Owners of the popular Xiaomi Redmi Note 7 smartphone often face the need to replace the top layer of the screen. Touchscreen is a touch panel that responds to touch, and its damage makes it impossible or extremely difficult to use the gadget. The question of how much the touchscreen costs on the Xiaomi Redmi Note 7 becomes relevant immediately after a device falls or cracks appear. The cost of repairs can vary widely, and understanding the pricing structure will help save significant funds.
Modern smartphones, including the Redmi Note 7, often feature displays where the touchscreen and the matrix are glued together in a single module, a technology solution that improves image quality and sensitivity, but complicates and makes repairs more expensive when only glass is broken. However, many service centers and parts stores still have separate touch panels, which is a more budget-friendly solution.
The price of a component depends on many factors, from the quality of the execution (original or quality copy) to the region of purchase and markup of the seller. It is important to understand that a cheap touchscreen can work unstable, have worse sensitivity or quickly fail. In this article, we will discuss in detail the price ranges, savings and nuances that you need to consider before buying a new part.
Factors Affecting the Cost of Touch Panel
The first thing to look out for when looking for a part is the type of screen your device has. - Xiaomi Redmi Note 7 (model) M1901F7G) squash IPS-It's a matrix, but different regions could have used glass from different manufacturers, and original parts will always cost more because they go through strict quality control and fully meet factory specifications. Buying the original guarantees the perfect multi-touch operation and no calibration problems.
Copies and analogs are much cheaper, but there is a risk: Cheap touchscreens can have a less durable glass that is easier to break again, or a layer of oleophobic coating that will be erased after a week of use. In addition, the cost is affected by the package: whether the frame is sold assembled or only bare glass. Replacing the frame simplifies the installation process, but increases the total amount of the check.
Geography also plays a role: In large cities with millions of customers, competition between service centers and electronics stores is higher, which often leads to lower prices; in smaller towns, the cost may be higher due to logistics costs; and the price depends on the exchange rate, since most components are imported from China.
⚠️ Warning: When buying a cheap analog, be sure to check the compatibility of the plume. The connectors may differ in the number of contacts or location, which will make installation impossible without soldering.
Average market prices for touchscreens for Redmi Note 7
Market analysis shows that the price range for touch panels for this model is quite large. If you are looking for an original touchscreen assembled with a display (module), the price can vary from 2500 to 4000 rubles depending on the seller. Separately, touchscreen (touchscreen) without a matrix costs less — in the range from 800 to 1500 rubles for a quality copy. Original sensors are harder to find separately, and their price can reach 2000 rubles.
The cost of replacement work is also included in the total amount if you apply to the service center. Masters usually charge from 1000 to 2000 rubles for the replacement of the module and from 1500 to 3000 rubles for the repainting of glass (replacement of only a touch screen with the preservation of the matrix).
Below is a table showing the approximate price order for various options for components and services:
| Part Type / Services | Quality category | Approximate price (ruble) | Guarantee |
|---|---|---|---|
| Module (Display + Touch) | Original (Service Pack) | 3000 - 4200 | 3-6 months |
| Module (Display + Touch) | Copy (AAA quality) | 1800 - 2500 | 14 days |
| Touchscreen (separately) | Copy | 700 - 1200 | No. 14 days. |
| Replacement of the module in the SC | Work of the master | 1000 - 1500 | Work. |
It is important to note that prices can vary depending on the season and availability of goods in warehouses, and the most profitable option is often to buy a module in the collection category "High Copy" on large online sites, which is cheaper than replacing only glass in the service.
Why are the originals so expensive?
Where to buy: service centers vs. online stores
The choice of the place of purchase directly affects how much the touchscreen costs for the Xiaomi Redmi Note 7 in your particular case. Official service centers offer the highest prices, but guarantee the authenticity and quality of work. Here you pay for peace of mind and confidence that the device will not be damaged during repairs. However, if the budget is limited, this option may not be feasible.
Online stores and marketplaces offer more affordable prices. Buying a part yourself can save you up to 40% of the cost of a turnkey repair. Popular sites allow you to compare the prices of dozens of sellers, read reviews and see the rating, but the risk of getting a defective product or a poor copy in this case falls on your shoulders.
Private workshops are intermediate, often buying parts in bulk and can offer lower prices than official ones, but higher than when buying on the Internet, and private craftsmen have the advantage of being flexible, they can go to meet you and install your part or offer a used screen in good condition.
- 🛒 Marketplaces: huge choice, returns, low prices, but long delivery and risk of marriage.
- 🏢 Service centers: high price, quality guarantee, speed, professional installation.
- 🔧 Private masters: average prices, bargaining ability, speed of execution, but variable quality of spare parts.
💡
Before paying in the online store, be sure to check with the seller whether the product is framed. Replacing the touchscreen with a "bare" glass without a frame requires re-adhesive and special glue, which is difficult to do at home.
Self-Replacement: Is It Worth Saving?
Replacing the touchscreen with a Redmi Note 7 with your own hands is a real way to save money, but it requires caution and minimal technical skills. The process involves disassembling the case, turning off the plumes and tidying up a new part. If you have never held a screwdriver for electronics, the risk of damage to other components (such as a display plume or battery) is quite high.
To successfully replace, you'll need a toolkit: a suction cup, plastic shoulder blades (mediators), a cross screwdriver and, preferably, a hair dryer or heat pad to soften the glue. A B-7000 or similar is needed to fix a new frame or glass. Without high-quality sealing, dust and moisture will enter the smartphone, which can lead to corrosion of the board.
The main difficulty in replacing only the touchscreen (without the matrix) is the separation of the broken glass from the display. This requires special equipment (separator and laminator) or very careful work with nichrome thread and liquid. At home, it is easier and cheaper to replace the entire module assembly, even if the matrix is intact.
☑️ Preparation for self-replacement
If you do decide to repair yourself, be sure to follow the proven video instructions. Take your time and act consistently. Carefulness is the key to success. Damage to the plume when you move carelessly can lead to stripes on the screen or complete failure of the touch screen.
⚠️ Before starting any work be sure to discharge the battery of the smartphone to 15-20% Or shut it off completely. Working with a charged battery when using metal tools carries the risk of short circuit and fire.
How to distinguish a quality touchscreen from a fake
The quality issue is acute, especially when the price difference between the original and the copy is significant. A quality touchscreen should have a uniform application of a black rope around the perimeter. If you see gaps, uneven edges or a floating pattern, you see a poor quality product. Also note the speaker hole and the camera - they should match the body perfectly.
Sensitivity testing is another important step: a good sensor responds to light touch and supports multi-touch (simultaneous pressing with several fingers); cheap copies can have dead zones at the edges of the screen or work with delay; Oleophobic coating on quality glass is pleasant to the touch, the finger slides easily, while on a cheap analogue you can feel “rubber” or rough.
Packaging can also give a clue: Original parts are often shipped in sealed antistatic bags with a label and barcode. Copies can be simply wrapped in bubble film. However, don't rely on the packaging alone, as it's easy to fake.
- 👁️ Visual inspection: no bubbles, smooth black rope, clear glass without scratches.
- 🖐️ Tactile sensations: smoothness of the surface, lack of roughness at the joints.
- 📱 Multi-touch test: check through special applications or built-in tests Xiaomi.
💡
The best way to check the touchscreen before final assembly is to temporarily connect the plume to the board, turn on the phone and check the sensor’s performance without gluing it.