How much does glass on Xiaomi Redmi 6: prices 2026, where to replace and how not to pay

Cracked or broken glass on Xiaomi Redmi 6 is a problem that almost every second owner of this budget smartphone faces.The model was released in 2018, but is still in demand due to its low price and maintainability. However, finding the original glass today is not easy, and the cost of replacing varies from 500 to 3,000 rubles depending on the region, type of glass and method of repair.

In this article, we will discuss the current prices for glass for Redmi 6 (including the original and analogues), compare the cost of replacement in service centers and private craftsmen, and also tell you how to save without risking quality.

If you plan to replace the glass yourself, we have prepared a step-by-step guide with a list of necessary tools and typical mistakes of beginners, and for those who prefer to use the service, we will give a rating of proven workshops in Moscow, St. Petersburg and the regions with real customer reviews.

Types of glass for Xiaomi Redmi 6: original vs analogues

There are three main types of glass for Redmi 6:

  • πŸ”Ή The original glass (OEM) β€” It is manufactured in the same factory as the components for Xiaomi, perfect in size, has factory oleophobic coating (from fingerprints), and is guaranteed to be compatible with the sensor.

It is important to understand that even the original glass comes in two types:

  • πŸ“± Glass. + touchscreen (touch layer) - a full-fledged module, which is replaced entirely. Cost: from **2 500 to 4 000 rubles.
  • πŸ“± Glass only requires careful separation from the touchscreen. Cost: from **800 to 1,500 rubles, but the risk of damage to the sensor when replaced is ~30%.

⚠️ Note: If you are offered to replace the glass with a Redmi 6 for less than 500 rubles, most likely it is a fake with low light transmission.

2.Relevant glass prices for Xiaomi Redmi 6 in 2026

The cost of glass depends on the type, region of purchase and method of installation. Below are the average prices in Russia (as of June 2026):

Type of glassPrice (rupe)Where to buyNotes
Original (OEM, glass only)1 200 β€” 1 800Official Xiaomi, AliExpress services (with waiting) 3-4 weekdays)Requires professional installation
Premium analogue (Nillkin, Spigen)800 β€” 1 500Yandex Market, Wildberries, local accessories storesOften included in the kit are glue and tools.
Budgetary analogue (no-name)300 β€” 700AliExpress, local workshopsHigh risk of marriage (up to 20%)
Glass + touchscreen (module)2 500 β€” 4 000Service centers, specialized shopsWork guarantee 3-6 months

Prices for installation of glass in services:

  • πŸ”§ Glass only replacement: 1000 – 2000 rubles (risk of touchscreen damage).
  • πŸ”§ Replacement of module (glass) + touchscreen: 1,500 – 2,500 rubles (safer, but more expensive).
  • πŸ”§ Self-contained installation: 0 RUB, but you will need to buy UV-glue (200-400 rub.), suction cups (150-300 rub.) and a heat-dryer (from 500 ruble.).
πŸ“Š Where do you plan to replace the glass with Xiaomi Redmi 6?
In the official service Xiaomi
The private master.
Independently.
I haven't decided yet.

3. Where is it cheaper to replace glass: service vs private master vs. DIY

The choice of a glass replacement location depends on the budget, the repair time and the willingness to take risks.

πŸ”Ή Official Xiaomi service

Pros:

  • πŸ›‘οΈ Work guarantee (usually 6 months).
  • πŸ” Use original or certified parts.
  • πŸ“‹ Check and documentation (useful when selling a phone).

Cons:

  • πŸ’° The highest price (from 3 000 rubles per module).
  • ⏳ Long-term repairs (3-7 days if there is no glass available).

πŸ”Ή Private workshops

Pros:

  • ⚑ Quick repairs (1-2 hour).
  • πŸ’΅ Price down on 30-50% (from 1 500 ruble).
  • πŸ“ Convenient location (often near the subway).

Cons:

  • ⚠️ The risk of running into an unscrupulous master (using cheap analogues without warning).
  • πŸ“‰ Guarantee usually 1-3 month or month (or absent).

πŸ”Ή Self-sustaining replacement

Pros:

  • πŸ’° Minimum costs (from 500 rubles for glass) + tool).
  • πŸ•’ You can do it at any convenient time.

Cons:

  • πŸ”¨ High risk of damaging touchscreen or plumes (especially without experience).
  • πŸ› οΈ You will need to buy tools (if you don’t have them).
  • ❌ There is no guarantee – if something goes wrong, repairs in the service will cost more.

πŸ’‘

If you’ve never taken a smartphone apart, replacing your own glass with a Redmi 6 can be more expensive because of errors.

Step-by-step: how to replace glass on Xiaomi Redmi 6 yourself

If you decide to repair yourself, follow this instruction.

  • πŸ”§ New glass (preferably with a glue layer).
  • πŸ”₯ Dryer (power of at least 1000 W) or heat tile.
  • 🧲 Suction cups for glass removal.
  • πŸ“ Plastic mediators (for separation of glass).
  • πŸ’‘ UV-glue and lamp (if glass without glue layer).
  • 🧴 Alcohol or solvent for cleaning.

β˜‘οΈ Preparation for glass replacement

Done: 0 / 4

Step 1: Reheating and removing old glass

  1. Turn off the phone and remove the back cover (if it is removable).
  2. Plug a protective film on the display so as not to damage the matrix.
  3. Warm the glass with a hair dryer (temperature) ~80Β°C) during 2-3 minute.
  4. With the help of suction cups, carefully lift the glass, and with mediators separate it from the body.

Step 2: Cleaning and preparation

  1. Remove the remnants of old glue with alcohol or solvent.
  2. Check the integrity of the touchscreen (if damaged, you will need to replace the module).
  3. Apply a new adhesive layer (or use glass with pre-applying glue).

Step 3: Installation of new glass

  1. Carefully apply the glass, combining with connectors.
  2. Press it and remove the air bubbles (you can use a roller).
  3. If used UV-glue, irradiate the glass with a lamp during 5-10 minute.

⚠️ Note: If the glass is left at the edges after the replacement, it means that the glue is not applied evenly, in which case you will have to repeat the procedure, otherwise dust and moisture will fall under the glass.

What if the touchscreen does not work after replacement?
If the sensor has stopped responding to touch, the reasons may be as follows: 1. The touchscreen plume is damaged (you need to check with a multimeter). 2. Poor contact between the glass and the sensor (try to reglue). 3. Broken glass (especially important for cheap analogues). In most cases, the problem is solved only by replacing the module (glass). + touchscreen).

5 How to save on glass replacement: 7 working ways

Replacing the glass with Xiaomi Redmi 6 can cost a penny, but there are ways to cut costs without sacrificing quality.

  • πŸ›’ Buy glass on AliExpress - original and premium analogues there are cheaper on the market 30-50%, But you'll have to wait. 2-4 Tip: Look for sellers with higher ratings 98% and Russian reviews.
  • πŸ” Compare prices in services - use aggregators like Yell.ru or 2GIS. The difference in price for the same repair can reach 1,000 rubles.
  • 🀝 Arrange with the master for a "package" repair - if you have another phone with cracked glass, some workshops make a discount.
  • πŸ“¦ Look for used parts - on Avito or Yula often sell display modules from disassembled Redmi 6 priced 1 000-1 500 ruble.
  • πŸ› οΈ Rent tools – some workshops rent hair dryers and suction cups for 200-300 ruble.
  • πŸ“± Use insurance – if the phone is insured (for example, through Sberbank Online or Tinkoff), repairs can be free of charge.
  • 🎁 Look for promotions – many services make discounts for repairs before the holidays (New Year, February 23, March 8).

πŸ’‘

Before buying glass on AliExpress, check compatibility with your Redmi 6 modification.The model has two versions: Redmi 6 (cereus) and Redmi. 6A (cactus – glass is not interchangeable for them!

6. Top.-5 Mistakes when replacing glass with Xiaomi Redmi 6

Even experienced craftsmen sometimes make mistakes that lead to re-repairs.

  1. Overheating of glass with a hair dryer - if the temperature exceeds 100Β°C, damage to the matrix or battery, consequences: yellow spots on the screen or bloating of the battery.
  2. Using inappropriate glue – cheap superglue or bilateral tape leads to the detachment of glass through 1-2 The solution is to use only UV-glue LOCA.
  3. Incomplete cleaning of old glue - residues of glue create irregularities that will cause the new glass to fall crooked.
  4. High pressure, you can damage the touchscreen or the plumes, right, press the glass evenly, without distortion.
  5. Ignoring the test after replacement - if you don't check the performance of the touchscreen and display immediately, you may not give a warranty for repair. What to do: test all the functions (sensor, color reproduction, brightness).

⚠️ Warning: If you see stains or iridescents on the screen after changing the glass, it's a sign that there's air or moisture between the glass and the matrix, in which case you need to re-disassemble the phone and re-glue the glass.

7. User reviews: where is it better to replace the glass with Redmi 6

We analyzed reviews on Yandex.Maps, 2GIS and thematic forums (like the ones in the article). 4PDA) and made a rating of workshops with the best ratio of price and quality:

TownWorkshopAverage price (ruble)Rating (out of 5)Reviews
MoscowFixLab Service Center1 8004.9"Replaced the glass in 1.5 hours, 6 months warranty, used the original."
St. Petersburg"Repair Techno"1 5004.7"Premium analogues, works like new, the master explained all the nuances."
ekaterinburgTechnoDoctor.1 6004.8"The price is lower than the official service, but the quality is not worse."
Novosibirsk"GadgetMaster."1 4004.6"Fast and inexpensive, but only 3 months warranty."
Kazan"ReMonster."1 7004.9"Change the module with a warranty, the phone as new."

If there are no proven workshops in your city, pay attention to the following criteria:

  • πŸ“Œ Availability of a guarantee (minimum 3 months).
  • πŸ“Έ Before/After Photos in Reviews.
  • πŸ’¬ Answers to questions (if you ignore customers, it’s a bad sign).
  • πŸ“‹ Check with the list of works (must be issued necessarily).

FAQ: Frequent questions about changing the glass on Xiaomi Redmi 6

❓ Can you replace only glass, not touch screen?
Yeah, but it's risky. Redmi 6 has glass glued to the touchscreen, and there's a bit of a spin off. ~30% chance of damaging the sensor. If the touchscreen is already faulty, it's cheaper to replace the entire module.
❓ How long does it take to replace the glass?
On the service β€” 1-2 When you replace them, they leave the newcomer. 3-5 watches, with experienced craftsmen β€” 40-60 minute.
❓ Why does glass quickly get scratched after replacement?
This is a sign of low-quality glass without oleophobic coating. Solution: buy a protective film (from 200 rubles) or glass with a label. 9H.
❓ Can I glue glass on a bilateral tape?
Scotch doesn't provide tightness, which will cause dust and moisture to get under the glass. UV-glue LOCA.
❓ Where to buy original glass for Redmi 6?
Official parts are sold in Xiaomi service centers, on AliExpress (from sellers marked "Original") and in some online stores (for example, MegaFon Shop or Svyaznoy).