replace only glass (if the matrix is intact).

Cons:

  • ⚠️ The risk of running into a poor quality spare part (especially if the workshop does not give a guarantee).
  • πŸ”„ The warranty is usually 1-3 months (or not at all).
  • πŸ› οΈ Not all of the workshops are able to work with Redmi. 9T β€” You can get a damaged plume or a broken sensor.

⚠️ Attention: Some workshops deliberately understate the price of repairs, and then "find" additional problems (for example, "burned chip backlight"). Always require preliminary diagnosis with fixation of defects on paper.

Find out which display you will be using (original or copy)|Ask about the work guarantee and spare parts|Check out the workshop reviews (especially on Xiaomi repair forums)|Find out how long the repair will take.|Ask to show the new display before installation-->

Replacement of the display: is it really possible to save money?

If you have experience in electronics repair, replace the display with a Redmi. 9T But it's a risky venture, because it's easy to disable the phone if you unplug the plumes or overheat the ration board.

How much will you save?

  • πŸ’° Part: Original display on AliExpress β€” ~5 000 β‚½ (in the workshop, 6,500 β‚½). Copy A+ β€” ~2 500 β‚½ (in the workshop, 3,500 β‚½).
  • πŸ› οΈ Tools: Set for repair (suction cups, mediators, screwdrivers) β€” ~1 000 β‚½ (once).
  • ⏱️ Time: 1–3 hours (if you’ve never taken your phone apart, it can take a whole day).

What will be needed to replace:

  • πŸ”§ Set of screwdrivers (cross, flat, torks) T3–T5).
  • 🧲 Suction cups for screen removal (better two - for a uniform separation).
  • πŸ”₯ Hair dryer or thermo-air station (to soften the glue).
  • πŸ“± New display (check compatibility by model number) M2010J19SG).
  • 🧴 Clay. B-7000 or double-sided tape to fix the screen.

⚠️ Warning: If you replace yourself, you lose your warranty (if it still works) and risk damaging the board, such as the touchscreen plume on the Redmi. 9T Very fragile - it is easy to break with careless removal.

Step-by-step instructions for replacing the display with photos and videos can be found on 4PDA Or iFixit. But consider Redmi. 9T has a glued body, and to open it will require heating to 70-80Β°C. Without experience, it is easy to overheat the battery or damage the camera.

What happens if you connect the display loop incorrectly?
If you confuse the connectors or loosely fix the plume, the screen can: - Not turn on at all (black screen). - Work with artifacts (strips, flicker). - Do not respond to touch (the sensor does not work). - Have "broken" pixels or uneven backlighting. In 50% of cases, the problem is solved by reconnecting, but sometimes a plume replacement is required (~1 500 β‚½).

Typical Display Replacement Cheats and How to Avoid Them

The smartphone repair market is teeming with scammers, and Xiaomi Redmi 9T β€” Here are the most common deception schemes and defenses:

πŸ”„ "Replacement of the original display with a copy

The studio promises to put the original screen, but in fact installs a cheap copy at a price. OEM-How to check the parts:

  • Ask to show the display before installation – the original should have a Xiaomi hologram and serial number.
  • Compare brightness and color with another Redmi 9T (The original is always brighter and more juicy).
  • Check the response to sunlight – copies often reflect blue or green.

πŸ’Έ Imposing unnecessary work

Classics: "You've got a burnt chip, you need to change" or "Battery bloated, urgently replaced."

  • Demand a written diagnosis with a list of defects before disassembling the phone.
  • If in doubt, go to another workshop for a second opinion.
  • Remember: after a fall, the battery can really damage, but this is visible by the bloating of the body.

⏳ Delaying repair time

The phone was repaired, but the delivery time is constantly postponed?

  • The shop is waiting for the parts (check when they arrive).
  • Your phone is used for β€œdonor” parts (if other devices are repaired).
  • Just a sloppy job - they took a lot of orders and can not cope.

What to do:

⚠️ Warning: If after repair, the screen has become worse in the cold (dimming, stripes appear), you have a poor-quality copy. 9T It works steadily at temperatures from -10°C +40°C.

How to Save Money on Replacing a Display Without Risk

Replacing the screen isn't cheap, but there are legal ways to reduce costs without compromising quality.

1. Buying a display yourself

If you trust a repair shop, but you buy a display yourself, you can save 10-20%.

  • 🌍 AliExpress – original displays from 5000 β‚½, copy+ 2,300 β‚½ (Look for sellers with a rating of 98%+).
  • πŸ›’ Avito/Yula - used originals from 3 000 β‚½ (Check before buying!).
  • 🏒 Local suppliers – in Moscow and St. Petersburg there are wholesale sellers of spare parts for Xiaomi.

2. Promotions and discounts in service centers

Many official and private workshops hold actions:

  • 🎁 10-15% discount on the presentation of a check for the purchase of a phone.
  • πŸ“… "Free diagnostics hour (for example, on Mondays).
  • πŸ”„ Free glass replacement when buying a display (if the matrix is intact).

Follow the promo on the sites of services or in groups Vkontakte.

3. Insurance or extended guarantee

If you bought a Redmi 9T With an extended warranty (e.g., Xiaomi Care or through a bank), check if it covers the replacement of the display. Often, even for mechanical damage, repairs are 2-3 times cheaper.

4.Exchange for another phone

If the repair costs more than 50% of the price of the phone (and Redmi) 9T In 2026, you can buy a second ~8 000 β‚½), Consider the trade-in option. Many communication salons accept broken phones for the purchase of a new one (for example, in the "Svyaznoy" or "MTS").

πŸ’‘

The most reliable way to save money is the combination of β€œbuying a display on AliExpress”. + repairs in a checked workshop. So you only pay for the work (~1 500 β‚½) You get the original part at the wholesale price.

FAQ: Answers to Frequent Questions About Replacing the Redmi Display 9T

πŸ” Can you replace only the glass, not the entire display?
Theoretically, yes, but on Redmi. 9T It's almost never profitable. It's glued to a matrix, and you need to replace it with, "Warm up to 100."Β°C to separate the glass, clean the glue residue (risk of damaging the matrix), paste the new glass with perfect precision (otherwise bubbles) and cost 3,000 to 4,000. β‚½, And the result is often worse than a complete display replacement, except if the matrix is intact and the cracks are only on the glass.
⏳ How long does it take to replace the display?
Depending on the workshop: Official service: 3-7 days (due to queue and diagnostics); Private workshop: 1-3 hours (if spare part is available); Self-service: 2-5 hours (without experience it can take all day); Specify the terms in advance - some services charge extra for urgent repairs (for 1 hour).
πŸ”‹ Will the replacement of the display affect the battery?
Replacing the screen itself does not affect the battery, but there are nuances: If the power plume is damaged during repair, the phone may not charge. When the case is heated (for example, a hairdryer), the battery may swell, as can be seen by the bulge of the back cover. After replacing the display, battery consumption can increase by 5-10% if the new screen is less energy efficient (relevant to copies). If after repairing the phone becomes more quickly discharged, check the brightness settings and auto-regulating the backlight.
πŸ“± Can I use a phone with a cracked screen?
Technically, yes, but it's dangerous: 🩹 Cuts: Sharp edges of glass can cut fingers. πŸ”Œ Short circuit: If the crack has reached the matrix, moisture or dust can cause CZ. πŸ“‰ Worsening over time: Cracks spread, the sensor will stop working. If the cracks are small and do not interfere, cover the screen with glass film (for example, Spigen Glas.tR)>) β€” This will temporarily protect against cuts and dust.
πŸ’‘ How to check if the original display has been installed?
Here are 5 ways to distinguish the original from the copy: Hologram: The original display has a Xiaomi sticker with a hologram and serial number. Brightness: The original is 20-30% brighter (check maximum brightness in the settings). Colors: On the copy, black is often gray and white is yellow. Oleophobic coating: The original fingers slide better, the copies remain greasy marks. Sun work: The original does not dim in direct rays, the copy can become cloudy. You can also check the serial number through the display (#46)