Xiaomi Redmi 9 remains one of the most popular budget smartphones even a few years after its release. However, its weak point is a fragile display: falling from a height of 1 meter often ends in cracks, broken pixels or complete sensor failure. If you encounter this problem, the first thought is “How much will it cost to replace the screen?” The answer depends on many factors: type of breakage, choice of master, quality of parts and even the region of residence.
In this article, we will analyze the current prices for replacing the Redmi 9 display in 2026, compare the original modules with analogues, tell you where it is cheaper to repair - in a service center or at a private master, and warn about pitfalls that can increase the total amount by 2-3 times.
Spoiler: the minimum price of repair starts from 2,500 rubles (for a non-original module from a privateer), but in the official service with a guarantee you will have to pay up to 8000 rubles.
Types of damage to the Redmi 9 display: what breaks most often
Before we talk about cost, it's important to determine which part of the screen is out of order. In Redmi 9, the display module is made up of several layers, and the price of repair depends on what's damaged:
- 🔹 Cracks on glass are the most common damage. If the sensor is working and the image is displayed normally, you can do with replacing only the protective glass (cheaper 2-3 times).
- 🔹 Broken pixels or stripes indicate damage to the matrix, and this will require a complete replacement of the module.
- 🔹 The sensor doesn't work, it often happens after falling by a corner, sometimes the problem is in the plume, but more often in the touch panel itself.
- 🔹 Black screen with a working phone - can be both hardware (damage to the plume, matrix), and software problem (the display firmware flew off).
- 🔹 Dilutions or slacks under the glass are a sign of moisture, in which case replacing the display often requires additional cleaning of the board.
In 70% of cases, users experience combined damage, such as cracks. + broken-sensor + This automatically leads to a complete replacement of the display module, as it costs more to repair individual components.
⚠️ Warning: If the phone stopped turning on after the fall, the problem may not be in the screen, but in the battery or motherboard, in which case the diagnosis in the service is mandatory - replacing the display will not bring the device back to life.
2.The cost of replacing the Redmi 9 display in 2026: a comparative table
Repair prices vary depending on the type of spare part, region and status of the service center. Below is the current price list for Moscow and the regions (including parts delivery). + spare part (unless otherwise indicated).
| Type of spare part | Cost (Moscow) | Cost (regions) | Guarantee | Features |
|---|---|---|---|---|
| Original Module (Xiaomi) | 6 500 — 8 000 ₽ | 6 000 — 7 500 ₽ | 6–12 months | Full compatibility, all functions are preserved (fingerprint scanner, autobrightness). |
| High quality analogue (A+) | 4 000 — 5 500 ₽ | 3 500 — 5 000 ₽ | 3–6 months | The quality is close to the original, but there may be minor differences in color reproduction. |
| Medium quality analogue (A) | 2 500 — 3 500 ₽ | 2 000 — 3 000 ₽ | 1-3 months | The risk of sensor problems, the possibility of "dead" pixels. |
| Replacement of glass only (with working matrix) | 1 500 — 2 500 ₽ | 1 200 — 2 000 ₽ | 1-6 months | It requires special equipment (laminator). |
| Self-replacement (part) | 1 800 — 4 000 ₽ | 1 500 — 3 500 ₽ | No. | The price is only for the module (work is not included) and the risk of damage to the plume. |
Important: the price does not include diagnosis (300-500) ₽) and additional work, for example:
- 🔧 Replacement of the display plume - 1000-1 500 ₽ (if it broke during the dismantling).
- 🔋 Cleaning of the board from oxidation - 800-1 200 ₽ (humidity).
- 🔄 Reflashing of the display - 500-800 ₽ (If the autobrightness does not work after the replacement).
3. Original vs Analog: What to Choose for Redmi 9
The main question when replacing the display is to take the original module or save on the analogue, let's analyze the pros and cons of each option, based on user feedback and expert tests.
🔹 Original display (Xiaomi)
Pros:
- ✅ 100% compatible with hardware and phone firmware.
- ✅ All functions are saved: fingerprint scanner, autobrightness, True Tone.
- ✅ Warranty from 6 months (in official services - up to 12 months).
- ✅ Color and brightness are identical to factory.
Cons:
- ❌ Price is 2-3 times higher than its counterparts.
- ❌ In the regions may not be available (you have to wait 1-2 weeks).
🔹 High quality analogue (A)+)
Pros:
- ✅ Prices 30-40% lower than the original.
- ✅ Quality is close to factory quality (90% of users do not notice the difference).
- ✅ Quick delivery (usually available).
Cons:
- ❌ Small differences in color reproduction (colder / warmer shade) are possible).
- ❌ Warranty less (3-6 months).
- ❌ In 5% of cases, the fingerprint scanner may not work (firmware is required).
🔹 Medium/low quality analogue (A or Copy)
Pros:
- ✅ Lowest price (from 2,000) ₽).
Cons:
- ❌ Risk of dead pixels or broken zones of the sensor.
- ❌ Color reproduction can be very different (greenish or yellowish tint).
- ❌ Often breaks down in 2-3 months.
- ❌ Autobrightness is not working properly or is not available.
💡
If you want to have full functionality and durability, take the original or class A analogue.+. For a temporary solution (for example, before selling a phone), you can consider a budget option.
Should I pay more for the original?
- 📱 You plan to use your phone for another year or longer.
- 🔒 You need a fingerprint scanner and autobrightness.
- 🎨 You are sensitive to color reproduction (for example, you work with photos).
Not if:
- 💰 Budget is severely limited.
- 📲 You are planning to sell or sell your phone in a trade-in.
- 🛠️ Ready to take risks and remodel if necessary.
4.Where is cheaper to replace the display: service center vs private workshop
Choosing between a service and a garage master is always a compromise between price, quality and warranty, and let’s look at the pros and cons of each option with the Redmi 9.
🏢 Official Xiaomi Service Center
Pros:
- ✅ Up to 12 months warranty for work and parts.
- ✅ Use only original or certified parts.
- ✅ Diagnosis is free (if you agree to a repair).
- ✅ The official warranty on the phone (if it is still valid).
Cons:
- ❌ Highest price: from 6,500 ₽).
- ❌ Long repair period (3-7 days if there is no spare part in stock).
- ❌ Smaller cities may not have a service center.
🔧 Private workshop (or master at home)
Pros:
- ✅ Prices are 20-40% lower (from 3,500) ₽ par+).
- ✅ Quick repairs (1-3 hours).
- ✅ You can negotiate a discount for cash settlement.
- ✅ Often give a guarantee of 3-6 months.
Cons:
- ❌ The risk of running into a poor quality spare part.
- ❌ No official Xiaomi guarantee.
- ❌ Possible problems with the display firmware (if the master is inexperienced).
🛒 Self-sustaining replacement
If you have experience in electronics repair, you can save money by buying a module on AliExpress or at your local parts store.
- 🔨 Cost of the module: 1,800–4,000 ₽ (depending on the quality).
- 🛠️ Tools: you will need a set of screwdrivers, mediator, hair dryer to unplug the screen.
- ⚠️ Risks: damage to the plume, dust under the screen, a broken sensor after assembly.
Why can’t the fingerprint scanner work after self-replacement?
Where is the best repair? The choice depends on priorities:
- 💎 Quality. + guarantee → service.
- 💰 Price. + speed → shop-tested.
- 🔧 Experience + desire to save → stand-alone.
5 Hidden costs: what can be “diluted” in the service
Many users are faced with a situation where the total amount of repairs is higher than the initial announced, and we will tell you about the most common “traps” so that you can avoid them.
🔍 Diagnostics for that»
Some services offer “free diagnostics,” but if you refuse repairs, you are charged 300-500. ₽ «How to avoid: check in advance if the diagnosis is paid, and ask for a written check.
🔄 «Additional work»
Classic scheme: you are told that when changing the screen, you need to:
- 🔋 Replace the battery (even if it is normal).
- 🔌 Clean the charging connector (although the problem is not in it).
- 🔄 Check your phone (although it is not always necessary).
How to check: Ask to show damaged parts or explain why the phone won’t work without additional repairs.
📦 «Original "parts" at the price of analogue
Unscrupulous craftsmen can pass off a cheap Chinese module as the original.
- 🔍 The original module has a Xiaomi marking and serial number.
- 📱 After replacement, check the work of the fingerprint scanner and autobrightness - on analogues they often glittle.
- 📄 Require a check indicating the type of spare part.
⏳ «Urgent repairs for double the price
If you are told that you can do it “urgently” (in 1 hour), but you need to pay 50-100% for it, you are probably just being divorced. In most cases, replacing the display takes 1-2 hours without any “acceleration”.
⚠️ Attention: If after replacing the display, the phone began to discharge faster, check whether the wizard forgot to turn off the diagnostic mode (it turns on when testing the screen and severely puts the battery). → The phone. → Version. MIUI — tap 7 times).
Step-by-step: how to prepare your phone for a display replacement
If you decide to put your phone in repair, follow these steps to avoid data loss and other issues:
☑️ Preparation of Redmi 9 for repair
Pay special attention to backup. Even if the wizard promises not to reset the settings, when replacing the display, you sometimes need to:
- 🔄 Reset to factory settings (if the screen firmware is glitching).
- 🔧 Phone flashing (if the new module is not recognized).
For backup, use:
- 🖥️ Mi Cloud (in Xiaomi account settings).
- 💻 Local copy through Settings → Additionally. → Backup and reset.
- 📱 Third-party applications (e.g. Swift Backup for Android).
If you give your phone to the service, you must:
- 📝 Make the act of reception and transfer with an indication of external damages.
- 🔒 Make sure the wizard doesn’t require a password from your phone (this is not normal!).
- 💳 Pay with a card – it’s easier to challenge a payment if something goes wrong.
💡
Before you hand over your phone for repair, charge it by 30-50%. A fully discharged battery can interfere with diagnosis, and a fully charged one can create a risk of short circuit during disassembly.
7.What to do if after replacing the display there are problems
Even proven services can have problems after repairs, and we'll look at the most common ones and how to fix them.
🔳 Problem: The fingerprint scanner is not working
Reason: The new display module will not be stitched or damaged by the scanner plume.
Decision:
- 🔄 Return to the service – the wizard must reflash the module via Mi Flash or EDL-regime.
- 🔧 If the firmware does not help, the plume may be damaged (replacement is required).
🌡️ Problem: Car brightness is not working
Reason: Analog displays often lack a light sensor or it doesn’t calibrate automatically.
Decision:
- 🔍 Check the settings: Settings → Display. → Autobrightness.
- 📱 Install Lux Auto Brightness for manual calibration.
- 🔧 If the sensor is physically absent, autobrightness cannot be restored.
🎨 Problem: Unnatural colors (greenish/yellowish hue)
Reason: Cheap analogues often have distorted color reproduction.
Decision:
- 🎛️ Try changing the color profile in the display settings.
- 🔄 If it doesn’t work, ask for a better module.
🔋 Problem: The battery goes down quickly
The reason: A new display can consume more power, especially if it’s not the original.
Decision:
- 📊 Check battery consumption in Settings → Battery.
- 🔄 Reset your phone settings (sometimes helps).
- 🔧 If the problem persists, the plume or power controller may have been damaged.
👆 Problem: Sensor responds poorly to touch
Reason: Poor-quality sticker of the module or damage to the touch panel.
Decision:
- 🔧 Return to the service - the master must reglaze the screen.
- 📱 Check the sensitivity in the settings → Additionally. → Touch screen.
⚠️ Warning: If after changing the display, the phone starts to overheat, turn it off immediately! This may indicate a short circuit due to improper assembly!