Replacement of the display on Xiaomi Redmi 9C: prices 2026, where cheaper and how not to overpay

Xiaomi Redmi 9C remains one of the most popular budget smartphones even 3 years after its release. But its weak point is the fragile display: falling from a height of 1 meter often ends in cracks, a “web” or complete sensor failure. If you are faced with this problem, the first question arises: how much does it cost to replace the screen and where to do it more profitable – in a service center, a workshop or with your own hands?

In this article, we will look at the current prices of 2026 for original and non-original modules, compare the cost of work in official and informal services, and uncover the hidden risks of cheap repairs, which are not discussed by the masters, you will learn how to save up to 40% without loss of quality and what to do if the screen becomes worse after replacing.

How much does it cost to replace the display on the Redmi 9C in 2026: a comparison of prices

The cost of repair depends on three factors: the type of module (original, copy, restored), the region (prices in Moscow and the regions can vary by 20-30%) and the status of the service (the official partner of Xiaomi or the “garage” workshop).

⚠️ Warning: Prices for original modules have risen 15-20% since 2023 due to logistical issues and the rise in the dollar.Non-original Class A screens+ (with minimal differences from the original) have become more popular – their quality has improved, and the difference in price remains significant.

If you are offered a replacement for less than 2,500 ₽, They're probably using a C or D class module with poor color reproduction and uneven lighting, and these screens often fall off after 2-3 months because of cheap glue.

Official service vs. informal workshops: where is the best?

Xiaomi’s official service centers guarantee quality parts and work, but their prices are higher by 30-50%.In Moscow, for example, replacing the original display in an authorized center will cost 7,500-8,500 ₽, whereas in a tested workshop with good reviews - 5,000-6,500 ₽ same module.

Advantages of official service:

• 🔹 Work and parts warranty (usually 6-12 months).
• 🔹 Only original modules are used.
• 🔹 Diagnosis before repair (free or for 500 dollars) ₽).

Cons:

• ❌ Long repair time (3-7 days vs 1-2 hours in the workshop).
• ❌ High price for work (up to 2,500) ₽ only for replacement).
• ❌ Often refuse to repair smartphones with traces of self-opening.

Informal workshops save on spare parts and time, but it is important to choose a proven craftsman, for example, in St. Petersburg, replacing the screen class A.+ It'll cost 4,000 to 5,000. ₽, a in the regions (for example, in Yekaterinburg or Novosibirsk) – 3,500-4,500 ₽.

💡

Before choosing a workshop, check the reviews on Yandex.Maps or 2GIS. Pay attention to the before/after photo and mentions of the warranty. If the wizard refuses to show the module before installation - this is a reason to be wary.

Replacement of the display: is it really possible to save money?

Replace the screen with Redmi 9C You can do it with your own hands, but it requires precision and minimal skills. The main advantage is the savings of 1,500-2,500. ₽ But there are pitfalls:

• 🛠️ Need tools: plastic shoulder blades, sucker, screwdriver T3, hair dryer or heat tile (cost 800-1 500) ₽, If you buy new ones).
• 🔥 Risk of damaging plumes or motherboard if a negligent autopsy.
• ⏳ The process will take 1-2 hours (in beginners - up to 3-4 hours).

Step-by-step:

1. Turn off the phone and remove it. SIM-map.
2. Heat the edges of the screen with a hair dryer (temperature 60–70°C) to soften the glue.
3. Tap the display with a plastic spatula, starting at the bottom edge.
4. Disconnect the battery and display plumes (the photo connectors are in parse below).
5. Install a new module, plug in the plumes and seal the screen with double-sided tape or B-7000 liquid glue.

Buy a Class A+ display (e.g., on AliExpress for "Redmi 9C LCD+Touch Original Level")

Prepare tools: plastic shoulder blades, sucker, screwdriver T3, hair dryer

Download the disassembly manual (YouTube video: search for "Redmi 9C disassembly")

Turn off the phone and take it out. SIM-pre-work-card-->

⚠️ Warning: If the screen doesn't respond to touch or if there are severities in the image, you've probably damaged the plume or plugged the connector incorrectly, 80% of the time, this is fixable by reconnecting, but sometimes you need to replace the plume (still). +1 000–1 500 ₽).

Which display to choose: original, copy or restored?

The choice of module depends on the budget and quality requirements.

1. Original (OEM) display

Pros: perfect color reproduction, no yellow spots, long service life (3-5 years). Cons: high price (4 500-6 000 ₽), It is hard to find in the regions.

Class A+ copy

Pros: 90% repeats the original, the price is 2 times lower (2200-3500) ₽). Cons: slight differences in brightness (by 5-10% dimmer), sometimes worse oleophobic coating.

3. Refurbished (refurbished)

Pros: Lowest price (1,800–2,800) ₽). Cons: there may be microcracks, uneven illumination, short service life (1-2 years).

4. Copy of the class B/C

Pros: Cheap (1,200–2,000) ₽). Cons: poor color reproduction, “soapy” colors, rapid wear of the sensor.

🔍 How to distinguish a high-quality copy from a fake?

• 📦 It should be on the package. QR-serial-number.
• 🔍 Check for oleophobic coating (a drop of water should roll, not spread).
• 🎨 Compare the colors to the original screen (on Class C copies, white often gives off yellowness).

Hidden expenses: what else will you have to spend?

When replacing the display, there are often additional costs that are not warned in advance, and this can increase the total amount:

⚠️ Warning: If the wizard says you need to replace the motherboard because of a burnt-out screen controller, ask another specialist for a diagnosis. In 60% of cases, the problem is solved by soldering contacts (cost 1,500-2,500). ₽ instead of 5,000-7,000 ₽ charge).

Another trick is to replace the charging plume or the speaker "at the same time," and check the performance of these components before repairs, so you don't have to pay for unnecessary work.

Frequent problems after replacing the display and how to avoid them

Even after a successful replacement, the screen may not work properly, and here are the most common problems and solutions.

• 🔄 The screen flickers or spontaneously turns off the reason: bad contact of the plume. Solution: reconnect the connector or replace the plume (cost 500-1000) ₽).
• 🎨 Colors have become dull or yellow Cause: the non-original class module B/C. Solution: replace by A+ original.
• 👆 Sensor reacts poorly to touch, because the touch layer is damaged or the glass is installed incorrectly, so the solution is: reglue the screen or replace the module.
• 🔋 The reason the new screen consumes more power. Solution: calibrate the battery (discharge to 0% and charge to 100% 2-3 times).

💡 Tip: After replacing the display, reset the phone to factory settings (Settings) → System system → Resetting settings. This will help avoid software conflicts with the new screen.

💡

If you have artifacts (strips, divorces) after you replace the display, don't accept a repayment - this is a guarantee. Demand a free reinstallation of the module or a refund.

Where to buy spare parts for Redmi 9C: verified sellers

The display quality is 80 percent vendor-dependent, and we tested a number of sites and ranked them as reliable suppliers.

1. AliExpress Pros: Low Prices (2,200–3,500) ₽ A+ Cons: delivery 2-4 weeks, risk of marriage. Recommended shops: HYELE Store, DIGITAL WORLD STORE, JM COMMUNICATION.
2. Pros: fast delivery (3-5 days), return guarantee. Cons: prices are 10-15% higher than on AliExpress. Recommended sellers: FixPriceService, Mobile.
3. Avito / Yula Pros: you can bargain, sometimes you come across the originals for the price of a copy. Cons: high risk of running into a fake. Advice: ask for a photo of the package and a screen test for health.
4. Official partners of Xiaomi Pluses: 100% Original parts. Cons: prices in 1,5–2 It's more than a privateer's. mi.com/ru/service.

🔍 How to check the display before buying?

• Ask the seller to make a video with a color test (displaying white, black, red, green, blue).
• Make sure that the kit comes with adhesive strips or bilateral scotch.
• Make sure that the module does not have chipped glass and damage to the plume.

FAQ: Answers to Frequent Questions